White Container & Cap for Scandvik Part Numbers 10055,10275,10298, & 10826 This is a replacement cap and cup for horizontally mounted recessed showers. Horizontally mounted showers can be distinguished by the shower on the cap. This specific model is a kit (one #10252 cap and one #10253 cup). Note: Pull-out shower/sprayer handle uses cups #10253 (white) or #10264 (black) and a white cap #10252 or a black cap #10263 Mixer valves use the white cup #10335 and the same white cap, #10252 *The "P" within the part number indicates retail packaging

Replacement White Cup & Cap for Recessed Shower This recessed cap and cup design is made with Dupont™ Zytel® Nylon Resin for greater strength and UV exposure resistance. A rubber gasket under the cap will keep water out when the cap is closed.  Features: Requires a 2-3/4 in. mounting hole.    Single white cap and cup NOTE: If you currently have a Scandvik recessed shower with a rubber cap, this latest design version will NOT fit your hole size. You will need to enlarge your current 2 1/4-in. hole to a larger 2 3/4-in. *The "P" within the part number indicates retail packaging

White Vertical Cup & Cap for Scandvik Part Number 1075 This is a white replacement cap and cup for the vertically mounted recessed showers. This part is a kit (one #10030 cap and one #10031 cup). Features: These showers are typically mounted on the side of a center console or any vertical surface You can distinguish the vertically mounted unit by the Scandvik logo on the cap Specifications: Mounting Hole: 2-1/4 in. *The "P" within the part number indicates retail packaging

Recessed Shower with 6' White Hose - Euro Trigger Sprayer This part is part of the fifth generation of Scandvik recessed showers. Also, this recessed shower has an easy-to-use Euro trigger sprayer handle. Features: White handle, white cup & cap with 6’ white nylon hose Improved UV protection and a better water seal when the cap is closed Built-in grab ring for easy deployment Mounts vertically or horizontally Mounting hardware is included Specifications: Water connection: 3/8 in. BSP-F threaded fitting Material: ABS and chrome-plated brass (push-button) Mounting Hole: 2-3/4 in. Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

White & Stainless Steel Recessed Transom Shower Handle/Hose - Vertical/Horizontal Mount - 6' Hose This recessed shower cap with composite cup mounts vertically or horizontally. Ideal as a deck or transom shower. Features: Push-Button sprayer ABS handle with an attached lanyard for easy pull-out Mounting hardware is included White with 6 ft. black nylon hose Specifications: Water Connection: 3/8 in. BSP-F threaded fitting on the hose  Mounting Hole: 2-3/4 in. diameter Shipping Weight: 4 lbs.

30° EPA Pull-Up Deck Fill Angled 1-1/2" (Water) Features: 1/4-turn pull-up cap with safety chain EPA approved for audible/visual open/close of cap Color-coded and imprinted with international standard symbols For use with carbon canister Pressure test cap available, PN 6062PC Chain Included Specifications: Type: Water Dimensions: Flange: 3" Hose: 1-1/2" Fastener: #10(3) 316 Stainless Steel

30° EPA Pull-Up Deck Fill Angled 1-1/2" (Waste) Features: 1/4-turn pull-up cap with safety chain EPA approved for audible/visual open/close of cap Color-coded and imprinted with international standard symbols For use with carbon canister Pressure test cap available, PN 6062PC Chain Included Specifications: Type: Waste Dimensions: Flange: 3" Hose: 1-1/2" Fastener: #10(3) 316 Stainless Steel

White Flat Piling Cap - 7" Prevent Damage to Your Pilings with Piling Caps White caps are made of tough, UV-resistant TPR synthetic rubber and have a long life The actual life of piling caps is not guaranteed

Perko Vented Flip Top Cap f/Fills with 1-1/2" Hose White Polymer Easily Mounts Directly on Gunnel with Removing Fill Body Includes Metallic Inserts for Gas, Diesel or Water Fills Integral Tank Vent with Flame Arrestor No Deck Plate Key or Ground Wire Required Flip Top Cap Technical Information Requires 5-1/4" Diameter Mounting Surface Screw Size: #8

Diesel Fill w/ Locking Cap for 1-1/2" Hose (0599) Chrome Plated Zinc Alloy Flange Black Plastic Body Black Plastic Cap w/ Strap Grounding Screw Included Cap Retainer and Gasket Locking Cap has a cover for the key hole Tech Info for Hose Size: 1-1/2" O.D. Flange: 3-3/8" Length of Neck: 3-1/8" Mounting Hole Dia.: 2-1/8" Screw Size: #8

Gas Fill w/ Locking Cap for 1-1/2" Hose (0599) Chrome Plated Zinc Alloy Flange Black Plastic Body Black Plastic Cap w/ Strap Grounding Screw Included Cap Retainer and Gasket Locking Cap has a cover for the key hole Tech Info for Hose Size: 1-1/2" O.D. Flange: 3-1/8" Length of Neck: 3-1/8" Mounting Hole Dia.: 2-1/8" Screw Size: #8

Replacement Cap and Chain - 6001 Gas Fill Gas Fill, 1-1/2" Hose w/Splash Shield

Description: Replacement Cap & Chain for 6123, 6124, 6125 and 6126. Material: 316 Stainless Steel

Stud Covers For applications such as engine rooms where our stainless steel studs may be visible, use these press-on white nylon caps to improve the appearance of the installation. The caps are "Matterhorn White". Install the caps before bonding up the studs. 1.25" Diameter.

Premium Replacement Distributor Cap for Mercruiser Inboard Engines with Thunderbolt IV & V HEI This distributor cap fits GM V-8 Motors with Thunderbolt IV and V HEI Ignitions. Replaces: MERCRUISER Distributor Cap 16457A4 MERCRUISER Distributor Cap 43557 MERCRUISER Distributor Cap 43557A1 MERCRUISER Distributor Cap 805759A2 MERCRUISER Distributor Cap 80579A5 MERCRUISER Distributor Cap 805759T1 MERCRUISER Distributor Cap 805759T2 MERCRUISER Distributor Cap 90746A1 PLEASURECRAFT Distributor Cap RA108009 VOLVO PENTA Distributor Cap 3858975 INDMAR Distributor Cap 556345 SIERRA Distributor Cap 18-5395 CDI ELECTRONICS Distributor Cap E64-0010 *ARCO Assurance 12-month part and labor warranty protection   This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.