Hand Held DC System Tester At-a-glance testing of batteries, on-board charger, alternator / regulator output 6 Easy to read LED Indicators Compact lightweight design WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Twin Beam Hand Held Search Light - 12V Hella marine hand held search lights are vital tools for night sailing and landing maneuvers. Features: Two reflectors and two halogen bulbs on separate switches 55W bulb for close range. 100W bulb for long range (12V Version) 2 x 70W bulbs (24V Version) Trigger switch integrated into the grip allows morse code operation Extended front edge for protection of the glass lens Specifications: Housing Description: Shock and vibration resistant plastic, High gloss aluminium reflector Bulb: 1 x 12V / 55W H3 bulb included 1 x 12V / 100W H3 bulb included 2 x 24V / 70W H3 Mounting: Hand held. Deck mount base accessory available 8HG 998 519-001 Cable: Spiral cable with cigarette lighter plug Extended length 3.5m Degree of Protection: IP X6K Maximum Output: 12V / 155W or 24V / 140W

DC Charger Cable with Cigarette Lighter Adapter* Works with all Hand Helds except for the HX400 & HX400IS *May Require Charging Cradle Sold Separately

Quick Hand Held Transmitter Features Number of Keys - 2 Power Supply - 3 alkaline AAA batteries or rechargeable Nims Microcontroller-operated functions FSK modulation and carrier frequency 913Mhz Operating temperatures from -15°C to +70°C Possibility to control more receivers with one transmitter Two functions can be activated at the same time Floating Also working with rechargeable batteries Keyboard backlighting by means of LEDs

HandHeld Electric Horn - Blue The Hand Held Electric Horn features a weatherproof build and shock resistant construction. Meets all US Coast Guard requirements. Features: Solid state electronics Shock resistant construction Size: 7" high x 2.75" wide Meets US Coast Guard requirements Requires one 9-volt battery, not included

Panel Mounted DC Systems Monitor The Contour Digital Monitor offers a comprehensive range of functions to allow full monitoring of your batteries and charging systems. Monitors voltage on up to 3 battery banks, Amps for charge and discharge and capacity remaining in amp hours /percentage utilising peukerts exponent (house bank only) with the added function of a bilge monitor allowing 24 hour monitoring of your bilge pump. This meter is an important addition to modern battery management systems. Selectable legends allow full information to be shown on the screen to avoid confusion, unlike other digital meters available, which only show confusing digits. LCD screen draws 70 percent less than equivalent LED screens. Comes supplied with shunt, part No. LB-450-50. Installation kits are available in 5m and 10m lengths.

Handheld GPS Connector Cable Hand-held GPS Connector Cable connects a hand-held GPS unit to your Fishing System for easy viewability of track plotting information. All Matrix, 700 and 900 Series units are GPS capable. A user has three different GPS options with these products. They can either 1) plug in a GPS receiver into the accessory bus to get either GPS track plotting or chart plotting data depending on the unit's capabilities 2) plug in a GPS receiver along with the System link cable to allow two different units fishfinders to share one GPS receiver, or 3) plug in any of the four available GPS handheld cables that allow GPS track plotting data to be transferred from any handheld GPS that has NMEA output capability to the fish finder and displayed on the fishfinder screen. By using the handheld cables to connect the fishfinder to their handheld GPS unit the user can gain GPS trackplotting capability on the large display of their Matrix, 700 or 900 Series unit at a very low cost. The screens of handheld GPS units are small and often hard to view in extreme marine conditions. By using the handheld cables to transfer the GPS trackplotting data the user can view this information in an integrated form with their sonar information on large sunlight viewable display. *Bare wire NMEA connection cable WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MAXWELL AA710 WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTER All the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash. High level wireless transmission security - 2.4GHz ISM band Hand held controller displays rode count plus signal strength and battery level Console requires two AA batteries Ergonomic shape with wrist strap connector Water resistant to IP65 Rubber moulding for grip and non slip protection Console holder and protective cover Shockproof IEEE 802.15.4 compliant Kit includes 1 hand held remote control and 1 base station, 1 sensor and 1 magnet. Note: Two base stations can be combined and controlled by one remote to allow control of two windlasses. Plus, Plug and Play connectors, T-junctions and Gender Adaptors are also available. Contact your Maxwell Dealer.

Remote Holster for Wireless Handheld Remote Wireless Hand Held Remote Holster by Golight. This product is compatible with 30100 and 30300 wireless hand-held remote controls.

HX890 Floating 6 Watt Class H DSC Handheld VHF/GPS - Black Leading the way again! Some prominent new features include two scrambler systems built in, both a 4 code CVS2500A and a 32 code FVP-42 scrambler system ensure secure communications out on the water. Another new feature includes a built in FM Broacast band receiver, during times when radio communication is not necessary, relax with some music on the FM Radio broadcast bands. Other notable features include: Switchable daytime or nighttime mode, waypoint and route navigation, Group monitor function utilizing DSC Group position call. The new HX890 has also been redesigned with a new ergonomic case design, and has been rigorously tested to conform with the Militay Standard (MIL-STD-810F). The feature packed HX890 comes packaged with all the accesories including the rechargeable Li-Ion battery, Alkaline battery tray, 110V wall charger, 220V adapter, charging cradle, 12V charger, PC programming cable and belt lip with lanyard, and it's backed by our industry leading 3 year waterproof warranty.  Easy to Operate Icon/Menu System Forget about trying to memorize the owners manual. A brand new Easy to Operate Menu system makes this the most intuitive handheld on the market. DSC calling, position sharing, waypoint and route navigation, navigation to DSC distress call can all be performed with just a few simple steps. GM (Group Monitor) using DSC Group Position Call This new ADVANCED feature allows you to continuously track and display position information of up to 9 pre-selected vessels. Their position information is displayed on the compass page relative to your location on the display. Water Activated Emergency Strobe Light If the radio falls in the water an emergency strobe light is automatically activated, even when the unit is turned off!!! The strobe can be reconfigured to flash on and off, flash SOS, or set to stay on continuously. Integrated 66 Channnel WAAS GPS Receiver A highly sensitive 66 channel WAAS GPS receiver allows the HX890 to lock on to a position quickly and accurately. With position information displayed clearly on the display the user will be able to share position information using DSC and navigate to waypoints using the waypoint navigation feature of the radio. Oversized full dot matrix display The HX890 boasts one of the largest displays in a hand held VHF radio. Measuring 1.7" wide by 1.7" tall, or 2.3" diagonal. With a larger display, greater (dot matrix) resolution, and a super bright backlight there will be no mistaking the information displayed on the face of the radio day or night. Features: 6W transmit power output (Selectable 6/2/1W) 700mW Loud Audio and Noise Canceling Function for both TX/RX audio Rugged case construction conforms to Military Standard (MIL-STD-810F) Available in Navy Blue or Black Submersible IPX8 Construction and it floats DSC (Digital Selective Calling) ITU-R M.493 Class-H Operation W2.60’’ x H5.43’’ x D1.50’’ – Round Case Design provides excellent ergonomics Built-in Integrated 66 channel WAAS GPS Receiver 11-hour Operating Time with 1800mAh high capacity Li-ion battery Easy to Operate Menu System with a large (1.7’’ x 1.7’’) Full-dot matrix display Selectable Display Mode - Day & Night Mode Waypoint and Route navigation Group Monitor Function utilizing DSC Group Position Call MOB (Man over Board) feature Water Activated Emergency “WHITE” Strobe Light Two Scrambler Systems built-in – 4-code CVS2500A & 32-code FVP-42 Versatile Scanning operation (Dual Watch and Triple Watch) NOAA Weather Channels with Weather Alert FM Broadcast Radio Receiver Micro USB Data jack for PC programming 3 Year Waterproof Warranty

Wireless Hand Held Remote Optional wireless hand held remote compatable with all wireless lights in the Golight, RadioRay, Stryker, and Gobee models. Remote cannot be added to lights that came standard with only "wired" remotes.

Digital Mobile Charge40 - 12V to 24V Battery to Battery DC Input (Volts/Amps): 12 Volts/40 Amps DC Output (Volts/Amps): 24 Volts/20 Amps Digital Mobile Charge40 is a breakthrough in battery-to-battery, on-the-water charging technology. Simply connect to the engine crank battery and your house electronic battery, allowing for up to 40 Amps per hour to be transferred to your house battery bank. Protects your engine battery while charging and conditioning your house battery bank, using its all-digital C³ boost-mode-charging technology. Meets a boat's demand for on-the-water power and charging for 12 or 24 Volt DC systems, allowing for radar, lighting, live wells and other DC systems to operate while managing and charging batteries when running your engine. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

DC Color Systems Monitor (DCSM) - No Shunt DC Systems Monitor (DCSM) Designed and manufactured by BEP, these state of the art full colour monitors are made to meet the systems monitoring requirements of today's modern vessel and recreational vehicle. Complex and DC electrical installations on board are becoming more common place. Additionally the increase in tank monitoring requirements for fuel, fresh, grey and black water, accurate monitoring of these systems is essential. The DCSM display features clear, extra large type face. This allows for more detailed on-screen information and increased clarity. The screen has back lighting for easy night time viewing. Features: 8 Generic, user configurable inputs Programmable high/low audio /visual alarms for volts, amps and tank levels Backlit keypad and dimmable screen Can be panel or surface mounted 2.8" Colour QVGA LCD Input voltage 8-32VDC Dimensions: Width 90mm x Height 100mm Backlit keypad Monitors charge/discharge amps for two banks Monitors capacity remaining in A/h and % Monitors battery condition Monitors tank fluid level Monitors circuit status

1850 M2 Vessel Systems Monitor Performs comprehensive monitoring of four critical systems in one compact organic LED digital monitor. DC System Monitoring (up to two batteries) One input monitors the DC voltage, state-of-charge, current for one battery bank and another input monitors the voltage of an additional battery bank. Alarms include high and low voltage, high current, and low battery. AC System Monitoring The VSM monitors a single AC voltage, current, and frequency. Alarms include high and low voltage, high current, and high and low frequency. Bilge & Tank Monitoring The VSM has two inputs that can be configured as a bilge or tank monitor. When configured as a bilge input, monitoring functions include pump active, cycle count in the last 24-hours, average cycles in a typical 24-hour period, and total cycles. High alarms can be set for both the minutes of run time in the last hour as well as the number or cycle counts in the last 24-hours. When configured as a tank input, tank status can be represented in both capacity (gallons or liters) or as a percentage of capacity. Custom tank shapes can be auto-calibrated or programmed. Both high and low level alarms can be set for all tanks. Specifications: Meter: Bilge, Current, Tank, Voltage Frequency: 40-90Hz Current Range: 0-150A AC/-500 to 500A DC Operating Voltage: 40-300V AC/7-70V DC Minimum Current Draw: 18.8mA @ 12V, backlight off/35mA @ 12V, backlight off  Nominal Voltage: 120V AC, 230V AC, 12V DC, 24V DC, 48V DC

8413 - Metal AC/DC Panel with M2 Vessel Systems Monitor & 22 Circuit Breakers (15A)  Complete AC/DC panel with M2 Vessel Systems Monitor (VSM)  that provides monitoring of AC systems, DC systems, tanks, and bilges in one (1) compact OLED meter with NMEA 2000 connectivity. Features: ON indicating LEDs installed in all circuit positions Backlit label positions Circuit identification label sets included White toggle circuit breakers match existing traditional panels AC and DC buses installed, fully pre-wired, and ready for installation The panel is marked to comply with ABYC standards Red reverse polarity indicated LED Technical Specifications: Nominal Voltage - 120V AC and 12/24V DC Positions - 8 AC Positions + Main and 14 DC Positions + Main Meter - M2 Vessel Systems Monitor  Dimensions (H x W x D) - 9.25" x 15.77" x 3" (235 x 400.56 x 76.2mm) In the Box: 8413 Panel Labels Mounting hardware *Sold as Individual