R1 550.2 2-Channel Marine Amplifier Roswell’s R1 550.2 is the ideal amp to run an R1 tower speaker setup. It’s a 2-channel Class-D design that puts out 165 watts RMS per channel at 4Ω and 275 watts RMS per channel at 2Ω. It features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals. Features: Ch 1-2 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 2-channel design Marine-grade durability 4 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology 2 Ohm Stable at 275 watts per channel     Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 165W x 2 / 2Ω: 275W x 2 Bridged: 4Ω: 550W x 1 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Subsonic Filter: 10Hz – 55Hz Phase Control: 0-180º Dimensions: Inches: 1.90 x 7.0625 x 11.125 Centimeters: 4.83 x 17.94 x 28.26

MS-AM402 2 Channel Marine Amplifier - 400W  Features: Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection. Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability. Class-AB Design - The 400 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat. Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life. RCA Line Out - A pass through the RCA output enables linking of multiple amplifiers for enhanced system performance. 2 Channels - Capable of powering 2 speakers, a sub (bridged) or 4 speakers in parallel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

R1 10" Subwoofer Package - White Roswell's R1 10″ subwoofer package takes out the stress of shopping for the correct amp. It includes the Roswell R1 10″ subwoofer and the Roswell R1 550.2 marine amplifier to power it.  Includes: R1 10" Subwoofer (white color)  R1 550.2 Marine Amplifier

R1 10" Subwoofer Package - Anthracite Roswell's R1 10″ subwoofer package takes out the stress of shopping for the correct amp. It includes the Roswell R1 10″ subwoofer and the Roswell R1 550.2 marine amplifier to power it.  Includes: R1 10" Subwoofer (anthracite color)  R1 550.2 Marine Amplifier

R1 900.6 6-Channel Marine Amplifier The R1 900.6 marine-grade amplifier from Roswell is everything a boat's audio system has always wanted. Utilizing a 6-channel Class-D design that puts out 100 watts RMS per channel at 4Ω, these amps are perfect for powering an R1 8″ and R1 6.5″ marine speaker setup.   This amp features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals. Features: Ch 1-6 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 6-channel design Marine-grade durability 2 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 100W x 6 / 2Ω: 165W x 6 Bridged: 4Ω: 300W x 3 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Dimensions: Inches: 1.90 x 7.06 x 13.67 / Centimeters: 4.83 x 17.94 x 34.74

R1 650.4 4-Channel Marine Amplifier The R1 650.4 marine-grade amplifier from Roswell, is everything a boat's audio system has always wanted. These stackable amplifiers utilize a 4-channel Class-D design that puts out 100 watts RMS per channel at 4Ω and is perfect for powering an R1 6.5″ marine speaker setup. Easily bridge and tune with the calibrated crossover controls. Because LEDs create lots of noise issues, this amp features differential RCA inputs for maximum noise rejection. The R1 650.4 is built with fully conformal-coated PCBs and nickel-plated marine-grade wire terminals to ensure their quality. Features: Ch 1-4 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 4-channel design Marine-grade durability 2 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 100W x 4 / 2Ω: 165W x 4  Bridged: 4Ω: 300W x 2 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Subsonic Filter: 10Hz – 55Hz Dimensions: Inches: 1.90 x 7.06 x 11.125 Centimeters: 4.83 x 17.94 x 28.26

Apollo™ Monoblock & 4 Channel Marine Amplifier Mounting Bracket Use this mounting bracket to easily install your Apollo Monoblock or 4 channel marine amplifier. Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.  Technical Specifications: Dimensions (WxHxD) - 4.72" x 6.08" x .39" In the Box: Mounting bracket Four 8-gauge, self-tapping screws *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Apollo™ 6 & 8 Channel Marine Amplifier Mounting Bracket Use this mounting bracket to easily install your Apollo 6/8 channel marine amplifier.  Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.  Technical Specifications: Dimensions (WxHxD) - 7.87" x 6.08" x .39" In the Box: Mounting bracket Four 8-gauge, self-tapping screws *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ME70BT IPX6 4-Channel Marine Amplifier Features: Remote display keypad 4x45 Audio power out 100 Meter Bluetooth range Phone/Android charging USB music Player AUX input NMEA 2000® certified Multiple EQ preset options Backlit 3 line display with adjustable illumination This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NXL-X1000.1D 1-Channel Marine Amplifier - 2000W The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package. The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.   Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters.  The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience. All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification. The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier. Features: Multiple channel input selector - 2 or 4 channel IPX6 Waterproof for Powersports applications Ultra-compact size for easy installation Audio precision quality control verification  Technical Specifications: Number of Channels - 1 Frequency Response - 10Hz - 250KHz 2 Ohm RMS Power (14.4V) Per Channel - 600W 4 Ohm RMS Power (14.4V) Per Channel - 350W Signal-to-Noise Ratio - >82dB Product Dimensions: (L x W x H) - 11.8" x 4.4" x 1.77" (302mm x 112mm x 45mm) *Sold as an Individual

MA4505 5 Channel Marine Amplifier  Weather-resistant & high-performance marine amplifier The weather-resistant & high-performance JBL Marine amplifiers deliver impressive power from a compact chassis designed to withstand outdoor environments. Available with 4-channel and 5-channel outputs. JBL Marine amplifiers incorporate our latest amplifier topology that includes selectable all-, high-, or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions, with power and performance to meet the needs of any outdoor audio system, JBL Marine amplifiers are the perfect match for all of your JBL marine products. Features: 1 amplifier Stainless steel mounting hardware Rubber inserts 4 High-level input adapters 3 spare fuses 2 2-color brand stickers Quick start guide WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NXL-X600.4D 4-Channel Marine Amplifier - 1600W The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package. The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.   Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters.  The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience. All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification. The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier. Features: Multiple channel input selector - 2 or 4 channel IPX6 Waterproof for Powersports applications Ultra-compact size for easy installation Audio precision quality control verification  Technical Specifications: Number of Channels - 4 Frequency Response - 10Hz - 20KHz 2 Ohm RMS Power (14.4V) Per Channel - 4 x 200W 4 Ohm RMS Power (14.4V) Per Channel - 4 x 150W 4 Ohm RMS Power Bridge (14.4V) Channel - 2 x 400W Signal-to-Noise Ratio - >85dB Product Dimensions: (L x W x H) - 9.92" x 4.4" x 1.77" (252mm x 112mm x 45mm) *Sold as an Individual

NXL-X1200.5D 5-Channel Marine Amplifier - 2800W The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package. The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.   Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters.  The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience. All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification. The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier. Features: Multiple channel input selector - 2 or 4 channel IPX6 Waterproof for Powersports applications Ultra-compact size for easy installation Audio precision quality control verification  Technical Specifications: Number of Channels - 5 Frequency Response - 10Hz - 200KHz 2 Ohm RMS Power (14.4V) Per Channel - 4 x 200W 4 Ohm RMS Power (14.4V) Per Channel - 4 x 150W 4 Ohm RMS Power Bridge (14.4V) Channel - 2 x 400W Signal-to-Noise Ratio - >85dB Product Dimensions: (L x W x H) - 12.67" x 4.4" x 1.77" (322mm x 112mm x 45mm) *Sold as an Individual

MS-AM504 4-Channel Marine Amplifier - 500W  Features: Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection. Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability. Class-AB Design - The 500 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat. Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life. RCA Line Out - A pass through RCA output enables linking of multiple amplifiers for enhanced system performance. 4 Channels - Capable of powering 4 speakers, a sub and a pair of speakers or 8 speakers in parallel (2 speakers per channel in parellel @ 2 Ohms). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

JAHD240BT 2-Channel Bluetooth Amplifier - 80W The waterproof JAHD240BT is on the forefront of technology with integrated Bluetooth technology allowing users to stream their audio content using a Bluetooth enabled device.  Now, users can take their personal music library with them on all of their adventures.  All playback and volume options are controlled by the users Bluetooth enabled device. Features: Waterproof (IPX6) Red LED power indicator Epoxy potted enclosure Corrosion resistant (ASTM B117) Technical Specifications: Number of Channels - 2 Frequency Response - 20Hz - 20KHz 2 Ohm RMS Power Per Channel - 1 x 80W Signal-to-Noise Ratio - >95dB Product Dimensions: (W x H x D) - 4.13" x 2.32" x 1.47"  ∗SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.