Contour Series Navigation/Docking Combination Light - Starboard Green Innovation – plain and simple. Lumitec’s engineers have combined a bright, sharp 1,000-lumen dock light with a U.S. Coast Guard-approved 2nm navigation light. Easy to install, great looking, and all the reliability you’ve come to expect from Lumitec. Specifications: Output: Starboard Green Visibility: USCG2NM Flood Lumens: 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A (flood) 24V DC Amps: 600mA (flood) Conforms to: ABYC A1

Contour Series Navigation/Docking Combination Light - Port Red Innovation – plain and simple. Lumitec’s engineers have combined a bright, sharp 1,000-lumen dock light with a U.S. Coast Guard-approved 2nm navigation light. Easy to install, great looking, and all the reliability you’ve come to expect from Lumitec. Specifications: Output: Port Red Visibility: USCG2NM Flood Lumens: 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A (flood) 24V DC Amps: 600mA (flood) Conforms to: ABYC A1

Contour Series Drop-In Navigation Light - Starboard Green Contour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern. Features: Output: Starboard Green Visibility: USCG2NM Voltage: 10-30V DC 12vDC Amps: 18-26mA 24vDC Amps: 12-15mA Conforms to: ABYC A16

Surface Mount Navigation Light - Classic Aluminum - Starboard Green For retrofit and new applications where a molded-in pocket is not possible or practical, Lumitec offers our surface mount navigation lights. Clean styling and unmatched reliability. Choose classic aluminum half-round design for mounting to vertical surfaces, or the more contemporary composite version for horizontal mounting surfaces. Features: Output: Starboard Green Visibility: USCG2NM Voltage: 10-30V DC 12V DC Amps: 21-26mA 24V DC Amps: 13-15mA Conforms to: ABYC A16

Contour Series Drop-In Navigation Light - Red Port Contour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern. Features: Output: Port Red Visibility: USCG2NM Voltage: 10-30V DC 12vDC Amps: 18-26mA 24V DC Amps: 12-15mA Conforms to: ABYC A16

Contour Series Drop-In Navigation Light - Stern White Contour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern. Features: Output: Stern White  Visibility: USCG2NM Voltage: 10-30V DC 12vDC Amps: 18-26mA 24vDC Amps: 12-15mA Conforms to: ABYC A16

Contour Series Inset Navigation Light - Starboard Green Contour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern. Features: Output: Starboard Green  Visibility: USCG2NM Voltage: 10-30V DC 12V DC Amps: 18-26mA 24V DC Amps: 12-15mA Conforms to: ABYC A16

LightArmor Vertical Surface Mount Navigation Light - Starboard (green) - Stainless Steel - 2NM Technology that lights the way. Premium, LightArmor LED Navigation Lights meet today's global regulatory compliance. Introducing LightArmor LED Navigation Lights, a new line of streamlined surface mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.* LED Light Engine Cool to the touch Long lasting - 50,000+ hours Color indicated cores for ease of installation Be Safe, Be Seen Sharper cut-off angles and vibrant starboard and port colors for better visibility 2 NM U.S.C.G. Certified Corrosion Resistant Water-Resistant (IP Rating 67) Features tell-tale indicators for ease of use Smaller footprint with refined styling WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Contour Series Inset Navigation Light - Port Red Contour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern. Features: Output: Port Red Visibility: USCG2NM Voltage: 10-30V DC 12vDC Amps: 18-26mA 24vDC Amps: 12-15mA Conforms to: ABYC A16

Contour Series Inset Navigation Light - Stern White Contour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern. Features: Output: Stern White Visibility: USCG2NM Voltage: 10-30V DC 12V DC Amps: 18-26mA 24V DC Amps: 12-15mA Conforms to: ABYC A16

Discover Series D3 Underwater Light - Midnight Blue The Discover Series D3 underwater LED light from OceanLED, is ideal for boats that want to discover the many benefits of underwater lighting. Superior Protection, Total Peace of Mind The Discover D3 is rated at IP69k, the highest achievable rating of protection against water ingress. IP69k goes one step further than the industry standard IP68, giving you additional protection and peace of mind. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern.  Compact Design The D3’s compact dimensions make it ideal for tight-fitting areas or smaller boats. Advanced Signature Optics - Wide Surface Beam The Discover D3 benefits from OceanLED’s signature optics (90° x 20°), producing an unrivaled optimal lighting effect. Advanced Signature Optics - Narrow side Beam The OceanLED signature optics produce a narrow side beam, that has a minimal light loss, focusing the beam where you need it and penetrating further through the water. Control your lights   Control your Discover D3 lights via the 3rd party switch or push button of your choice. Consult the installation manual for more information. Features: 700 Fixture lumens 90° Top Beam  Elliptical Beam Shape  20° Side Beam  IP69k Protection Compact size for tight spaces and smaller boats Rear Submersion Protection Can be used above water

Discover Series D3 Underwater Light - Ultra White The Discover Series D3 underwater LED light from OceanLED, is ideal for boats that want to discover the many benefits of underwater lighting. Superior Protection, Total Peace of Mind The Discover D3 is rated at IP69k, the highest achievable rating of protection against water ingress. IP69k goes one step further than the industry standard IP68, giving you additional protection and peace of mind. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern.  Compact Design The D3’s compact dimensions make it ideal for tight-fitting areas or smaller boats. Advanced Signature Optics - Wide Surface Beam The Discover D3 benefits from OceanLED’s signature optics (90° x 20°), producing an unrivaled optimal lighting effect. Advanced Signature Optics - Narrow side Beam The OceanLED signature optics produce a narrow side beam, that has a minimal light loss, focusing the beam where you need it and penetrating further through the water. Control your lights   Control your Discover D3 lights via the 3rd party switch or push button of your choice. Consult the installation manual for more information. Features: 700 Fixture lumens 90° Top Beam  Elliptical Beam Shape  20° Side Beam  IP69k Protection Compact size for tight spaces and smaller boats Rear Submersion Protection Can be used above water

Many boaters find exploring underwater an adventure into a whole new world. Whether you are on a night dive or set to explore murky waters, choose the best lighting for safety. For a night dive, consider the number of lumens and the angle of a dive light. In an article by www.scubadiving.com,any light with an average beam angle between 12 degrees to 75 degrees and a lumen output of 200 or greater should work fine for any recreational diving. The beam should be far wider than most torches can produce to prevent a bright spot from appearing. A 90-degree beam should be sufficient for most wide-angle video cameras.   For many safety reasons, having lights underwater on a boat is a must. The lights cast a glow with a lantern-type beam to make your location more visible. Many captains mount lights under the swim step to improve safety when stepping on or off a boat.   Nighttime fishing has become extremely popular. An easy and effective way to attract fish at night is with appropriate lighting. The fish are not attracted to the light itself — they are attracted to the zooplankton that gathers around it.   Color matters when it comes to underwater lighting. The most effective colors are Green light and White light to attract fish to boats, docks, and piers. These colors are brighter and will attract fish from a greater distance. Blue light is less bright and is typically used more for ambient lighting.    In a future article, we will cover deck lights. For safety regarding boating at night, an on-deck spotlight is an essential piece of equipment. Many skippers have been saved from an impending disaster because their searchlight beam lit up an unlit dock, break-wall, or buoy. The spotlight also helps you spot a person or object that has fallen into the water. It can aid in safety when needed to signal other boats.   When shopping for a spotlight, decide if you want one permanently installed or a handheld that can charge from a cigarette lighter receptacle. You can also purchase a battery-operated handheld light.   Golight Stryker Searchlight 12V w/Wired Dash Control w/20' Wire Harness – White One of the preferred searchlights among skippers is the Golight Stryker Searchlight. It comes with a 20' wire harness and has a wireless dash-mount remote option. For broad sweeps with the beam, the searchlight has a 370x Rotation x 135-degree Tilt, with 200,000 Candela Beam Intensity. It is both UV Ray and Saltwater Resistant.   ACR RCL-300 Remote Controlled Searchlight - 12V/24V The top-of-the-line ACR RCL-300 Remote Controlled Searchlight – 12V/24V has feature upon feature with its versatility and ease with touch control. It includes fingertip remote control Point Pad™; up to three remote Point Pad™ units may be installed on the system; surface/flush mount options included. The exclusive XRCiZ™ feature rotates and moves the light assembly every 30 days from activation to keep all bearing surfaces free of corrosion and all electrical contacts functional.   Underwater Lighting Among the more popular LED hull-mounted lights is the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting - Midnight Blue. XFM models, or Xchangeable Flush Mounts, are exchangeable without hauling should service be needed. The light can be retrofitted into most existing underwater lighting hole cut-outs, yielding immediate benefits of no startup power surge, low heat, minimal maintenance, and improved light output. It offers 7,000-fixture lumen brightness with the 2010XFM HD Gen2 model.   For additional information and pricing on the lighting listed here, go to https://www.clrmarine.com/462m4/lighting.html.     Fair Winds, Smooth Sailing. ____________________________________________________________________________________________________ To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.     Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com  

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686

  D-SS Driving, Spot & Flood LED Lights   One of Rigid's most versatile, compact lighting solutions just got better with the D-SS, Dually Side Shooter LED cube. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications.   The D-SS cube incorporates the same powerful optics and legendary LED technology as Rigid's popular D-Series lights but with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with Rigid's advanced Flood, Spot, or Driving optics, so there's a D-SS lighting solution for nearly any application.   The D-SS LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only Rigid provides a broad, powerful lighting solution in such a compact package.       Ignite Surface Mount Diffused, Flood & Spot LED Lights   The Rigid Ignite™ is the smallest, most versatile light in Rigid Industries' product line! Measuring approximately 1.4” x 1.4” x 2”, this flexible light packs 1000 raw lumens using Spot, Flood or Diffused beam patterns; perfect for any application where short range light output is needed.   The Ignite also utilizes a Go-Pro® style mounting bracket which mates with an array of off the shelf Go-Pro mounts. Due to the wide range of mounting options, the Ignite's applications are almost limitless. The compact and lightweight housing makes the Ignite a great choice for auxiliary lighting on cars and trucks, motorcycles, UTVs, and even marine applications. Low current draw (less than 1 amp) and voltage requirements (6-28 volts) makes the Ignite adaptable to any application.   *Single light kits include one Ignite, mounting brackets, and related hardware. GoPro Mount Not Included.     Specials   Closeouts    Remanufactured    Rebates