1050 Depthmaster Masterpack (23") Same great features as the 1050 Depthmaster but rigged up with a portable 1021 Portable Clamp-on Bracket, making this downrigger the perfect non-permanent compact option for your boat. PRODUCT OVERVIEW:  Spray protected positive-drive depth counter 200 ft. of 150 lb. Test, Stainless Steel Downrigger Cable 1 ft. per turn of the spool Boom mounted adjustable 355 Rodmaster II Rod Holder Includes 1021 Portable Clamp-on Bracket Marine grade stainless steel boom Clutch brake with the largest braking surface in the industry – In the event of a bottom hang-up, it will pay out to avoid loosing gear Includes Power Grip Plus Line Release Fully assembled and factory tested with complete saltwater protection Downrigger Boom Length: 23″ stainless steel boom Downrigger Boom Diameter: 3/4″ Rod Holder Interior Diameter: 1.85″ WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1050 Depthmaster Downrigger (23") The all time Scotty leader in performance and sales. Compact, versatile and reliable, the perfect introductory downrigger. One foot per turn spool operates easily with either hand from a sitting position in the boat. PRODUCT OVERVIEW:  Spray protected positive-drive depth counter 200 ft. of 150 lb. Test, Stainless Steel Downrigger Cable 1 ft. per turn of the spool Boom mounted adjustable 355 Rodmaster II Rod Holder Includes 1010 Quick-Slide Deck Mounting Bracket Marine grade stainless steel boom Clutch brake with the largest braking surface in the industry – In the event of a bottom hang-up, it will pay out to avoid loosing gear Includes Power Grip Plus Line Release Fully assembled and factory tested with complete saltwater protection Downrigger Boom Length: 23″ stainless steel boom Downrigger Boom Diameter: 3/4″ Rod Holder Interior Diameter: 1.85″ WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Coaming/Gunnel Clamp Mount Position your rod holder or Scotty accessory virtually anywhere on the lip of your kayak's coaming. Built tough from rugged engineering grade nylon, the 433 revolutionizes the way your can fish from your sit-in kayak. The attached Gear-Head Mount allows you to quickly change rod holder positions with a simple twist. Easily fasten the 433, drop and lock your favorite Scotty Rod Holder or accessory and start fishing! A non-permanent solution for mounting fishing gear to your watercraft and getting you out there!

No. 1071 Clamp Mount Comes with fully portable anodized aluminum clamp for mounting on the gunnel or transom (2" opening). Great for aluminum boats and canoes WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Square Post Clamp Mount for Posts Up to 2.5" Wide The RAM-101U-247-25 consists of a double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 2.5" clamp base. The clamp base will wrap around a maximum width of 2.5" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.  Features: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.55 lbs.

RAM® Square Post Clamp Mount for Posts Up To 3" Wide The RAM-101U-247-3 consists of a double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 3" clamp base. The clamp base will wrap around a maximum width of 3" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.8 lbs.

RAM® Square Post Clamp Mount for Posts Up To 2.5" Wide The RAM-101U-247-25 consists of a double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 2.5" clamp base. The clamp base will wrap around a maximum width of 2.5" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.55 lbs.

Anchor Lock w/ Flush Deck Mount (P/N 244) Anchor release system for small boats in still-water fishing situations.  Features: Easy lock and release action allows anchor line adjustment with only one hand.  For use with rope up to 1/2' diameter.  Tough construction and roller bearing for smooth, quiet operation. Includes No. 244 Flush Mount Bracket Mount Dimensions: 4" x 2" x 2" Bolting Dimensions: 1-15/16" 3-3/16" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM Yoke Clamp Mount w/Double Socket Arm & Diamond Base Adapter Part #: RAM-B-121-238U Consists of a double socket arm, universal diamond base and yoke clamp base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. The clamp base will accommodate rails in diameter from 0.625" to 1.25". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Yoke Clamp Mount w/Diamond Base - Long Part #: RAM-B-121-C-238U Universal glare shield/yoke mount with LONG double socket arm and universal diamond base adapter, is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and light weight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another "must have" for any pilot. The RAM-B-121-C-238U fits rails or edge lips from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball giving you the ultimate double ball base. Clamp Dimensions: Fits rails or edge lips from 0.625" to a maximum of 1.25" Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. The rail does not need to be perfectly round to mount this base.

Tough-Claw Small Clamp Mount w/Double Socket Arm - 1" Ball MODULAR DESIGN The rubber ball and socket design offers a secure hold with infinite options and vibration dampening for demanding environments. BEST WARRANTY The philosophy is simple—build the best products available. And so our warranty is simple too. If we built it, we guarantee it. We are confident in the quality of our products, and with our warranty, you can be too. MADE IN AMERICA The all-American staff designs, manufactures, assembles, and sells our products right here, and ships them straight to you. Clamp Range: .625" - 1.14" diameter Socket to Socket Length: 1.75" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs/Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum/High strength composite

ShadeFin Mini Clamp Mount ShadeFin Mini's highly portable clamp mount quickly connects to any square rail, table, deck rail, or lip up to 2.25" thick and is a great solution for pontoon boat rails. Features and Benefits: Easily installed to most railing sizes Includes two screws that can be securely tightened  Constructed out of aluminum-grade grade-6061 alloys with two threaded stainless steel Type-304 clamping rods includes an injection-molded nylon cap and knobs 3-year limited warranty Specifications: Finish: Powder coated, misty silver

RAM® Tough-Claw™ Small Clamp Mount with Diamond Plate The RAM-B-400-238U consists of the small RAM® Tough-Claw™ base, marine-grade aluminum double socket arm, and diamond base adapter. The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, and odd-shaped rails and bars. The RAM® Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. The diamond base adapter contains the industry standard universal 2-hole AMPS hole pattern, which will connect to a large variety of RAM® Mount and third-party holders. The mount is designed with a RAM® 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. Features: Includes a small version of the RAM® Tough-Claw™ and medium length B size RAM® double socket arm with diamond plate features industry-standard AMPS pattern and measures 2.43" x 1.31" A small version designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surface Made of marine-grade aluminum, high-strength composite, and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Clamp Range: .625" - 1.14" diameter Socket to Socket Length: 3" Hole Pattern: 2-Hole AMPS: 1.912" Plate Size: 2.43" x 1.31" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum and high-strength composite Packaging Type: Polybag Weight: 0.69 lbs

RAM Glare Shield Clamp Mount with Diamond Base Adapter The RAM-B-177U consists of a double socket arm, glare shield clamp base and diamond base adapter. The RAM-B-177U is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application. The hole pattern found on the diamond base adapter will connect to most RAM cradles. Mount will attach to flat surfaces with the following dimensions: Min: 4.4mm / 0.17" Max: 28.0mm / 1.12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Yoke Clamp Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad Part #: RAM-B-121-TAB3U The RAM-B-121-TAB3U consists of a double socket arm, universal diamond base, yoke clamp base and Tab-Tite™ cradle. The clamp base will accommodate rails in diameter from 0.625" to 1.25". Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ mount to your optimum viewing position. The RAM Tab-Tite™ is compatible with the following tablets: Apple iPad Apple iPad 2 Apple iPad's with bumper or case including the Otterbox case HP TouchPad HP TouchPad's with bumper or case including the Otterbox case Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size