|
TV1 Dome Top with Labels & Mounting Hardware *Base Not Included
Replacement dome top for KVH TV1 (does not include base).
|
341.36 |
|
|
StarPod Housing Only for Starlink Roam/RV Antenna - Base Not Included
The StarPod from NavPod is a waterproof housing designed for permanent mounting of the Starlink Roam/RV antenna, typically on a yacht’s hardtop or radar arch. The StarPod housing fits Starlink model UTA-212 (dish face measuring 20.2” x 11.9” / 513 mm x 303 mm).
NavPod model SP212-H includes the StarPod housing only and is intended for installations where the housing will be mounted on an existing or third-party pedestal. A compatible pedestal should have an upper mounting surface no larger than a 7.5” diameter circle, which is the available mounting surface on the bottom of a StarPod housing.
Third-Party Accessory Disclaimer:
The NavPod and StarPod brands are in no way affiliated with the Starlink or SpaceX brands. The company's products are third-party accessories, distinct from the brands and products they are designed to house.
What are the benefits of mounting a Starlink dish in a StarPod?
StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Testing has proven that there is no degradation of signal inside the thermoformed acrylic-capped ABS housing.
The Starlink Roam dish was originally designed for RVs, not boats. Its waterproof rating of IP54 is a long way from the IP67 rating NavPod is accustomed to in boating from the likes of Garmin, Raymarine, and others. Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other marine electronics for over 25 years.
How do I mount a Starlink dish inside a StarPod?
The 4-legged "X" base that comes with a Starlink Roam dish is not utilized when mounting inside a StarPod; only the dish and attached mounting pole are used. The center post of the Starlink dish is inserted through the center hole in the bottom of the StarPod and extends into the chosen mounting pedestal.
The initial Starlink setup process should be completed before mounting the dish inside a StarPod (refer to your Starlink setup and installation guide for this process). One important thing to note during the setup process is to make sure that the "Snow Melt" setting in the Starlink app is turned to "Off" (this feature produces excess heat to keep snow from piling up on a Starlink dish in winter environments, but is unnecessary and can potentially cause overheating when the dish is mounted inside a housing).
Once the initial Starlink setup process is complete, the next step is to get the dish into a horizontal, or "flat" position, perpendicular to the mounting post. To get the dish into this position, unplug the Starlink dish, then plug it back in and turn it on. The dish will begin to move as part of its startup process, so just wait until it’s in a horizontal position and unplug the dish. This may take a couple of attempts, so just repeat as necessary until the dish is powered off in a horizontal or "flat" position. At this point, the dish can now be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod).
How can the Starlink dish move if it’s inside a StarPod?
It can’t, but that’s okay. When powered on inside the StarPod housing, the Starlink dish will initially move as it looks for a signal. However, when the dish bumps into the inside of the housing and is unable to move any further, it will simply register an obstruction and discontinue its movement (a feature built
into the dish to prevent the motor from burning out when it’s positioned next to a tree branch, ceiling, or other obstruction). The StarLink app may notify you of the obstruction, but the dish will continue to operate normally otherwise.
There are several methods you can find on the internet for disabling your Starlink motor to achieve a fixed position. While these methods can be effective, it’s important to note that any modification of your Starlink antenna (drilling or cutting into the case, disconnecting internal cables, or any disassembly at all) will void the product warranty.
If the Starlink dish can’t move, how can it get a good signal?
Short Answer: A Starlink dish installed on a boat in a fixed horizontal position will achieve the same signal quality as a dish that’s free to move and adjust position.
Long Answer: The Starlink Roam dish utilizes phased array technology. Rather than searching for a single satellite to point to (like older 18" and 24" satellite TV antennas), the Starlink dish is continuously switching between different satellites every few minutes (satellites that are moving at very high speeds and orbiting much lower than traditional TV and internet satellites). When a Starlink dish moves, it isn’t trying to point toward a particular satellite; it’s just looking for a clear view of the sky. Since this dish was originally designed for RV use, the movement of the dish was designed to allow it to point away from overhead obstructions like trees and buildings that might prevent a clear view of the sky. While this functionality makes sense for RV use, it is much less functional for boating use, where the dish would almost never encounter any overhead obstructions.
When testing, a Starlink dish mounted and immobilized inside a StarPod achieved the same signal quality and internet speed as a dish that was free to move outside of a housing. Neither the fixed horizontal positioning nor the housing material itself resulted in any signal degradation as long as the dish had an otherwise clear view of the sky (as it typically would on a floating vessel).
Liability Disclaimer:
NavPod assumes no liability for any violation of Starlink product warranty or terms of service that may result from modifying a Starlink dish or mounting it inside a StarPod.
General Information:
StarPod is manufactured by Ocean Equipment in Bend, Oregon, USA, using the same time-proven materials that are used to fabricate the popular line of NavPods, waterproof housings for marine electronics.
All NavPods Feature:
Structural Rigidity – The Gen3 enhancements now include a thicker gauge of acrylic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All NavPods are manufactured with a double gasket system, providing an excellent watertight seal. This seal provides the best protection for your marine electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job.
Nickel Chrome-Plated Stainless Steel – The company uses all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets to match the NavPod wrench for better holding ability when tightening. The nickel-chrome-plated stainless steel tamper-resistant screws provide security combined with a little style!
Commitment to Quality – Navpod stands behind its commitment by offering a 10-year warranty on all new NavPods, including the StarPod.
|
436.34 |
|
|
RAM Base & Ball w/Garmin Mounting Hardware
The RAM-B-202-G2U, marine grade aluminum base, consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has a three hole pattern which will connect to the base of the Garmin Marine GPS unit swivel mounts.
This base is designed to connect to the following devices:
Garmin Fishfinder 120
Garmin Fishfinder 140
Garmin Fishfinder 160C
Garmin Fishfinder 250/250C
Garmin Fishfinder 320C
Garmin Fishfinder 340C
Garmin Fishfinder 400C
Garmin Fishfinder 80
Garmin Fishfinder 90
Garmin GPSMAP 172 Marine GPS
Garmin GPSMAP 172C Marine GPS
Garmin GPSMAP 176 GPS
Garmin GPSMAP 176C GPS
Garmin GPSMAP 178C Marine GPS
Garmin GPSMAP 276C GPS
Garmin GPSMAP 292 Marine GPS
Garmin GPSMAP 298 Marine GPS
Garmin GPSMAP 376C GPS
Garmin GPSMAP 378 Marine GPS
Garmin GPSMAP 392 Marine GPS
Garmin GPSMAP 398 Marine GPS
Garmin GPSMAP 420 Marine GPS
Garmin GPSMAP 430 Marine GPS
Garmin GPSMAP 440 Marine GPS
Garmin GPSMAP 450 Marine GPS
Garmin GPSMAP 478 Marine GPS
Garmin GPSMAP 492 Marine GPS
Garmin GPSMAP 498 Marine GPS
Garmin GPSMAP 520 Marine GPS
Garmin GPSMAP 525 Marine GPS
Garmin GPSMAP 530 Marine GPS
Garmin GPSMAP 535 Marine GPS
Garmin GPSMAP 540 Marine GPS
Garmin GPSMAP 545 Marine GPS
Garmin GPSMAP 550 Marine GPS
Garmin GPSMAP 555 Marine GPS
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Hardware included with purchase.
|
11.02 |
|
|
RAM Base & Ball w/Garmin Mounting Hardware
RAM-202-G2 universal base consists of a 1.5 inch diameter rubber ball, connected at right angles to a 2.5 inch diameter round base. The base has pre-drilled holes, including the universal AMPS hole pattern. The RAM-202-G2 comes with a custom hardware pack for assembly for your Garmin Fishfinder.
The ""U"" in the part number reflects product packaged in poly bag. For additional specifications, see components and drawings tabs.
Ball Size: 1.5 Inch Rubber Ball
Color: Black Powder Coat
Material: Powder Coated Marine Grade Aluminum
|
16.36 |
|
|
1.5" Ball Mount w/2.5" Round Base, Short Arm & 1.5" x 3" Plate f/Humminbird Helix 5 Only
The RAM-202-153-B-202U consists of a round 2.5" diameter round base (Universal AMPs Hole Pattern), short double socket arm and 1.5" x 3" rectangular base. The rectangular base contains four holes with a center to center pattern of 1" x 2.5". For most applications, mount will support up to ten pounds.
Features:
Compatible Devices: Humminbird Helix 5
Center to Center Hole Pattern: 1" x 2.5"
Weight Capacity: 10 lbs.
Overall Height: 5.225"
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1.5" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag. Hardware for mounting to device not included with purchase.
Weight: 0.19 lbs.
|
44.88 |
|
|
Power-Grip™ XL Universal Scanner Gun Holder
The RAM® Power-Grip™ XL universal scanner gun holder is designed for use with several large form factor scanner guns and is RAM® Mounts Compatible™ with a full range of ball and socket forklift mounting systems. Using high-strength composite materials, the RAM® Power-Grip™ XL secures scanner guns even when not in use. When required, easily remove the scanner gun to quickly scan the desired item. This holder features two attachment points. First, the hole pattern on the back of the holder allows for the connection of the RAM-202U or the RAM-D-254U (hardware is included for these attachments). Second, the hole pattern on the bottom of the holder allows for the connection of a 2” x 3” plate – RAM-202U-23 or RAM-D-202U-23 – or a drill-down mount (hardware is not included for these attachments). To enable use on the go, integrated holes on both sides of the holder allow for the use of a lanyard or the GDS® Shoulder Strap. Elastomeric fins grip the handle of the scanner gun to ensure a secure fit, and can be easily replaced if required.
Internal Dimensions:
Width = 3.96"
Length = 2.66"
Depth = 7.43"
Features:
Unique open bottom design enables scanning while in the holder
Replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required
Form fitted cradle supports and protects device without vibration
High strength materials ensure product longevity
Integrated lanyard holes
Lifetime warranty (excludes fin grips)
Included:
RAM® Power-Grip XL™ Holder
Hardware for attaching to compatible RAM® Mounts
Material:
High Strength Composite
Note: The "U" in the part number reflects product packaged in poly bag. The holder includes a four of two nuts and bolts to connect to any compatible RAM mounts.
|
35.69 |
|
|
Mast Mount f/KVH TV1
Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.
Adjustable
Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.
Incredible Strength
The solid under body construction not only greatly improves strength but also hides radar cables. On certain models.
Accessories
Pre-drilled under body allows for flood lights or horns to be mounted on certain models.
Compatible Units:
Intellian - 12 & i3
KVH - M1DX, M1, TV1, M2, M3, M3DX, M3ST, V3, V3-IP, TV3, V3HTS and V30
Raymarine - 33STV & 37STV
|
436.80 |
|
|
Dome Top Only for HD7 with Mounting Hardware
Features:
Top Half Only
Specifically for KVH's HD7 includes mounting hardware
|
1189.27 |
|
|
Dome Top Only for TV3 with Mounting Hardware
Features:
Top Half Only
Specifically for KVH's TV3 includes mounting hardware
|
351.00 |
|
|
Dome Top Only for TV5 with Mounting Hardware
Features:
Top Half Only
Specifically for KVH's TV5 includes mounting hardware
|
801.46 |
|
|
Starlink Flat Panel Terminal w/Wedge Mount - Gen 3 WiFi Router & 25M (82') PoE Cable Included
The Power and Reliability of KVH the Speed of Starlink
Keep your family, friends, and crew connected when you turn to KVH for a Starlink high-performance terminal, as a standalone solution, or as part of a comprehensive hardware and service solution. Enjoy seamless, intelligent integration of Starlink’s speed and affordability (where available) with KVH’s white glove service, proven global HTS network, multi-channel hybrid connections, and outstanding performance.
Add a Starlink flat panel high-performance terminal to your yacht’s TracNet solution with our simple, single-cable installation and exclusive intelligent hybrid switching to ensure you enjoy the best and fastest communications at all times. For existing TracPhone® terminal users, an easy configuration update and single cable enables automatic switching between KVH’s global HTS network and Starlink for seamless connectivity.
Turn to KVH as your single source for a complete Starlink solution. Enjoy same-day shipping, unmatched customer satisfaction, and 24/7/365 live warranty support and global service through KVH's OneCare Global Support Program. Plus you can activate your Starlink through KVH when it's right for you.
Enhance your onboard communications with fast speeds, affordable data, and KVH's advanced, integrated services for enhanced security, connectivity, and versatility.
Starlink Available as a Standalone Solution or a Supplement to KVH’s Award-winning Connectivity Solutions
Starlink flat panel high-performance terminal and service with high-speed, low-latency Internet
Choice of KVH TracNet™ hybrid terminal with integrated global VSAT, 5G/LTE cellular, and shore-based Wi-Fi bridge, or TracPhone VSAT terminals
KVH ONE™ global hybrid network
Rely on the Speed of Starlink and the Support of KVH
Bringing connectivity to your customers has never been so easy.
Enhance your onboard communication offerings with Starlink and KVH, the world leader in marine connectivity.
Unmatched customer satisfaction with easy activation through KVH
When you order Starlink from KVH, customers are activated when it's right for them (unlike other Starlink suppliers, who start billing for monthly service after shipping).
KVH offers live 24/7/365 Starlink activation service plus plan change and service pause requests!
Rapid activation and no delays mean your customers are always connected while onboard.
Superior performance with KVH connectivity and intelligent hybrid switching
For yacht owners who want the most reliable, versatile connectivity solution afloat, we can help you offer:
Seamless, intelligent integration of Starlink’s speed and affordability with:
KVH’s proven global HTS network
Multi-channel connections
Network management devices
NMEA award-winning TracNet hybrid antennas with VSAT, 5G/LTE, and Wi-Fi all under one dome
Features:
Ultra high-speed data rates (as fast as 350 Mbps down)
Ultra-affordable data (as low as $1.00 per GB)
“Best effort” low latency LEO network
End-to-end data encryption
Fully deployed global satellite network
In the Box:
Flat-High Performance Antenna
Wedge Mount
Power supply w/ wall mount
25m (82') PoE Cable
5m (16.5') Ethernet Cable
1.8m (6') AC Cable f/ Power Supply
Gen 3 Wi-Fi Router kit (mount sold separately) w/ Starlink plug, RJ45 cover, power supply and cables
1.5m (5') Gen 3 Router Ethernet Cable
1.5m (5') Gen 3 Router AC Power Cable
American-to-European outlet plug adapter
KVH Starlink Tech Support Phone Number - 888-584-5714
KVH Starlink Activation Phone Number - 866-399-8509
|
3334.99 |
|
|
KVH V30 Modular Top Plate
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Compatible Units:
KVH V30
|
196.80 |
|
|
Starlink Flat Panel Terminal with Wedge Mount & 25m PoE Cable - Router & Ethernet Adapter Not Included
**This kit does not include a router or ethernet adapter
The Power and Reliability of KVH the Speed of Starlink
Keep your family, friends, and crew connected when you turn to KVH for a Starlink high-performance terminal, as a standalone solution, or as part of a comprehensive hardware and service solution. Enjoy seamless, intelligent integration of Starlink’s speed and affordability (where available) with KVH’s white glove service, proven global HTS network, multi-channel hybrid connections, and outstanding performance.
Add a Starlink flat panel high-performance terminal to your yacht’s TracNet solution with our simple, single-cable installation and exclusive intelligent hybrid switching to ensure you enjoy the best and fastest communications at all times. For existing TracPhone® terminal users, an easy configuration update and single cable enables automatic switching between KVH’s global HTS network and Starlink for seamless connectivity.
Turn to KVH as your single source for a complete Starlink solution. Enjoy same-day shipping, unmatched customer satisfaction, 24/7/365 live warranty support, and global service through KVH's OneCare Global Support Program. Plus you can activate your Starlink through KVH when it's right for you.
Enhance onboard communications with fast speeds, affordable data, and KVH's advanced, integrated services for enhanced security, connectivity, and versatility.
Starlink Available as a Standalone Solution or a Supplement to KVH’s Award-winning Connectivity Solutions
Starlink flat panel high-performance terminal and service with high-speed, low-latency Internet
Choice of KVH TracNet™ hybrid terminal with integrated global VSAT, 5G/LTE cellular, and shore-based Wi-Fi bridge, or TracPhone VSAT terminals
KVH ONE™ global hybrid network
Rely on the Speed of Starlink and the Support of KVH
Bringing connectivity to your customers has never been so easy.
Enhance your onboard communication offerings with Starlink and KVH, the world leader in marine connectivity.
Unmatched customer satisfaction with easy activation through KVH
When you order Starlink from KVH, customers are activated when it's right for them (unlike other Starlink suppliers, who start billing for monthly service after shipping).
KVH offers live 24/7/365 Starlink activation service plus plan change and service pause requests!
Rapid activation and no delays mean your customers are always connected while onboard.
Superior performance with KVH connectivity and intelligent hybrid switching
For yacht owners who want the most reliable, versatile connectivity solution afloat, we can help you.
Seamless, intelligent integration of Starlink’s speed and affordability with:
KVH’s proven global HTS network
Multi-channel connections
Network management devices
NMEA award-winning TracNet hybrid antennas with VSAT, 5G/LTE, and Wi-Fi all under one dome
Features:
Ultra high-speed data rates (as fast as 350 Mbps down)
Ultra-affordable data (as low as $1.00 per GB)
“Best effort” low latency LEO network
End-to-end data encryption
Fully deployed global satellite network
KVH Starlink Tech Support Phone Number - 888-584-5714
KVH Starlink Activation Phone Number - 866-399-8509
|
3104.99 |
|
|
Baseplate Gasket for TV5 - Mounts Under Baseplate
Gasket for under Baseplate for KVH tracVision TV5.
|
86.40 |
|
|
30" Tapered Closed Dome AFT Leaning Radar Mount with Removable Spreader & 10" x 10" Base Plate
The Seaview Tapered Masts are for most 18" to 24" closed dome radars or open array radars up to 4.5'.
Durability
Unlike any other mount available, Seaview takes the finish to another level. We take these Tapered Masts in their raw aluminum form through a process called Chem Film. Chem Film is a chemical conversion coating that is used as a light coat of protective covering over aluminum. After the Chem Film process, it is taken through a 3 part epoxy prime and powder coat. This is all done to ensure the best possible finish and corrosion resistance.
Easy Installation
The lower mounting plate will accept most standard 18" and 24" radar domes or open array radars up to 4.5' in length. No need to drill holes to mount your radar allowing for a quick and easy setup.
Spreaders
Spreaders are fitted with standard 1-14 threaded fittings made out of nylon to eliminate corrosion. (Note: do not exceed 4' antennas on spreaders). The spreaders are also removable to keep shipping costs down.
Top Mounting Plate
Feel free to mount a light to the top mounting plate!
Cable Management
Oval hollow mast section allows for easy cable management.
|
2511.60 |
|