|
A3C Downlight Kit - Warm White with Stainless Steel, White, & Black Trim Rings
Scandvik’s A3C LED Down Lights add the convenience of spring-loaded butterfly installation clips and are offered as single or dual-color lights that can be dimmed when paired with the Tortuga PWM dimmer. A3C features a snap-over bezel in Polished 316SS, white, or Black polycarbonate.
Features:
Warm white (includes stainless steel, white, and black trim rings)
12 Volt - 2.8 Watt
12 pieces LEDs
300 Lumens
IP67
Applications:
It is a good choice for general lighting in the headliner or as under-cabinet lighting for any size vessel
Other applications include hard tops, arches, walkways, overhangs, and shower stalls
*The "P" within the part number indicates retail packaging
|
23.81 |
|
|
A3C Downlight Kit - Cool White with Stainless Steel, White, & Black Trim Rings
Scandvik’s A3C LED Down Lights add the convenience of spring-loaded butterfly installation clips and are offered as single or dual-color lights that can be dimmed when paired with the Tortuga PWM dimmer. A3C features a snap-over bezel in Polished 316SS, white, or Black polycarbonate.
Features:
Cool white (includes stainless steel, white, and black trim rings)
12 Volt - 2.8 Watt
12 pieces LEDs
300 Lumens
IP67
Applications:
It is a good choice for general lighting in the headliner or as under-cabinet lighting for any size vessel
Other applications include hard tops, arches, walkways, overhangs, and shower stalls
*The "P" within the part number indicates retail packaging
|
23.81 |
|
|
Gen 3 Indoor/Outdoor Recessed 3.5” LED Light - 2700K 85 CRI Dimmable COB LED - Warm White/Polished SS Bezel
Elegant polished stainless, brushed nickel or white trim with frosted glass make this light the perfect choice. Three screw mounting compatible with the most popular models. Digitally dimmable design means you will not need additional circuitry to adjust to just the right output. Warm White, Warm White/Red and Warm White/Blue available. Two or Three wire configurations. Simply reverse polarity to switch between colors or hi/lo.
Designed with Lunasea’s robust electronics and temperature monitoring these lights were designed for minimal interference with electronic equipment. Can be dimmed externally.
Soft 2700K warm white hi CRI COB LED light enhances the beauty of your surroundings .
Specifications:
Voltage: 10-40VDC
Power: 4.5W White / 1W Red or Blue
Output: 375 Lumen White
Color: 2700, 85 CRI
IP Rating: 65
Hole Depth: 22mm
|
64.54 |
|
|
Gen 3 Indoor/Outdoor Recessed 3.5” LED Light - 2700K 85 CRI Dimmable COB LED - Warm White/Brushed SS Bezel
Elegant polished stainless, brushed nickel or white trim with frosted glass make this light the perfect choice. Three screw mounting compatible with the most popular models. Digitally dimmable design means you will not need additional circuitry to adjust to just the right output. Warm White, Warm White/Red and Warm White/Blue available. Two or Three wire configurations. Simply reverse polarity to switch between colors or hi/lo.
Designed with Lunasea’s robust electronics and temperature monitoring these lights were designed for minimal interference with electronic equipment. Can be dimmed externally.
Soft 2700K warm white hi CRI COB LED light enhances the beauty of your surroundings .
Specifications:
Voltage: 10-40VDC
Power: 4.5W White / 1W Red or Blue
Output: 375 Lumen White
Color: 2700, 85 CRI
IP Rating: 65
Hole Depth: 22mm
|
64.54 |
|
|
“ZERO EMI” Recessed 3.5” LED Light - Warm White w/Brushed Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
67.18 |
|
|
Downlight - White Housing - Warm White
This Shadow-Caster™ large marine LED downlight is warm white and is perfect for lighting overhead areas of the interior and exterior of your boat or yacht. At 3" overall diameter, its wide-angle spread of light and all-glass reveal make this the ideal light for T-Tops, cabins, towers, and more.
Features:
LED color is warm white
120-degree viewing angle
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
All-Glass reveal provides a modern look
White finish
Durable glass lens
3-Year Warranty
Specifications:
300-lumen output (white versions)
120-degree beam angle
3-watt power draw
10-30 volts input
250mA at 12 volts, 125mA at 24 volts
6000 Kelvin cool white color temperature
3000 Kelvin warm white color temperature
3 in. (76mm) OD, 0.175 in. (4mm) mounting height
2 in. (51mm) mounting hole
IP67 waterproof design
18 in. (45cm) lead wire
Includes:
Down light
Flush mounting bracket
(3) #4 X 0.5 in. (12.7mm) SS316PH screws
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
83.99 |
|
|
"ZERO EMI” Recessed 3.5” LED Light - Polished Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
67.18 |
|
|
“ZERO EMI” Recessed 3.5” LED Light - Warm White with White Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
67.18 |
|
|
Courtesy Light - Warm White with White Rim
Attractive, energy efficient lighting for interior and exterior use. Available in nine exciting colors, Hella marine round LED courtesy lamps can be installed almost anywhere on board.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Features:
LED
12V
IP67 Completely Sealed
UV Resistant
5-Year Warranty
|
27.34 |
|
|
Adjustable Linear LED Light with Built-In Dimmer - 12" Length, 12VDC, Warm White with Switch
These sleek Light Bars are compact and put out the light. >80 CRI LED.
Features:
Only 9.5mm Thick!
Built-in Touch Switch and Easy Mounting
High CRI Light for beautiful surroundings
|
42.14 |
|
|
Adjustable Linear LED Light with Built-In Dimmer - 20" Warm White with Switch
These sleek Light Bars are compact and put out the light. >80 CRI LED.
Features:
Only 9.5mm Thick!
Built-in Touch Switch and Easy Mounting
High CRI Light for beautiful surroundings
|
48.73 |
|
|
Oberdorfer N990H-10T18Bct-Rev-W Mpu White W/Rev Switch
|
2378.84 |
|
|
Jabsco 9 Blade Impeller Kit 18786-0001-W
Neoprene material
4 5/8 in. diameter
3 1/2 in. width
1 in. shaft diameter
Double flat double D drive type
Replaces Caterpillar impeller number 9Y5427 and 7E-3022
|
198.20 |
|
|
A3 Downlight - Surface/Flush Mount - Stainless Steel
This Scandvik A3 Surface Mounted LED Down Light is a single-color light. This A3 Surface Mount Series light features a snap-over bezel in Polished 316 stainless steel and a surface mount collar in a matching color. The A3 mounts securely overhead using two screws. Single-color lights have a two-wire (positive/negative) connection and work with a common switch (on/off).
Features:
316 stainless steel trim
6 x 0.5-watt warm white LED
242 Lumens
2.2 Watt
12 Volt
IP67
Applications:
A3s are a good choice for general overhead lighting on smaller boats or as undercabinet lighting for any size vessel
Other applications include hard tops, arches, walkway overhangs, shower stalls, or any area that lacks the depth to recess mount a fixture
*The "P" within the part number indicates retail packaging
|
23.09 |
|
|
B3 Downlight Surface Mount - Cool White - SS Trim - IP67 - 12/24V
Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes.
Features:
The light color is cool white
95 Lumens
10-30 VDC
1 Watt
IP67
*The "P" within the part number indicates retail packaging
|
17.82 |
|