|
The ARM2502 comes with a locking pin designed to lock your TV against the wall during transit. This arm provides the perfect solution to most installations.
Excellent for wall mounting, simply lift the locking pin and the arm swings out to 410mm from the wall. With double linkages this arm can bend and turn to fit almost any application.
The Vesa bracket plate fits 75mm - 100mm - and 125mm mounting arrangements with lockable grub screws. So, you can have the TV fixed to the bracket or unlock the screws and remove it from the bracket and take the TV with you.
The ARM2502 is the perfect choice for multiple application installations.
Weight Capacity: 10 kg (22.05 lbs)
TV Size: 10" to 22"
Mounting: 75mm Vesa, 100mm Vesa, 125mm Vesa all included
Extension: 90mm to 410mm with locking pin
Dimensions: Against wall: 270mm (10.63")H x 195mm (7.68")W x 80mm (3.15")D
Extended: 270mm (10.63")H x 80mm (3.15")W x 410mm (16.14")D
|
117.61 |
|
|
Single Swing Arm Bracket w/Locking Pin
Majestic has a versatile range of swing arm brackets. The ARM101 can be easily removed from the base plat so you can remove the TV and ARM when travelling in harsh conditions. You can also purchase an addition base plate if you would like to move the TV & ARM to a different location!
Majestic has a versatile range of swing arm brackets. The ARM101 can be easily removed from the base plate so you can remove the TV and ARM when travelling in harsh conditions. You can also purchase an addition base plate if you would like to move the TV & ARM to a different location!
The ARM101 is also compatiable with the Majestic locking pin. The locking pin is designed to lock your arm bracket against the wall during transit.
The ARM101 comes in Black and also has removable covers to allow you feed cable through so that your installation is nice and neat. The Vesa plate is designed for Majestic TV's and many other brands.
Note: It is recommended to remove the TV from the wall during off-road transit.
Adjustable angle: 10 degrees up/down
Maximum load: 15kgs
Suitable for TV sizes: 13" - 27"
Distance to wall: 70-235mm
|
131.93 |
|
|
Heavy-Duty Single Swing ARM Lockable LED TV Wall Mount Bracket
Majestic has a versatile range of swing arm brackets all specifically designed to handle the Harsh Marine and Tough Outback environment. Engineered in Australia under the some of the toughest outback conditions found anywhere in the world, you can be assured of the higher quality and reliability of the Majestic product. The Majestic ARM102 Heavy Duty Single Swing ARM Lockable LED TV Wall Mount Bracket comes with a locking pin so that you can lock it in place when travelling.
The TV Vesa plate on the Majestic ARM102 Heavy Duty Single Swing ARM Lockable LED TV Wall Mount Bracket is designed for Majestic TV's and many other brands supporting both 75mm, 100mm and 200mm Vesa combinations. This bracket is designed to hold larger sized TVs' including the Majestic 32" as well as other branded TVs of 23" or above.
Technical Features:
Weight: The physical design of the Majestic ARM102 Heavy Duty Single Swing ARM Lockable LED TV Wall Mount Bracket is designed to be able to withstand the harsh Outback and tough Marine environment. It is designed to be able to hold TV weighing upto 30Kg, and is engineered with both 75mm x 75mm, 100mm x 100mm and 200mm x 200mm Vesa mounting holes or any combination of those, it can be used with all larger Majestic TV's as well as other brands.
Warranty: Majestic products are designed and developed in Australia and exported globally, with over 15 years experience Majestic stands by the quality of our products by providing a 3 year worldwide warranty. Our engineering design team has paid attention to all the important details to ensure that when you purchase a product of this quality and caliber that you can enjoy many years of reliable performance in the toughest conditions where domestic brands will not survive.
Note: It is recommended to remove the TV from the Arm during off-road transit.
Adjustable angle: 10 degrees up/down
Maximum load: 30kgs
Suitable for TV sizes: 23" - 42"
Distance to wall: 70-230mm
Specifications:
Color: Black
Holds up to 30kg
Max TV Size: 42"
Vesa Size: 75mm, 100mm, 200mm
|
117.61 |
|
|
Stainless Steel Table Base w/Locking Pin
Stainless Steel Table Support with Locking Pull Pin
Tube Size: 1-5/8''
Flange Dia.: 6-1/4"
|
102.04 |
|
|
RAM® Tele-Pole™ with 12" & 18" Poles, Double Swing Arms & Round Plate
The RAM-VP-SW1-1218 consists of a 18" lower female Tele-Pole™, 12" upper male Tele-Pole™, double swing arm and 2.5" round base that contains the universal AMPs hole pattern. The lower female Tele-Pole™ will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole™. The height of the Tele-Poles™, combinded, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The double swing arm allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".
Features:
Dual articulating swing arms allows for ideal device placement
Compatible with a variety of RAM® laptop, tablet, and other device holders
Made of powder-coated steel and marine-grade aluminum
Backed by a lifetime warranty
Hardware Included:
Assembly Hardware
(4) 5/16"-18 x 1" Carriage Bolts
(4) 5/16"-18 Hex Nuts
(4) 5/16" Flat Washers
(4) 5/16" Split Lock Washers
(4) Rubber Caps
|
126.49 |
|
|
Nor'Easter Mooring Whips
2 Piece Whips f/Boats up to 30' - Adjustable Base
Monarch Mooring Whips are made of a special solid fiberglass. The poles are cut to specified lengths and the blanks are then centerless ground to give them a precision taper. They are painted to protect them from the deteriorating effects of ultra violet rays from the sun. They provide reliable protection against dockside or seawall damage. They have tapered, solid fiberglass poles, working like strong shock absorbers, to apply constant pressure to your boat- keeping it a safe distance from the dock or seawall. This affords protection against boat wakes, or storms. The Nor' Easter is adjustable and practical, yet has no moving parts.
Monarch Moor Whips are easy to install. The bow and stern lines are tied to a piling, cleats, or the bulkhead (if there is no dock) and the two spring lines criss-cross. These lines are for control of fore and aft movement.
|
1038.24 |
|
|
Nor'Easter Mooring Whips
2 Piece Whips f/Boats up to 36' - Adjustable Base
Monarch Mooring Whips are made of a special solid fiberglass. The poles are cut to specified lengths and the blanks are then centerless ground to give them a precision taper. They are painted to protect them from the deteriorating effects of ultra violet rays from the sun. They provide reliable protection against dockside or seawall damage. They have tapered, solid fiberglass poles, working like strong shock absorbers, to apply constant pressure to your boat- keeping it a safe distance from the dock or seawall. This affords protection against boat wakes, or storms. The Nor' Easter is adjustable and practical, yet has no moving parts.
Monarch Moor Whips are easy to install. The bow and stern lines are tied to a piling, cleats, or the bulkhead (if there is no dock) and the two spring lines criss-cross. These lines are for control of fore and aft movement.
|
1138.32 |
|
|
Sou'Easter Mooring Whips
2 Piece Whips f/Boats up to 23' - Fixed Base
Monarch Mooring Whips are made of a special solid fiberglass. The poles are cut to specified lengths and the blanks are then centerless ground to give them a precision taper. They are painted to protect them from the deteriorating effects of ultra violet rays from the sun. They provide reliable protection against dockside or seawall damage. They have tapered, solid fiberglass poles, working like strong shock absorbers, to apply constant pressure to your boat- keeping it a safe distance from the dock or seawall. This affords protection against boat wakes, or storms. The Sou'Easter offers the budget conscious boater security at a lower price.
Monarch Moor Whips are easy to install. The bow and stern lines are tied to a piling, cleats, or the bulkhead (if there is no dock) and the two spring lines criss-cross. These lines are for control of fore and aft movement.
|
635.96 |
|
|
Nor'Easter Mooring Whips
2 Piece Whips f/Boats up to 23' - Adjustable Base
Monarch Mooring Whips are made of a special solid fiberglass. The poles are cut to specified lengths and the blanks are then centerless ground to give them a precision taper. They are painted to protect them from the deteriorating effects of ultra violet rays from the sun. They provide reliable protection against dockside or seawall damage. They have tapered, solid fiberglass poles, working like strong shock absorbers, to apply constant pressure to your boat- keeping it a safe distance from the dock or seawall. This affords protection against boat wakes, or storms. The Nor' Easter is adjustable and practical, yet has no moving parts.
Monarch Moor Whips are easy to install. The bow and stern lines are tied to a piling, cleats, or the bulkhead (if there is no dock) and the two spring lines criss-cross. These lines are for control of fore and aft movement.
|
886.32 |
|
|
Horizontal 6" Swing Arm Mount with Ball
The RAM-109H-2BU consists of a 6" long STRAIGHT swing arm mounted on a horizontal surface mounting base. At the free end of the mount swing arm is a round 1.5" diameter ball. The connection between the swing arm and the base is a bolt pivot point, and the round plate and arm connection is the RAM ball and socket system. The bolt pivoting point allows a complete 360 degree rotation and the ball and socket system allows a 180 degree vertical pivot with a 360 degree rotation.
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 1.67 lbs.
|
87.73 |
|
|
RAM Security Knob Kit f/ Single Swing Arm
|
19.13 |
|
|
Ram Mount Swing Arms for all Mounts
|
|
|
Vertical Mounting Base with Double 6" Swing Arm and Swivel Single Socket for 1.5" Balls
Features:
Weight: 3.45 lbs.
Double 6" Swing Arm
Swivel Single Socket
Made specifically for 1.5" balls
|
91.28 |
|
|
Horizontal Swing Arm Mount for Lowrance Elite-5 Series
Horizontal Base Mount with Swing Arm C Size 1.5" Ball and Lowrance Mounting Base.
Compatible Devices:
Lowrance Elite-5 Series
|
120.72 |
|
|
RAM Double Swing Arm with 8" Male and No Female Tele-Pole
Material: Powder Coated Steel
Color: Black Powder Coat
|
95.93 |
|