|
Maxillume h60 - Trunnion Mount Flood Light - White Dimming - Black Housing
Customers with high expectations, from the world's top custom yacht builders to the US Coast Guard, have relied on Lumitec's Maxillume line of flood lights for nearly a decade. Packing more than 6,000 TRUE lumens+, the Maxillume h60 boasts twice the output of previous models, mounting options and our tried and tested internal dimmer control. Each light is designed, hand assembled, and tested at our USA manufacturing facility.
Specifications:
Lumens (White): 6000
Voltage: 10-30V DC
12V DC Amps: 5A
24V DC Amps: 2.5A
Rated Watts: 60
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): No
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: N/A
Width: 8.3in (21.08cm)
Depth: 2.6in (6.6cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
423.59 |
|
|
Maxillume h60 - Trunnion Mount Flood Light - White Dimming - White
Housing
Customers with high expectations, from the world's top custom yacht builders to the US Coast Guard, have relied on Lumitec's Maxillume line of flood lights for nearly a decade. Packing more than 6,000 TRUE lumens+, the Maxillume h60 boasts twice the output of previous models, mounting options and our tried and tested internal dimmer control. Each light is designed, hand assembled, and tested at our USA manufacturing facility.
Specifications:
Lumens (White): 6000
Voltage: 10-30V DC
12V DC Amps: 5A
24V DC Amps: 2.5A
Rated Watts: 60
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): No
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: N/A
Width: 8.3in (21.08cm)
Depth: 2.6in (6.6cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
424.42 |
|
|
Maxillume h120 - Trunnion Mount Flood Light - White Housing - White Dimming
The Maxillume h120 is poised to set a standard in DC powered deck work lights. Delivering more than 12,000 TRUE lumens and housed in a heavy duty aluminum housing, this light is engineered to work hard. Designed to replace the ubiquitous GE "QF" series of quartz floodlights, they are completely water sealed and tested to withstand vibration and shock. The Maxillume h120 is the ultimate deck/work light for the roughest sea and toughest of jobs.
Specifications:
Lumens (White): 12,000
Voltage: 10-30V DC
12V DC Amps: 10A
24V DC Amps: 5A
Rated Watts: 120
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): No
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: N/A
Width: 8in (20.32cm)
Depth: 3.25in (8.25cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
644.00 |
|
|
Maxillume h120 - Trunnion Mount Flood Light - Black Housing - White Dimming
The Maxillume h120 is poised to set a standard in DC powered deck work lights. Delivering more than 12,000 TRUE lumens and housed in a heavy duty aluminum housing, this light is engineered to work hard. Designed to replace the ubiquitous GE "QF" series of quartz floodlights, they are completely water sealed and tested to withstand vibration and shock. The Maxillume h120 is the ultimate deck/work light for the roughest sea and toughest of jobs.
Specifications:
Lumens (White): 12,000
Voltage: 10-30V DC
12V DC Amps: 10A
24V DC Amps: 5A
Rated Watts: 120
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): No
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: N/A
Width: 8in (20.32cm)
Depth: 3.25in (8.25cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
634.07 |
|
|
Maxillume h120 - Flush Mount Flood Light - White Housing - White Dimming
The Maxillume h120 is poised to set a standard in DC powered deck?work lights. Delivering more than 12,000 TRUE lumens and housed in a heavy duty aluminum housing, this light is engineered to work hard. Designed to replace the ubiquitous GE "QF" series of quartz floodlights, tested to withstand vibration and shock and completely water sealed. The Maxillume h120 is the ultimate deck/work light for the roughest sea and toughest of jobs.
Specifications:
Lumens (White): 12,000
Voltage: 10-30V DC
12V DC Amps: 10A
24V DC Amps: 5A
Rated Watts: 120
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): No
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: N/A
Width: 9.6in (24.38cm)
Depth: 3.1in (7.87cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
643.38 |
|
|
Caprera3 Spreader Light - White Dimming - Black Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
121.16 |
|
|
Capri3 Spreader Light - White Dimming - Black Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
121.24 |
|
|
Caprera3 Spreader Light - White Dimming - White Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
121.16 |
|
|
Capri3 Spreader Light - White Dimming - White Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
121.24 |
|
|
Caprera2 - LED Flood Light - 2-Color White/Blue Dimming
What do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Caprera2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep© technology puts the light where you need it most, providing for up to twice the useable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USA
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 16
Lumens (White): 1000
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 4.49" (11.41cm)
Height: 1.65" (4.20cm)
Depth: 2.83" (7.20cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
147.43 |
|
|
Caprera2 - LED Flood Light - 2-Color White/Red Dimming
What do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Caprera2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep© technology puts the light where you need it most, providing for up to twice the useable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USA
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 16
Lumens (White): 610
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 4.49" (11.41cm)
Height: 1.65" (4.20cm)
Depth: 2.83" (7.20cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
147.43 |
|
|
Zambezi Mini Surface Mount Underwater Light - White - Non-Dimming
Perfect for smaller pontoons and skiffs, Zambezi Mini is small, easy to mount, easy on the wallet, yet packs a visual punch. Offers a versatile 3-screw mounting footprint only about 3” in diameter.
Specifications:
Lumens (White): 670
Voltage: 10-30V DC
12V DC Amps: 880mA
24V DC Amps: 450mA
Rated Watts: 10.5
CCT: 6500
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): No
Color Match Commitment (CM): No
Mounting Hole Diameter: 1/4"
Length: N/A
Width: N/A
Depth: 1.2 (3.04cm)
Diameter: 3in (7.6cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
129.20 |
|
|
Sea Hawk XL Dual Color LED Floodlights - Blue/White LED - Black Housing
Professional sports fisherman, commercial operators, and ocean racers all recognize the ‘non-glare' night vision preservation advantages of red lighting.
Two rows of bright white light is ideal when working, docking or landing the big one while the third row of secondary color adds versatility. Red is perfect for preserving your night vision, blue is popular when added bling or a point of difference is needed, while warm white creates added comfort when you want to relax or match the rest of your interior lighting.
The new Sea Hawk-XL continues using the latest Hi-Tech materials. A heavy duty Grilamid® lens provides exceptional impact resistance. The unique ceramic thermal polymer housing distributes heat away from internal components and avoids potential corrosion issues associated with metal housings.
Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. Sea Hawk-XL lamps are pre-wired with three core marine cable and completely sealed for reliable operation in exterior applications.
Hella Marine Sea Hawk lamps offer class-leading energy efficiency, unmatched durability and are supported with a 5-year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Housing Material: Thermally conductive polymer housing
Lens Material: Heavy duty Grilamid lens
Bracket Material: 316 Stainless Steel
Operating Voltage: 9-33V DC
Power Consumption: White LEDs <12W, Red <2W, Blue <4W
Light Output: 750 lumens
Color Temperature: 5000K (White)
Degree of Protection: IP 67 - Completely Sealed
Cable: Pre-wired with 2.5M of tinned marine cable
Approvals: CE
|
174.68 |
|
|
Zambezi X2 Surface Mount Underwater Light - White & Blue
The Zambezi product line gets a new addition, the Zambezi X2. Three times the output of the Zambezi Quattro, with more features, the Zambezi X2 outputs over 6,000 lumens and is compatible with our award-winning Poco Digital Lighting Control system, providing advanced color control via a compatible MFD or connected smart device (Poco module is required). Choose from two color output options, brilliant dual-color white/blue or dazzling full-color Spectrum output.
Specifications:
Color Output: RGBW Spectrum
Finish/Housing: Bronze
Lumens: 6000
Voltage10-30 VDC
12v DC Amps: 5A
24v DC Amps: 2.5A
Related Watts: 60W
Correlated Corrected Temperature (CCT): 6500
Color Rendering Index (CRI): 70+
Op. Temp F/C: F/C-31/35 to + 131/55
Diameter: 4 in (10.16cm)
Depth: 1.6 in (4.06cm
IP Rating: 68
PLI Enabled: Yes
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): No
Color Match Commitment (CM): No
CE Certified: Yes
UL Certified: No
|
329.36 |
|
|
Zambezi Quattro Surface Mount Underwater Light - White/Blue
Leveraging the SeaBlaze Quattro, Zambezi Quattro is the perfect match for larger pontoon boats, aluminum skiffs, and floating docks. Blue/white dual color delivers more than 2,000 lumens and stunning color. Completely sealed with no external drivers. Self-isolating from metallic mounting surfaces to prevent galvanic corrosion. Perfect for typical transducer/accessory brackets.
Specifications:
Lumens (White): 2000+
Voltage: 10-30V DC
12V DC Amps: 2.1A
24V DC Amps: 1.1A
Rated Watts: 25
CCT: 6500
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): No
Color Match Commitment (CM): No
Mounting Hole Diameter: 0.5"
Length: N/A
Width: N/A
Depth: 1.6in (4.06cm)
Diameter: 4in (10.16cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
242.26 |
|