Engine Room Light - Surface/Flush Mount This super-bright, vibration-resistant LED light meets the expectations of next-generation vessels, refits, or upgrades. This multi-voltage fixture can be powered by your DC battery system, an AC generator/shore power, or both. If connected to both, the PC board automatically switches to DC power when AC power is lost.  Features: Includes a trim ring for surface mount installation and stainless steel mounting hardware Meets Requirements and Standards for SAE J1171 USCG, ABYC & NMMA IP67 Flush or Surface Mount Daylight  white (6000K) 168 super-bright 2835 LEDs 12/24 VDC and/or 110/220 VAC Specifications: Lumens: 3400 (similar to 2 x T8 fluorescents) Beam Angle: 120° Watts: 42 *The "P" within the part number indicates retail packaging

A3 Downlight - Surface/Flush Mount - Stainless Steel This Scandvik A3 Surface Mounted LED Down Light is a single-color light. This A3 Surface Mount Series light features a snap-over bezel in Polished 316 stainless steel and a surface mount collar in a matching color. The A3 mounts securely overhead using two screws. Single-color lights have a two-wire (positive/negative) connection and work with a common switch (on/off).  Features: 316 stainless steel trim 6 x 0.5-watt warm white LED 242 Lumens 2.2 Watt 12 Volt   IP67 Applications: A3s are a good choice for general overhead lighting on smaller boats or as undercabinet lighting for any size vessel Other applications include hard tops, arches, walkway overhangs, shower stalls, or any area that lacks the depth to recess mount a fixture *The "P" within the part number indicates retail packaging

E360 Engine Room Light - 12V - Cool White The E-3600 is a surface-mounted engine room light. The impact-resistant PC lens allows the wires to exit straight back through the mounting surface or be routed to the side through the end cap. Featuring a total of 36 LEDs, this fixture produces 1,154 lumens, comparable to a 160-watt standard bulb. Drawing a mere 1.1 Amps at 12V, this fixture is often used in multiple quantities to eliminate any dark spots in the engine room. Features: 12 Volt, 13.2 Watt Surface Mount (hardware included) Specifications: LED Quantity: 36 (4 rows of 9 LEDs) Lumens: 1,154 Protection: IP65 LED Type: SMD5630 cool white (5,500K-6,300K) Beam Angle: 180° *The "P" within the part number indicates retail packaging

E500 Engine Room Light - 10-30V - Cool White The E-500 is a multi-voltage (12/24V), surface-mounted engine room light that offers an impact-resistant PC lens, which allows the wires to exit straight back through the mounting surface or routed to the side through the end cap. Featuring a total of 50 LEDs, this fixture produces an impressive 1,520 lumens, comparable to a 220W standard bulb. Drawing only 1.5 amps (12V), this fixture is often used in multiple quantities to eliminate any dark spots in the engine room. Features: 12/24 Volt, 18 Watt Surface Mount (hardware included) Specifications: LED Quantity: 50 (5 rows of 10 LEDs) Lumens: 1,520 Protection: IP65 LED Type: SMD5630 cool white (5,500K-6,300K) Beam Angle: 180° *The "P" within the part number indicates retail packaging

Ibiza LED Engine Room Light - Non-Dimming White - White Finish As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens. Ibiza is IP67 compliant and completely sealed. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners. Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C :-31/35 to + 131/55 F  Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: 2in (5.08cm) Width: 9in (22.86) Depth: 1in (2.54cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1600 Lumen Indoor/Outdoor Engine Room Light Excellent for lighting up small to medium size areas.  Low profile design has an IP67 Rating. Hard-anodized aluminum housing with Baked Urethane finish for extreme durability.  Glass lenses will not become brittle or turn yellow like plastic lenses.  Features: Bake urethane corrosion-resistant finish IP67 Waterproof design Easy installation Technical Specifications: Lumens - 1600  Dimensions (H x W x D) - 2.9”  x 5.1”  x  0.59”  Voltage - 10 - 40 V *Sold as an Individual

Nevis - High Intensity Engine Room Light Another high output alternative to large, boxy, unreliable fluorescents. Certified Ignition protected and small enough to mount anywhere. Wide beam angle that douses hard to light areas with a bright even light. Completely sealed, IP67 compliant and intrinsically safe. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 900mA 24V DC Amps: 450mA Correlated Color Temperature: 6500 Color Rendering Index: 70+ Rated Watts: 11 Lumens (White): 19 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 5.00" (12.7cm) Height: 2.5" (6.35cm) Depth: 0.63" (1.60cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ibiza LED Engine Room Light - Red/White Dimming - White Finish As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners. Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C :-31/35 to + 131/55 F  Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: 2in (5.08cm) Width: 9in (22.86) Depth: 1in (2.54cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ibiza LED Engine Room Light - Blue/White Dimming - White Finish As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output options, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners. Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 F  Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: 2in (5.08cm) Width: 9in (22.86) Depth: 1in (2.54cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ibiza LED Engine Room Light - Non-Dimming White - Black Finish As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens. Ibiza is IP67 compliant and completely sealed. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners. Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 F  Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: 2in (5.08cm) Width: 9in (22.86) Depth: 1in (2.54cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NevisLT LED Engine Room Light - 1000 Lumens A high output LED alternative to large, boxy, unreliable fluorescents. With more than 1,000 integrating sphere tested lumens, the NevisLT douses hard to light areas with a 180 degree spread of bright even light. Ignition protected and perfect for many applications like mechanical spaces or compartments. Developed, designed, and manufactured in Florida, USA, the NevisLT delivers exceptional reliability and class-leading performance. As with all Lumitec products, this light has been rigorously tested for shock and vibration, water ingress, impact, weatherability, electromagnetic radiation and susceptibility, and overall durability. Specifications: Voltage: 10-30V DC 12V DC Amps: 1.3A 2V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 12 Lumens (White): 1000 Width: 5" Height: 2.5" Depth: .63" IP67 Compliant Certified Ignition Protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SR-Q PRO Back Light Kit - Flush Mount Diffused - Pair - Black RIGID's lighting kit includes everything you need to install a pair of RIGID Industries back-up lights on your vehicle: Two LED lights, and extended 25' wiring harness hardware and black covers. This kit features our patented Hybrid optics system combined with a Diffused lens, to offer a powerful 60deg beam pattern for unmatched visibility. Big Power in a Small Package - The RIGID Industries SR-Q LED Light is one of the most versatile lighting products on the market today. This compact LED light can be used for virtually any lighting application - from off-road to agriculture. The SR-Q utilizes the same technology as our D-Series, but in a wide configuration, instead of square. The size and shape of the SR-Q LED Light allows it to fit almost anywhere. Its cast aluminum housing and polycarbonate lens are sealed against the elements for years of trouble-free operation. Flush Mount - This particular model is specifically designed to be recessed into a truck bumper, a utility bed, the hull of a boat, or any application where you need the light to look clean and be out of the way. Once installed, the light is only 1/4" tall, which means you can have all the benefits of our surface mount lights in an OEM quality, flush installation. Hybrid Optics - Our patented Hybrid optics system is the most powerful, most efficient LED optics system on the market. Utilizing a combination of lens and reflector, the Hybrid optics system captures the maximum amount of light emitted from the LED and projects it exactly where you want it. Diffusion Lens - Perfect for scene or area lighting, our diffusion lens was specifically engineered to project light at a 60º flood pattern. Combine that with our patented optics and you have the best LED flood light in the industry. Like our standard lens, the diffusion lens is made from optically clear, unbreakable polycarbonate plastic. Quality Construction - Our circuitry is designed in-house to be more powerful, be more efficient, and generate less heat. Our durable aluminum housings feature custom, over-sized heat sinks which keep the temperature down and allow our LED's to run cooler and brighter. All RIGID Industries LED lights receive a high quality powder coat finish, a custom-molded rubber seal, and an unbreakable, scratch resistant lens. RIGID Industries LED lights are engineered to withstand whatever you, the road, or nature can throw at them. Features:  Hybrid Optics 60° Diffused Pattern Extended Wire Harness 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered & Assembled in the USA Specifications:  Watts: 31 Amp Draw: 2.21 LED's: 4 Raw Lumens: 3168 Lux @ 10m: 13.38 Beam Distance: 36.6 m Peak Beam Intensity: 1338 cd

SR-L Series Marine Spreader Light - White Flush Mount - White Light with White Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Flush Mount - White Light with Blue Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Flush Mount - White Light with Red Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light