|
SG-DA61500 Signature Series 1500W - 6 Channel Amp
Bring your music to life with our range of powerful Signature Series amplifiers, designed to enhance any serious on-board audio system.
CLASS-D AMPLIFIER TECHNOLOGY
The highly efficient Class-D amplifier design ensures low current draw from the battery whilst delivering increased power to the connected speakers and/or subwoofers. Taking your audio entertainment experience to a whole new level, the Signature Series amplifiers are built for high performance.
RIGID ALUMINIUM ALLOY HEAT SINK
Molded to form a singular die-cast chassis, the fin layout is calculated with precision to increase the surface area of the heat sink. This creates greater dissipation of heat and unquestionable efficiency without compromising the sleek form factor.
MARINE READY DESIGN
The Signature Series amplifiers are designed specifically for marine use, with conformal coated PCBs to provide extra protection from the marine elements. This extends the products’ lives and ensures that the amplifiers will continue to perform season after season on board.
STAINLESS MIRROR FINISH
The stunning stainless steel cover conceals all cable connections and tuning controls for a discreet yet undeniably attractive finish that will complement any installation. The stainless steel design also ensures that your Signature Series amplifier will resist rust and corrosion, extending the product life while maintaining a clean, tidy appearance.
TRUE-MARINE™ PHILOSOPHY
Fusion’s True-Marine design philosophy stems from our experience confronting the harsh marine environment. By designing and engineering from the ground up specifically for real world boating applications, our customers are assured that the equipment they fit into their vessel will deliver quality entertainment season after season.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
779.99 |
|
|
SG-24DA61500 Signature Series 1500W - 6 Channel Amplifier - 24V
The Signature Series 24-volt 6-channel marine amplifier is designed for boats operating on 24-volt electrical systems. With a peak power of 1500-watts, it provides incredible power delivery to your onboard audio entertainment. The plug-and-play setup allows for easy installation without the need for an additional power adaptor.
Fusion Signature Series amplifiers are purpose-built for the marine environment. Boasting some of the most impressive environmental protection available, they deliver a Signature performance on the water like never before.
Features:
Class-D Amplifier Technology: The highly efficient Class-D design provides 1500-watt peak power while drawing less current than a standard Class-AB amplifier. This design provides increased efficiency and power output to your speakers and subwoofers, letting you enjoy your music for longer without needing to worry about battery drain.
1500-Watt Peak Power: With a peak power of 1500-watts, you can easily power up to 6 pairs of speakers OR up to 4 pairs of speakers and 1 subwoofer.
Marine-Ready Design with Conformal Coated PCBs: Extending the life of your amplifiers, the Signature Series amplifiers are designed specifically for marine use with conformal coated PCBs to provide extra protection from the marine elements.
Rigid Aluminum Alloy Heat Sink: Molded to form a singular die-cast chassis, the fin layout is calculated with precision to increase the surface area of the heat sink and improve heat dissipation.
Stainless Steel Mirror Finish: The polished stainless steel control panel cover conceals and helps protect all cable connections and the settings control panel while providing an attractive finish to complement any installation.
Speaker Configuration: Whether you require 2 ohms per channel or 4 ohms bridged, the Signature Series amplifier has your installation options covered to achieve optimum output levels. Connect up to 2 speakers per channel (2 x 4 ohm speakers in parallel) with the SG-24DA61500.
Zone Designation: To align with the Fusion Entertainment System Zone philosophy, the input and output connections are labeled as zones.
Technical Specifications:
Frequency Response : 10 Hz to 40 kHz (-3dB @ 4 Ohm rated power)
Peak Power Output: 1500 W
Rated Power Output (4 Ohm): 100 W rms x 6 @ 28.8 V input < 1% THD + N (EIA/CEA-490A)
Rated Power Output (2 Ohm): 140 W rms x 6 @ 28.8 V input < 1% THD + N (EIA/CEA-490A)
Rated Power Output (4 Ohm Bridged): 280 W rms x 3 @ 28.8 V input < 1% THD + N (EIA/CEA-490A)
Input Sensitivity: 0.3 V to 8 V rms, user adjustable
Input Impedance: 7k Ohm nominal
High-Pass/Low-Pass Full Range Filter: Yes, user selectable
Filter Cross-Over Frequency: 32 Hz to 320 Hz, user adjustable
Bass-Boost: 0 to 9 dB, user adjustable (zone 3 only)
Operating Voltage: 21.6 V to 32 V dc
Remote Switch-On: Yes - 6 V threshold
Current Consumption (Standby): < 1 mA @ 28.8 V input
Current Consumption (Idle): < 1.25 A @ 28.8 V input
Current Consumption (Max): 35 A @ 28.8 V input
Fuse Rating: 3 x 20 A ATC Blade-Type (SAE J1171 Compliant)
Protection Circuits: Reverse-Voltage, Input Under/Over Voltage, Over-Temperature, Output Short-Circuit
Operating Temperature Range: 0 to 50°C (32 to 122°F)
Ingress Protection Rating: Dry area installation only
Dimensions: 420 mm (L) x 210 mm (W) x 57 mm (H) or 16-9-16" (L) x 8-1/4" (W) x 2-1/4" (H)
Weight: 5.15 kg or 11.35 lb with cover
Warranty: 3 years
In the Box:
Four 8-gauge, self-tapping screws
3 mm hex key (for the top cover and power terminals)
2.5 mm hex key (for the speaker terminals)
Polishing cloth
Spare J1171 compliant 20 A blade-type fuses (only included with 24-Volt Signature Series 6 Channel 1500-Watt amplifier)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
779.99 |
|
|
SG-DA51600 Signature Series - 1600W, 5 Channel Amplifier
Powerful, Rock-The-Boat Sound!
1600 Watts of Class D output run the speakers and sub off of one powerful amp.
Features:
5-Channel, 1600 Watt, Class D amplifier
Can amplify up to 4 pairs on Fusion speakers (speakers run in parallel on 4-channels) and the MS-SW10 Fusion Subwoofer
2-Ohm Stable
Superior 1 piece HEAVY-DUTY die cast chassis
5-Way circuitry protection - Thermal/Reversed Power Polarity/DC Offset Protection/High + Low Voltage
Discrete install panel-covers amp set-up controls and hides all cabling
FLFC low frequency control-accurate fine tuning of frequency response
Conformal coated PCB
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
779.99 |
|
|
SG-DA41400 Signature Series - 1400W, 4 Channel Amplifier
Powerful, Rock-The-Boat Sound!
1400 Watts of Class D output will run up to 4 pairs of speakers.
Features:
4-Channel, 1400 Watt, Class-D Amplifier
Can amplify up to 4-pairs of Fusion speakers (speakers run in parallel on 4-channels)
2-Ohm Stable
Superior 1-piece HEAVY-DUTY die cast chassis
5-Way circuitry protection Thermal/Reversed Power Polarity/DC Offset Protection/High + Low Voltage
Discrete Install Panel-Covers Amp set-up controls and hides all cabling
FLFC Low Frequency Control-Accurate fine tuning of frequency response
Conformal coated PCB
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
539.99 |
|
|
SG-DA8200 Signature Series 2000W - 8 Channel Amp
Bring your music to life with our range of powerful Signature Series amplifiers, designed to enhance any serious on-board audio system.
CLASS-D AMPLIFIER TECHNOLOGY
The highly efficient Class-D amplifier design ensures low current draw from the battery whilst delivering increased power to the connected speakers and/or subwoofers. Taking your audio entertainment experience to a whole new level, the Signature Series amplifiers are built for high performance.
RIGID ALUMINIUM ALLOY HEAT SINK
Molded to form a singular die-cast chassis, the fin layout is calculated with precision to increase the surface area of the heat sink. This creates greater dissipation of heat and unquestionable efficiency without compromising the sleek form factor.
MARINE READY DESIGN
The Signature Series amplifiers are designed specifically for marine use, with conformal coated PCBs to provide extra protection from the marine elements. This extends the products’ lives and ensures that the amplifiers will continue to perform season after season on board.
STAINLESS MIRROR FINISH
The stunning stainless steel cover conceals all cable connections and tuning controls for a discreet yet undeniably attractive finish that will complement any installation. The stainless steel design also ensures that your Signature Series amplifier will resist rust and corrosion, extending the product life while maintaining a clean, tidy appearance.
TRUE-MARINE™ PHILOSOPHY
Fusion’s True-Marine design philosophy stems from our experience confronting the harsh marine environment. By designing and engineering from the ground up specifically for real world boating applications, our customers are assured that the equipment they fit into their vessel will deliver quality entertainment season after season.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1019.99 |
|
|
SG-DA12250 Signature Series - 2250W, Mono Amplifier
Powerful Mono Block
Specifically for customers that want the sub(s) to hit loud and proud.
Features:
Mono Block, 1600 Watt, Class-D Amplifier
2250W of Peak Power to drive up to 2 Fusion Signature Subwoofers
2-Ohm Stable
1-piece HEAVY-DUTY die cast chassis
5-Way circuitry protection - Thermal/Reversed Power Polarity/DC Offset Protection/High + Low Voltage
Discrete install panel-covers amp set-up controls and hides all cabling
FLFC Low Frequency Control-Accurate fine tuning of frequency response
Conformal coated PCB
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
539.99 |
|
|
Signature Series 3i 6.5" Classic Speakers - White
The new Signature Series 3i range of premium marine speakers, subwoofers, wake tower speakers and tweeters delivers crystal-clear audio and withstands marine conditions like never before.
With an enhanced design for the harsh marine environment, the Signature Series 3i range features new marinized connectors and a redesigned grille for easy installation and superior protection. Incorporating premium materials and superior acoustic engineering, you can enjoy that uncompromisingly pure listening experience on your boat, season after season.
Combining function and style, the Signature Series 3i range is made for life on the water, just like you.
Features:
Delivers premium sound quality suited for the marine environment
Marinized design with IP65 rating
Designed to optimally work with Fusion stereo systems and amplifiers
True-Marine™ design from Fusion
Defined high-fidelity, low-frequency acoustics are a result of the excellent self-damping and bass reproduction
Technical Specifications:
Peak Power - 230 Watts
RMS Power - 75 Watts
Nominal Impedance - 4 ohms
Overall Dimensions (Diameter x Depth) - 7.87" x 4.06" (200 x 103 mm)
Mounting Depth - 3.11" (79 mm)
Sensitivity - 90 dB
Weight - 3 lbs per speaker (1.35 kg)
LED Lighting - No
In the Box:
One (1) Pair of speakers
Mounting hardware
Two (2) water-resistant cable assemblies with 2-pin connector (5.9" (150mm))
Instruction manual
*Sold as a Pair
|
455.99 |
|
|
Signature Series 3i 6.5" Sports Speakers - White
The Signature Series 3i range of premium marine speakers, subwoofers, wake tower speakers, and tweeters delivers crystal-clear audio and withstands marine conditions like never before.
With an enhanced design for the harsh marine environment, the Signature Series 3i range features new marinized connectors and a redesigned grille for easy installation and superior protection. Incorporating premium materials and superior acoustic engineering, you can enjoy that uncompromisingly pure listening experience on your boat, season after season.
Features:
Delivers premium sound quality suited for the marine environment
Marinized design with IP65 rating
Designed to optimally work with Fusion stereo systems and amplifiers
True-Marine™ design from Fusion
Defined high-fidelity, low-frequency acoustics are a result of the excellent self-damping and bass reproduction
Technical Specifications:
Peak Power - 230 Watts
RMS Power - 75 Watts
Nominal Impedance - 4 ohms
Overall Dimensions (Diameter x Depth) - 6.93" x 4.11" (176 x 104.5 mm)
Mounting Depth - 3.11" (79 mm)
Sensitivity - 90 dB
Weight - 2.8 lbs per speaker (1.29 kg)
LED Lighting - No
In the Box:
One (1) Pair of speakers
Mounting hardware
Two (2) water-resistant cable assemblies with 2-pin connector (5.9" (150mm))
Instruction manual
*Sold as a Pair
|
479.99 |
|
|
Signature Series 3i 6.5" Sports Speakers - Grey
The Signature Series 3i range of premium marine speakers, subwoofers, wake tower speakers, and tweeters delivers crystal-clear audio and withstands marine conditions like never before.
With an enhanced design for the harsh marine environment, the Signature Series 3i range features new marinized connectors and a redesigned grille for easy installation and superior protection. Incorporating premium materials and superior acoustic engineering, you can enjoy that uncompromisingly pure listening experience on your boat, season after season.
Features:
Delivers premium sound quality suited for the marine environment
Marinized design with IP65 rating
Designed to optimally work with Fusion stereo systems and amplifiers
True-Marine™ design from Fusion
Defined high-fidelity, low-frequency acoustics are a result of the excellent self-damping and bass reproduction
Technical Specifications:
Peak Power - 230 Watts
RMS Power - 75 Watts
Nominal Impedance - 4 ohms
Overall Dimensions (Diameter x Depth) - 6.93" x 4.11" (176 x 104.5 mm)
Mounting Depth - 3.11" (79 mm)
Mounting Depth - 3.11" (79 mm)
Sensitivity - 90 dB
Weight - 2.8 lbs per speaker (1.29 kg)
LED Lighting - No
In the Box:
One (1) Pair of speakers
Mounting hardware
Two (2) water-resistant cable assemblies with 2-pin connector (5.9" (150mm))
Instruction manual
*Sold as a Pair
|
539.99 |
|
|
Signature Series 3i 6.5" Wake Tower CRGBW Speakers - White
The new Signature Series 3i range of premium marine speakers, subwoofers, wake tower speakers and tweeters delivers crystal-clear audio and withstands marine conditions like never before.
With an enhanced design for the harsh marine environment, the Signature Series 3i range features new marinized connectors and a redesigned grille for easy installation and superior protection. Incorporating premium materials and superior acoustic engineering, you can enjoy that uncompromisingly pure listening experience on your boat, season after season.
With the included CRGBW LED illumination, the vibe on board is complete. Combining function and style, the Signature Series 3i range is made for life on the water, just like you.
*Mounting hardware not included.
Features:
Delivers premium sound quality suited for the marine environment
Marinized design with IP65 rating
Designed to optimally work with Fusion stereo systems and amplifiers
Custom DSP profiles with CRGBW illumination for a more ambient listening experience
True-Marine™ design from Fusion
Defined high-fidelity, low-frequency acoustics are a result of the excellent self-damping and bass reproduction
Flat mount and pipe mount mounting bracket accessory options
Technical Specifications:
Peak Power - 230 Watts
RMS Power - 75 Watts
Nominal Impedance - 4 ohms
Overall Dimensions (Diameter x Depth) - 6.93" x 9.21" (176 x 234 mm)
Sensitivity - 90 dB
Weight - 4.7 lbs per speaker (2.13 kg)
LED Lighting - Yes, CRGBW
In the Box:
One (1) Pair of wake tower speakers
Instruction Manual
*Sold as a Pair
|
839.99 |
|
|
Signature Series 3i 6.5" Wake Tower CRGBW Speakers - Black
The new Signature Series 3i range of premium marine speakers, subwoofers, wake tower speakers and tweeters delivers crystal-clear audio and withstands marine conditions like never before.
With an enhanced design for the harsh marine environment, the Signature Series 3i range features new marinized connectors and a redesigned grille for easy installation and superior protection. Incorporating premium materials and superior acoustic engineering, you can enjoy that uncompromisingly pure listening experience on your boat, season after season.
With the included CRGBW LED illumination, the vibe on board is complete. Combining function and style, the Signature Series 3i range is made for life on the water, just like you.
*Mounting hardware not included.
Features:
Delivers premium sound quality suited for the marine environment
Marinized design with IP65 rating
Designed to optimally work with Fusion stereo systems and amplifiers
Custom DSP profiles with CRGBW illumination for a more ambient listening experience
True-Marine™ design from Fusion
Defined high-fidelity, low-frequency acoustics are a result of the excellent self-damping and bass reproduction
Flat mount and pipe mount mounting bracket accessory options
Technical Specifications:
Peak Power - 230 Watts
RMS Power - 75 Watts
Nominal Impedance - 4 ohms
Overall Dimensions (Diameter x Depth) - 6.93" x 9.21" (176 x 234 mm)
Sensitivity - 90 dB
Weight - 4.7 lbs per speaker (2.13 kg)
LED Lighting - Yes, CRGBW
In the Box:
One (1) Pair of wake tower speakers
Instruction Manual
*Sold as a Pair
|
899.99 |
|
|
Signature Series 3i 6.5" CRGBW Sports Speakers - White
The new Signature Series 3i range of premium marine speakers, subwoofers, wake tower speakers and tweeters delivers crystal-clear audio and withstands marine conditions like never before.
With an enhanced design for the harsh marine environment, the Signature Series 3i range features new marinized connectors and a redesigned grille for easy installation and superior protection. Incorporating premium materials and superior acoustic engineering, you can enjoy that uncompromisingly pure listening experience on your boat, season after season.
With the included CRGBW LED illumination, the vibe on board is complete. Combining function and style, the Signature Series 3i range is made for life on the water, just like you.
Features:
Delivers premium sound quality suited for the marine environment
Marinized design with IP65 rating
Designed to optimally work with Fusion stereo systems and amplifiers
Custom DSP profiles with CRGBW illumination for a more ambient listening experience
True-Marine™ design from Fusion
Defined high-fidelity, low-frequency acoustics are a result of the excellent self-damping and bass reproduction
Technical Specifications:
Peak Power - 230 Watts
RMS Power - 75 Watts
Nominal Impedance - 4 ohms
Overall Dimensions (Diameter x Depth) - 6.93" x 4.11" (176 x 104.5 mm)
Mounting Depth - 3.11" (79 mm)
Sensitivity - 90 dB
Weight - 2.8 lbs per speaker (1.29 kg)
LED Lighting - Yes, CRGBW
In the Box:
One (1) Pair of speakers
Mounting hardware
Two (2) water-resistant cable assemblies with 2-pin connector (5.9" (150mm))
Instruction manual
*Sold as a Pair
|
599.99 |
|
|
Signature Series 3i 6.5" CRGBW Sports Speakers - Grey
The new Signature Series 3i range of premium marine speakers, subwoofers, wake tower speakers and tweeters delivers crystal-clear audio and withstands marine conditions like never before.
With an enhanced design for the harsh marine environment, the Signature Series 3i range features new marinized connectors and a redesigned grille for easy installation and superior protection. Incorporating premium materials and superior acoustic engineering, you can enjoy that uncompromisingly pure listening experience on your boat, season after season.
With the included CRGBW LED illumination, the vibe on board is complete. Combining function and style, the Signature Series 3i range is made for life on the water, just like you.
Features:
Delivers premium sound quality suited for the marine environment
Marinized design with IP65 rating
Designed to optimally work with Fusion stereo systems and amplifiers
Custom DSP profiles with CRGBW illumination for a more ambient listening experience (
True-Marine™ design from Fusion
Defined high-fidelity, low-frequency acoustics are a result of the excellent self-damping and bass reproduction
Technical Specifications:
Peak Power - 230 Watts
RMS Power - 75 Watts
Nominal Impedance - 4 ohms
Overall Dimensions (Diameter x Depth) - 6.93" x 4.11" (176 x 104.5 mm)
Mounting Depth - 3.11" (79 mm)
Sensitivity - 90 dB
Weight - 2.8 lbs per speaker (1.29 kg)
LED Lighting - Yes, CRGBW
In the Box:
One (1) Pair of speakers
Mounting hardware
Two (2) water-resistant cable assemblies with 2-pin connector (5.9" (150mm))
Instruction manual
*Sold as a Pair
|
659.99 |
|
|
Pushing the boundaries of what is possible on the water even further — the new Signature Series 3 Wake Tower speakers deliver stunning Fusion signature performance optimized for wake boat applications. Now with premium CRGBW LED lighting, they bring you an unparalleled on-water audio entertainment experience.
The Signature Series 3 Wake Tower speakers feature industry-first CRGBW LED lighting. With Cool White and Warm White LEDs in addition to standard RGB - you can create a wider range of color blends from premium pastels to vibrant hues with 3 times the industry standard.
Specials Closeouts Remanufactured Rebates
|
|
|
Apollo Marine 6 Channel 1800-Watt Amplifier
This 6-channel amplifier with 150-watt RMS per channel can power up to six pairs of speakers or four pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.
Features:
Keep the music going for longer without draining your battery as quickly
No more manual adjustments to your audio settings. The Easy Tune feature does it for you
A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating
Less distortion and noise, so you enjoy quality audio
Mounting brackets are included for simple installation
Don’t worry about potential overheating damage with our ignition protection design
Power & Efficiency
The Apollo amplifiers are designed to produce impressive power with less drain on your battery. This amp produces 150-watt RMS per channel.
Easy Tune Feature
These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, users can get the best quality sound without making manual adjustments.
Less Distortion
Some amplifiers distort audio when they add power. Fusions are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes.
LED Indicators
Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts, as well as temperature.
Mounting Brackets
Easily install the amplifiers on board with the included mounting brackets.
Ignition Protected
The ignition-protected design helps prevent potential damage from overheating.
Conformal-Coated PCBS
The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements.
2 OHM Stable
Connect up to two speakers per channel, increasing setup options.
Fusion True-Marine Design
The amplifier is designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration, and UV.
In the Box:
One Apollo 6-channel amplifier
One mounting bracket
One power connector
Three speaker connectors with high-power mode adapters
Four 8-gauge, flat-head self-tapping screws
Four 8-gauge, pan-head self-tapping screws (for mounting bracket)
Four screw covers
Fuse holder
Mounting template
Installation instructions
ISPI
Specifications:
Physical Dimensions without Bracket (L x W x H): 11.69" x 7.06" x 1.75" (297 x 180 x 45 mm)
Physical Dimensions with Bracket (L x W x H): 11.69" x 7.06" x 2.13" (297 x 180 x 50 mm)
Weight: 5.95 lb (2.7 kg)
Water Rating: IPX2
Amplifier Class: Class-D
CEA-2006 Power Rating: 150 watt RMS x 6 @ 14.4 V input - 4 ohm < 1% THD
Total Rated Power Output, 2 Ohm (Watts): 290 watt RMS x 6 @ 14.4 V input - 2 ohm < 1% THD
Total Rated Power Output, 4 ohm Bridged (watts): 580 watt RMS x 3 @ 14.4 V input - 4 ohm Bridged < 1% THD
Peak Power (watts): 1800 watts
Input Sensitivity: 1.6 V RMS
Input Impedance: 22k ohm
Operating Voltage: 10.8 V - 16 V DC
Current Draw, in Standby/off Using Amplifier on Wire: < 5 mA @ 14.4 V input
Current Draw, On, No Audio: < 1.32 A @ 14.4 V input
Fuse Rating: 125 A electronic fuse (no replacement necessary)
Power-Cable Fuse Model and Rating: Bussmann™ BK/AMI-030 30 A fast-acting
Ignition Safety Protected (SAE J1171): Yes
Protection Circuits: Reverse voltage, input under/over voltage, over temperature, and output short circuit
Operating temperature range: 32° to 122° F (0° to 50° C)
Warranty: 3 years
|
959.99 |
|