Handheld Digital Multi-Meter The handheld digital multi-meter provides excellent performance in a portable, durable housing with a large LCD display for clear visibility. With overall circuitry design centering on large-scale IC A/D converters in conjuction with over-load protection the meter makes a great utility instrument. The meter can be used to measure DC and AC voltage, DC current, resistance, positive diode voltage fall and continuity. Features: Measures AC/DC amperage and voltage Measures continuity and resistance Large digital LCD display Backlight feature Test leads included Measurement hold feature Built in EZ stand Continuity tone alert Low battery indicator Specifications: Max Voltage between input terminal and earth ground: CAT 600V Over-range indication: display "1" for the significant digit Automatic display of negative polarity "-" Max LCD display: 1999 (3-1/2 digits) Fuse protection: F-200mA/250V (05 x 20mm) Power Supply: 9V battery, 6F22 or NEDA 1604 Operating Temp: 32° F to 104° F (relative humidity <85%) Storage Temp: 14° F to 122° F (relative humidity <85%) Weight approximate: 0.4 lbs. (including battery) Included: Test leads: electric rating 1000V 10A Battery: 9V, 6F22 or NEDA 1604 Fuse: F-200mA/250V Operator's Manual Holster WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1842 M2 OLED Digital Bilge Meter The M2 Organic LED Digital Monitor measures essential electrical system parameters with adjustable alarms and an auto-dimming display. The M2 Monitors include a MOSFET External Circuit Relay (ECR) which can be used to control external circuits based on any value measured by the M2. Features: Auto-dimming, bright Organic LED display is easy to read 80dB alarm on all models Isolated 500mA MOSFET relay Bilge float switch not included Specifications: Meter: Bilge Function: Monitors up to 4 bilges Alarm/Relay Activation: Run time/hr Cycles/24 hr Average Cycles Display Size: 55mm x 28mm Input Voltage: 7-70V DC Range: 0.3W-1.0W WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LPS-1 Handheld Digital Depth Sounder The LPS-1 is simple to use. Just put it in the water, point and push the ON button. The depth or distance is digitally displayed for 10 seconds before automatically shutting off, with no risk of battery drain. A must for the outdoor enthusiast! Take the compact, lightweight LPS-1 wherever you go: fly-in trips, ice fishing, canoe trips, remote mountain lakes, float tubing, scuba diving and more. For fishing, simply touch it to the surface of the water. For ice fishing, the signal will shoot through clear ice! When diving, use it to check depths or distances to any object under water: reefs, sunken wrecks even the distance to the surface. Waterproof down to 150'. Features: 200 kHz, 22° built-in transducer Reads depth from 1.8 to 200 feet Backlit display for night use Automatic shutoff Uses one 9 volt battery Floats Specifications: Color: Nautical Yellow Weight: 7 oz. Length: 7-3/4" Voltage: 9 volts Max Range: 200 feet Power: 25 Watts WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Digital AC Voltmeter- 10-250VAC Monitor marine/land based power distribution & generating systems (ABYC E-11.11.3.2.) AC voltmeter and AC ammeter are true RMS (ABYC E-11.11.3.2.3.) Surface mount with only two 5/32" diameter holes Window mount in standard 2.5" analog meter cutout (2.90" W X 1.28" H) Three digit LED display (Frequency meters are two digits) Reversed Polarity Protected Splashproof front Includes pigtails, mounting hardware, & instructions

Digital Multi Control 200/200A GX The Digital Multi Control is used to remotely view and adjust AC input currents, and turn on and off the Multi or Quattro. It is designed to integrate cleanly with your boat, vehicle or house system control panel. The Digital Multi Control panel (DMC) is designed to work with all Multi/Quattro. This includes stand alone, parallel and 2-3 phase configurations. Connecting the DMC to your system is simple, in most cases just connecting the DMC with an RJ45 cable is sufficient and no extra set-up handling is required. Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

AC Digital Frequency Meter Displays frequency from 40 to 90 Hertz 3 levels of display brightness Splashproof front WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Digital Battery Meter (MK-BM-1D) Monitors voltage level and "state of charge" of any 12-volt battery LCD display Compact frame for easy storage LED's indicate, 2/3, 1/3 or O "state of charge." WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Digital Multi Control 200/200A This panel is intended both for Multis and Quattros. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example. Setting range: up to 200 Amps. The brightness of the LEDs is automatically reduced during night time. Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

12 Volt DC 8 Position w/Digital Meter Features: 4 to 32 branch circuits with installed 15 Ampere circuit breakers Available with voltmeters, ammeters, and digital multimeters Includes 4205-Square Format Label Set Specifications: Positions: 8 Nominal Voltage: 12V DC Maximum Amperage*: 100A per bus Height: 10.75" (273.05mm) Width: 4.88" (123.95mm) Depth: 4.00" (101.6mm) Weight: 5.76lb (2.61kg) * Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application. Includes: (8) - 7403 - A-Series Flat Rocker Circuit Breaker - Single Pole 15A (1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL] (1) - 8248 - DC Digital Multi-Function Meter with Alarm (Meter) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12 Volt DC 12 Position w/Digital Meter Features: 4 to 32 branch circuits with installed 15 Ampere circuit breakers Available with voltmeters, ammeters, and digital multimeters Includes 4205-Square Format Label Set Specifications: Positions: 12 Nominal Voltage: 12V DC Maximum Amperage*: 100A per bus Height: 7.75" (196.85mm) Width: 9.25" (234.95mm) Depth: 4.00" (101.6mm) Weight: 5.99lb (2.72kg) * Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application. Includes: (12) - 7403 - A-Series Flat Rocker Circuit Breaker - Single Pole 15A (1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL] (1) - 8248 - DC Digital Multi-Function Meter with Alarm (Meter) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12 Volt DC Main + 19 Positions w/Digital Meter Features: 4 to 32 branch circuits with installed 15 Ampere circuit breakers Available with voltmeters, ammeters, and digital multimeters Includes 4205-Square Format Label Set Specifications: Positions: 19 Nominal Voltage: 12V DC Maximum Amperage*: 100A per bus Height: 7.75" (196.85mm) Width: 13.63" (346.2mm) Depth: 4.00" (101.6mm) Weight: 8.80lb (3.99kg) * Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application. Includes: (19) - 7403 - A-Series Flat Rocker Circuit Breaker - Single Pole 15A (1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL] (1) - 7549 - C-Series Flat Rocker Circuit Breaker - Single Pole 100A (Main) (1) - 8248 - DC Digital Multi-Function Meter with Alarm (Meter) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NavAlert NMEA Monitor & Alarm System NavAlert is Digital Yacht’s latest innovation and allows an alarm to be set for any parameter that’s available on the boat’s NMEA 2000 network. That could be navigation data such as depth, heading, or speed, as well as electrical data such as voltage and engine/generator data including temperature, pressure, tank levels, fuel flow, etc. It connects anywhere on the NMEA 2000 network and takes power from this connection, so installation is super simple. A local WiFi network is created by NavAlert, so setup is possible via any smartphone, tablet, or PC. Simply choose the parameter to monitor and set an alarm level. Alarms/Alerts Integrated into NavAlert is a custom alarm for anchor drift using an algorithm to calculate the optimum drift radius based on depth and the scope of the chain for reliable notifications. There’s also an anti-collision alarm based on CPA (closest point of approach) and TCPA (time to the closest point of approach) AIS data from a connected AIS. These alerts can also be monitored through the wireless interface with attractive graphical displays of current status. Alarms can also generate an SMS message, which can be relayed through Digital Yacht’s 4GXtream internet connectivity solution, allowing remote monitoring, which is great for feeling secure that the anchor is holding well when enjoying a lunch ashore. Alarms are independent of any alarms set on a plotter, allowing NavAlert to operate even without a primary multi-function display being powered up (an important feature for power-limited sailboats). Alerts can also be relayed to compatible multi-function devices (Garmin supports this function) for a pop-up data window indicating an alert and the ability to acknowledge it. *NavAlert is universal, using the industry standard NMEA 2000 data protocol, so it will integrate with all leading brands and systems. Operation The operation is simple. Simply search for the WiFi network that NavAlert creates and connect via a smartphone or tablet. Open a browser and connect to NavAlert, and users are presented with a clear graphical interface allowing easy setup, configuration, and viewing of the alerts and network data. NavAlert constantly monitors the whole network, so alert parameters can be set for any variable. Users can configure the NavAlert through its simple web interface. Just open a web browser, enter the NavAlert’s IP address, and users can change the network name and password, or even merge the WiFi to an existing WiFi network on board… So no complicated programming software or app is required. Features: Multiple parameters can be monitored Specifications: Universal NMEA 2000 alarm and monitoring solution Set a configurable audio and visual alarm for any parameter on the NMEA 2000 network – for instance: shallow depth, low fuel level, off course, engine temp, tank levels, low voltage, etc Relay the alert via the NMEA 2000 bus to a Garmin multi-function display to deliver a popup alarm window SMS alerting through Digital Yacht’s 4G Xtream system to a mobile – ideal for remote monitoring of the boat. Built-in unique anchor drift alarm Built-in AIS collision avoidance alarm What’s In the Box: 1m NMEA2000 drop cable WiFi antenna built-in

Round Voltage Meter - 6V-30V Compact size allows for installation in a variety of locations - the same round size as a standard 12V receptacle. For interior or fully protected locations only.  Specifications: Type: Round Digital Voltage Meter 4V-30V DC WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Digital Bilge Switch - 12/24V The 12/24V digital bilge switch activates your bilgepump automatically when water exceeds the acceptable level and deactivate when water has been removed. For a fully automatic removal of your bilge water connect a switch to your electrical bilge pump. Field sensing digital technology, fully sealed without any moving parts. Will not corrode and are not affected by oil or debris. Features: Type: Electronic Switch Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

MultiPlus-II 48/3000 35-50 120V The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 100A. PowerControl and PowerAssist - Boosting the Capacity of the Grid or a Generator  A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery.When the load reduces, the spare power is used to recharge the battery. Solar Energy: AC Power Available Even During a Grid Failure  The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. Two AC Outputs  The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Virtually Unlimited Power Thanks to Parallel, Split Phase and Three Phase Operation  Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/3000/35 units, for example, will provide 15 kW / 18 kVA output power with 210 Amps charging capacity. In addition to parallel connection, two units of the same model can be connected for a 240V split phase output, and three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected per phase. On-Site System Configuring, Monitoring and Control  Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel. Remote Configuring and Monitoring  Install a Color Control GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Specifications:  PowerControl & PowerAssist: Yes Transfer Switch: 50A Maximum AC Input Current: 50A Inverter Specifications: DC Input Voltage Range: 38 -66 V Output: Output Voltage 120 VAC ± 2% / Frequency 60 Hz ± 0,1% (1) Continuous Output Power at 25°C (3): 3000 VA Continuous Output Power at 25°C: 2400 W Continuous Output Power at 40°C: 2200 W Continuous Output Power at 65°C: 1700 W Peak Power: 5500 W Maximum Efficiency: 95% Zero Load Power: 11 W Zero Load Power in AES Mode: 7 W Zero Load Power in Search Mode: 2 W Charger Specifications: AC Input: Input Voltage Range 90-140 VAC / Input Frequency: 45 – 65 Hz Charge Voltage 'Absorption': 57,6 V Charge Voltage 'Float': 55,2 V Storage Mode: 52,8 V Maximum Battery Charge Current: 35 A Battery Temperature Sensor: Yes General Specifications: Auxiliary Output: 32 A External AC Current Sensor (optional): 100 A Programmable Relay: Yes Protection: a – g VE.Bus Communication Port: For parallel, split phase and three phase operation, remote monitoring and system integration General Purpose Com. Port: Yes, 2x Remote On-Off: Yes Operating Temperature Range: -40 to +65°C (-40 – 150 °F) (fan assisted cooling) Humidity (Non-Condensing): Max 95% Enclosure Specifications: Material & Color: Steel, blue RAL 5012 Protection Category: IP22 Battery-Connection: M8 bolts 120 V AC-Connection: Screw terminals 13 mm² (6 AWG) Weight: 19 kg / 42 lb. Dimensions (hxwxd): (mm) 572 x 277 x 147 / (inch) 22.5” x 10.9” x 5.8” Standards: Listings: UL1741 pending Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, CSA 22.2 107.1-16 Emission, Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 *Note: For a short period of time this product was called MultiGrid-II Please contact your dealer for any returns, repairs or support issues related to this product.