Jabsco Polypropylene 23650-0500 Drum Pump 20" Pump Body: Polypropylene Port Size: 3/4" Dia. Slip-on Hose Discharge Impeller: Axial Flow, Polypropylene Shaft Seal: Viton Lip Seal Shaft: Hastelloy C   This Drum Pump is specifically designed to be used in laboratory size containers where fluids are to be transferred to smaller containers for handling.

Jabsco 16440-Kit Drum Pump Air Motor Kit  

Jabsco 12290-0001-7273 115V Rubber Impeller Pump 115V RUBBER IMPELLER PUMP Model JA 12290-0001-7273   Features Pump Body: Phenolic Plastic Impeller: Neoprene  Port Size: Ports are 5/8 Inch OD for Hose Connections Motor Specs : 1/6 Horsepower, 1750 RPM RPM, 115 Volts, Open Drip Proof Handles hard and soft solids without clogging.   Non pulsating flow    

Jabsco 31800-0092 Series Industrial Diaphragm Pump Pump Body: Glass Filled Polypropylene, Four Piston, Diaphragm Pump Port Size: Snap-in 1/2" (13 mm) Hose Barb and 1/2" (13 mm) Straight Pipe Thread Flow: 4 GPM/15 LPM Pressure: Continuous, Maximum 40 psi (2.8 bar) at Ambient of 130° F (54.4° C). 31800 Series: No Switch 31801 Series: Cut-In 20 PSI, Cut-Out 40 PSI. Elastomers: Diaphragm: Santoprene Valves: Viton Motor: Permanent Magnet with Thermal Overload Protection. Continuous duty at 15 psi (1 bar) and 70°F (21°C) ambient temperature.     APPLICATIONS Self-Priming to 10 ft. (3 m) (wet) 5 ft. (1.5m) (dry). Runs Dry Without Damage. Smooth Flow. Snap-in Ports. Temperature: Liquid temperature range is 45°F to 130°F (7°C to 54°C). Viscosity: 250 cP maximum.   CONSTRUCTION – Water supply pump to the spray bars of road rollers and other compaction equipment, street sweepers, and truck mounted dust control systems. Superior equipment washdown results can be enjoyed with the 30801-Series pumps.   AGRICULTURAL – Supply pump for herbicide and pesticide sprayers and sprayboom equipment.   INDUSTRIAL – Fluid transfer applications for mild acids and bases. Chemical feed pump. Washing fluid supply pump in parts washing systems. Machine coolant pump. Concrete saw lubricant supply pump. Recirculating pump in filtering systems.   NOTE: Viton equipped models are not suitable for potable water applications.   Jabsco Industrial Diaphragm Pump 12Volt No Switch  

Jabsco Pump with 115Vac Motor FEATURES Pump Body: Bronze Port Size: 3/4" (19mm) Garden Hose External Thread and 1/2" NPT Internal Flow: 9.6 GPM at 10ft Pressure: 17.3 PSI Max Impeller: Nitrile or Neoprene Shaft Seal: Lip Type Shaft: Stainless Steel Sleeve over Motor Shaft Motor: 1/3 HP, 115V AC 60 HZ, 1725 RPM, Single Phase, Capacitor Type, Open Drip Proof or Totally Enclosed Fan Cooled. Handle and 8' Cord with 3 prong grounded plug on ODP motor only   APPLICATIONS The 11810-Series pumps are robust, portable self-priming Utility Pumps with a substantial flow rate.   MARINE: Bait tank circulation, transfer oil, wash down, and utility dock pumps.   INDUSTRIAL: Circulate coolant on machine tools, industrial filling systems, utility shop pump, transfer gum arabic, transfer distilled water, recharge water softeners, ice water recirculation, hydrostatic pressure testing, vacuum pump, and aspirating pump.   FOOD, BEVERAGE, & DAIRY: Circulate cooling water, defrost refrigeration coils, fill drums, wash down equipment and floors, and utility pump.   HOME: Fill and empty tubs and pools, empty basements, cesspools, water systems, water lawns and gardens, remove water from low areas, and recharge water softeners.   PLUMBING: Empty clogged sumps, drains, sinks and tubs, and pump out water closets.   FARM: Fill tractor tires, fill water tanks, pump out silo pits, liquid manures, transfer oil, and flush and clean animal pens.   CONTRACTORS: Remove water from excavations, supply water to mortar boxes and cement mixing, and washdown equipment.

Jabsco 31801-0092 Series Industrial Diaphragm Pump Pump Body: Glass Filled Polypropylene, Four Piston, Diaphragm Pump Port Size: Snap-in 1/2" (13 mm) Hose Barb and 1/2" (13 mm) Straight Pipe Thread Flow: 4 GPM/15 LPM Pressure: Continuous, Maximum 40 psi (2.8 bar) at Ambient of 130° F (54.4° C). 31800 Series: No Switch 31801 Series: Cut-In 20 PSI, Cut-Out 40 PSI. Elastomers: Diaphragm: Santoprene Valves: Viton Motor: Permanent Magnet with Thermal Overload Protection. Continuous duty at 15 psi (1 bar) and 70°F (21°C) ambient temperature.     APPLICATIONS Self-Priming to 10 ft. (3 m) (wet) 5 ft. (1.5m) (dry). Runs Dry Without Damage. Smooth Flow. Snap-in Ports. Temperature: Liquid temperature range is 45°F to 130°F (7°C to 54°C). Viscosity: 250 cP maximum.   CONSTRUCTION – Water supply pump to the spray bars of road rollers and other compaction equipment, street sweepers, and truck mounted dust control systems. Superior equipment washdown results can be enjoyed with the 30801-Series pumps.   AGRICULTURAL – Supply pump for herbicide and pesticide sprayers and sprayboom equipment.   INDUSTRIAL – Fluid transfer applications for mild acids and bases. Chemical feed pump. Washing fluid supply pump in parts washing systems. Machine coolant pump. Concrete saw lubricant supply pump. Recirculating pump in filtering systems.   NOTE: Viton equipped models are not suitable for potable water applications.        

Jabsco 31820-0494 Series Industrial Diaphragm Pump Pump Body: Glass Filled Polypropylene, Four Piston, Diaphragm Pump Port Size: Snap-in 1/2" (13 mm) Hose Barb and 1/2" (13 mm) Straight Pipe Thread Flow: 3 GPM/12 LPM Pressure: Continuous, Maximum 40 psi (2.8 bar) at Ambient of 130° F (54.4° C). No Switch. Elastomers: Santoprene Diaphragm, Valves of Viton Motor: Commercial Duty, Permanent Magnet with Thermal Overload Protection. Corrosion Protected. Conforms to Electromagnetic Compatibility 89/336/EEC and Machinery Directive 89/392/EEC, EN50081-1     APPLICATIONS Self-Priming to 10 ft. (3 m). Runs Dry Without Damage. Smooth Flow. Snap-in Ports.   CONSTRUCTION: Water supply pump to the spray bars of road rollers and other compaction equipment, street sweepers, and truck mounted dust control systems.   AGRICULTURAL: Supply pump for herbicide and pesticide spraying equipment.   INDUSTRIAL: Fluid transfer applications for mild acids and bases. Chemical feed pump. Washing fluid supply pump in parts washing systems. Machine coolant pump. Concrete saw lubricant supply pump. Recirculating pump in filtering systems.   Jabsco Industrial Diaphragm Pump 24V 3GPM No Switch  

Jabsco Phenolic Pump W/Ss Shaft &Amp; Viton   FEATURES Pump Body: Phenolic Type Plastic Port Size: 5/8" ID Hose Slip On Flow: 5.8 GPM at 10 feet of Head, 1750 RPM Pressure: 13 PSI Max Impeller: Neoprene, Nitrile or Viton Shaft Seal: Lip Type Shaft: Stainless Steel or Hastelloy Bearing: Filled Teflon - Replaceable     APPLICATIONS / CHARACTERISTICS INDUSTRIAL: Designed for: Carboy and drum transfer, hazardous chemical transfer and recirculation, recirculation of descaling compounds through refrigeration and condenser coils, printed circuit etching, general laboratory transfer, photographic fixes and developers, barium transfer, transfer of ammonia on blueprint machines, silver recovery, demineralized and distilled water. The only metallic parts in the 3010 series are the shaft and the drive pin   Jabsco Phenolic Pump W/SS Shaft & Viton Impeller

Jabsco 12210-0003 Pump 115V Motor Pump Body: Bronze Port Size: 3/8" NPT Internal Pipe Thread and Adaptors for 3/4" garden hose thread Flow: 3.4 GPM at 10ft Pressure: 17.4 PSI Max Impeller: Neoprene or Nitrile Shaft Seal: Lip Type Motor: 115 Volt AC Intermittent duty with Replaceable Brushes, Stainless Steel Shaft, 6' cord, three prong grounding plug   APPLICATIONS The 12210-Series Pumps are the most compact self-priming flexible impeller 115 Volt AC Utility Pumps Jabsco offers.   INDUSTRIAL: Transferring liquids. Velocity-mixing. Pumping coolants. Pumping waste water to sewer. Cellar, yard and sump drainage. Cooling Heliarc welding equipment.   MARINE: Washing down decks and docks. Water for ship's service supply. Pumping out crank-case oil.   FARMING: Pumping water for stock, poultry houses, farmhouse. Pumping water from wells and cisterns. Pumping liquid ballast into tractor tires. Pumping water from flooded basements.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, etc. Draining water heaters and water closets. Draining laundry tubs below sewer level. Removing water trapped between walls, draining inaccessible places when pipes break or leak. Draining fishing ponds and garden pools. Removing sludge, lye water and other caustics from stopped up drains and sinks.   Jabsco Flexible Impeller Utility Pump 115V 3.4GPM Nitrile Impeller  

Jabsco 92600-0500 Ball Brg  

Jabsco 98022-0500 12V Coil  

Jabsco 11870-0045 Electric Pump 1 1/4 12V Clutch FEATURES Pump Body: Bronze Port Size: 11870-Series, 1-1/4" NPT Internal Electric: 12V Self-priming from 7.8 feet dry Pulley: Single B groove or Double A groove Impeller: Nitrile Shaft Seal: Mechanical Carbon-Ceramic, Face Type Shaft: Stainless Steel Bearings: Shielded Ball Bearings    APPLICATIONS  This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation. MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump   INDUSTRIAL: Circulating and transferring, Velocitymixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.   FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.   Jabsco Electric Clutch Pump 12V, 1-1/4" NPT Ports, Single "B" Groove Pulley  

Jabsco 1673-1003 Pump 1/2" Ped Mt FEATURES Pump Body: Bronze Port Size: 1/2" NPT Impeller: Nitrile Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.) Impeller: Neoprene or Nitrile (Oil Resistant) Shaft Seal: Lip Seal or Mechanical seal, Buna N Shaft: Stainless Steel Bearings: Sealed Ball Bearings    APPLICATIONS  This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.   MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.   INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,   Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.   FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools   Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Nitrile Impeller  

Jabsco 1673-2001 Pump 1/2" Npt Neo W/Mech Sl FEATURES Pump Body: Bronze Port Size: 1/2" NPT Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.) Impeller: Neoprene Shaft Seal: Mechanical seal Shaft: Stainless Steel Bearings: Sealed Ball Bearings    APPLICATIONS This pump offers all the benefits of a flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports. MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.   INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.   FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.     Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Mechanical Seal Neoprene Impeller  

Jabsco 1673-1001 Flexible Impeller Pedestal Pump Pump Body: Bronze Port Size: 1/2" NPT Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.) Impeller: Neoprene or Nitrile (Oil Resistant) Shaft Seal: Lip Seal or Mechanical seal, Buna N Shaft: Stainless Steel Bearings: Sealed Ball Bearings    APPLICATIONS  This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports. MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.   INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.   FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Neoprene Impeller,  Kohler 15HP