|
MP Pumps 21339 Flomax 8 Self Priming Centrifugal Pump
FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.
A FLOMAX PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.
The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
Model: Flomax 8
Part # MP 21339
Configuration: Pedestal Mount
Port Size: 2 in. NPT
Flow-Rate: 150 GPM
Head Feet: 100
Features
Material of Construction: Cast Iron
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
Applications
Agricultural
Industrial
Marine
|
1033.20 |
|
|
MP Pumps Flomax 5 Self Priming Centrifugal Pump
FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.
A FLOMAX PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.
The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
Model: Flomax 5 Part # MP 21302
Port Size: 1 1/2 in. NPT
Flow-Rate: 145 GPM
Head Feet: 100
Features
Material of Construction: Cast Iron
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
Applications
Agricultural
Industrial
Marine
OEM
|
801.00 |
|
|
MP Pumps 21372 Flomax 15 Self Priming Centrifugal Pump for Water & Fertilizer
FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.
A FLOMAX PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.
The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
Model: Flomax 15 Part# 21372
Configuration: Pumpak
PORTS: 3 in.
Flow-Rate: 320 GPM
Head Feet: 145
Features
Material of Construction: Cast Iron
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners Up to a 25' suction lift
Applications
Agricultural
Industrial
Marine
|
1499.40 |
|
|
Sherwood GCBN33V BRONZE GEAR PUMP
CARBONATOR-MOUNT BRONZE PUMPS (INTERMITTENT DUTY) – Excellent for water-based fluids. Feature 303 stainless steel shafts, carbon graphite bushings, and Buna-N mechanical carbon/ceramic faced seal with a temperature range of -20° to 210° F.
Standard pressure relief valves can be ported internally or externally. Wet-end parts are constructed from bronze, brass, stainless steel (302, 303 and/or 18-8), graphite, carbon, and Buna-N.
For use with non-particulate and non-abrasive fluids compatible with pump wet-end construction component materials.
• Flows to 4.4 GPM.
• Max. RPM: 1725.
• Max. PSI: 100.
• Standard motors are Dual hertz (50/60), Dual voltage (115/230), RoHS compliant, UL, CSA & CE.
• Maximum viscosity of 500 SSU at 1725 RPM (max. input torque of 45 in.-lbs.).
• Pumps can operate bi-directionally (reversible). In reverse operation, the pressure relief valve will not function.
• Temperature ranges from -20° to 280° F.
• Maximum working pressure: 150 PSI.
|
1739.05 |
|
|
MP Pumps 21327 Flomax 8 Self Priming Centrifugal Pump
FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.
A FLOMAX PumPAK® is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.
The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
Model: Flomax 8 part # MP 21327
Port Size: 2 in NPT
Flow-Rate: 150 GPM
Head Feet: 100
Features
Material of Construction: Cast Iron
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
Applications
Agricultural
Industrial
Marine
|
840.60 |
|
|
MP Pumps 21380 Flomax 15 NPT Self Priming Centrifugal Pump
Pedestal Drive Bronze, 6.0" Impeller, 3" x 3"
MP Pumps Flomax 15, 3" NPT Flomax self priming centrifugal pumps. Up to 300 GPM, up to 125' head (54 PSI), 3450 RPM. Available in all bronze construction.
Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.
Specifications
Rated Capacity 300 GPM Maximum Discharge Pressure: 125 feet (54 PSI)
Suction & Discharge Connections: 3" X 3" FNPT
Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve, 304 stainless steel stub shaft; viton mechanical seal.
This item is 'build to order'.
|
6366.98 |
|
|
MP Pump 28399 Flomax 8 Pump SS: Ped 5.0
MP Pumps Flomax 8, 2" 140 GPM Stainless Steel Pedestal Mount Self Priming Pump 28399
MP Pumps Flomax 8, 2" NPT self priming centrifugal pumps # 28399. Up to 140 GPM, up to 40 PSI (92'), 3450 RPM, all stainless steel construction. Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.
Specifications
Rated Capacity 140 GPM Maximum Discharge Head: 92 feet (40 PSI) Suction & Discharge Connections: 2" X 2" FNPT Construction: Stainless Steel housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss, weight 49 lbs.; 304 stainless steel stub shaft; viton mechanical seal. Motor: None
Pump Capacity - MP Pumps Flomax 8 Self Priming Pumps At 0 Suction Lift, 3600 RPM
HPImp.Capacity At Total Dynamic Head In FeetShut
Off
20'30'40'50'60'70'80'90'
Gallons Per Minute (GPM)
1-1/24.10"105856020----54'
24.62"12711090704515--74'
35.0"1501401201008060401596'
|
2854.01 |
|
|
MP Pumps 21371 Flomax 15 NPT Self Priming Centrifugal Pump
Pak Bronze, 6.0" Impeller with Base and Fasteners, 3" x 3"
FLOMAX 15 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.
A FLOMAX 15 PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 184TC and 215C frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller.
The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Wash-down Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
This item is 'build to order'.
|
6222.08 |
|
|
MP Pumps 21353 Flomax 10 Self Priming Centrifugal Pump
Bronze, Pedestal, 6.0" Impeller, 2" x 2"
FLOMAX 10 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line. A FLOMAX 10 PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 182TC and 184TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Wash-down Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
|
5804.63 |
|
|
MP Pumps 21311 Flomax 5, 1-1/2" pedestal mount self priming pump
MP Pumps Flomax 5, rated at 100 GPM in bronze construction with viton mechanical seal.
Specifications
Rated Capacity 100 GPM Maximum
Discharge Pressure: 40 PSI
Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT
Construction: Bronze housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8"; viton mechanical seal.
|
2960.96 |
|
|
FLOMAX®8 by MP Pump part 26079
2" x 2" Self Priming Centrifugal Pump
FLOMAX® 8 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump’s built in flapper valve will maintain a full column of liquid in the suction line.
A FLOMAX® 8 PumPAK® is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive.
Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wearplate, and a semi-open dynamically balanced impeller.
The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
|
821.70 |
|
|
MP Pump 24832 Cast Iron Pump
MP Pumps 24832, FLOMAX 10 Self Priming Centrifugal Pump End Only, 2" x 2" NPT Ports, Capacity up to 225 GPM, Total Head up to 145 feet. FM10PPK C: CCMTR 1.13 6.0
SUCTION AND DISCHARGE3" x 3" NPT
APPLICATIONAgricultural, Industrial, Marine, OEM
MATERIALS OF CONSTRUCTION316 stainless steel, Bronze, Cast iron
FLOWUp to 320 GPM
HEAD FEETUp to 145'
IMPELLER6.0" max. diameter, semi-open
MOTORUp to 7.5 HP
|
1397.70 |
|
|
MP Pumps 21301 Flomax 5 Pump Pak Bronze 3/4 Eng Mnt, 1-1/2" x 1-1/2"
FLOMAX 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line. A FLOMAX PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller.
The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Wash-down Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and more.
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
|
2747.93 |
|
|
MP Pump 21381 FLOMAX 15 Self Priming Centrifugal Pump
MP Pumps Flomax 15 Self Priming Centrifugal Pumps for Water & Fertilizer w/ Pedestal Mount
FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.
A FLOMAX Pump is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.
The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
Model: Flomax 15
Part #: MP21381
Size: 3 in. NPT
Flow-Rate: 320 GPM
Head Feet: 145
Features
Material of Construction: Cast Iron
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
Applications
Agricultural
Industrial
Marine
OEM
|
1762.20 |
|
|
MP Pumps 21363 FM10 C/I PED This item is 'build to order'.
MP Pumps Flomax 10, 2" NPT Flomax self priming centrifugal pumps. Up to 210 GPM, up to 130' head (56 PSI), 3450 RPM. Available in cast iron construction. Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.
Specifications
Rated Capacity 210 GPM Maximum Discharge Pressure: 130 feet (56 PSI) Suction & Discharge Connections: 2" X 2" FNPT Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss; 304 stainless steel stub shaft; viton mechanical seal.
|
1722.60 |
|