2715 Cover for BusBar 2301 & 2303 Features: Weight: 0.08lb (0.04 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Cover for Busbar The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2709 Cover For DualBus for 2701 Specifications: Length: 4-3/16" Height: 7/8" Width: 2-1/2" Weight: 0.03lb WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2710 Cover for DualBus 2702 Specifications: Length: 6-3/8" Height: 7/8" Width: 2-3/8" Weight: 0.04lb WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Blue Sea Systems Products on Water or Land In addition to the marine industry, Blue Sea Systems products can be found on emergency vehicles, RVs, agricultural equipment, off-road vehicles, and other industries where rugged, dependable products are required. 7650 Add-A-Battery Add-a-Battery simplifies switching and automates charging for a complete two battery bank management solution.  The Dual Circuit Plus™ Battery Switch isolates engine and house circuits and combines battery banks for emergency starting. WeatherDeck 4376 Water Resistant Circuit Breaker Panel The 4376 WeatherDeck is a water resistant circuit breaker panel with 6 positions.  It is rated IP67 for temporary immersion for 30 minutes.  The 4376 is designed for flybridge and open cockpit applications. 5025 ST Blade Fuse Block with Cover The 5025 ST Blade Fuse Block with a clear, insulating cover has 6 circuits and a negative bus.  The 5025 can be used for 24-circuits and has a positive distribution bus with a #10-32 stud.  Models are available with or without a cover. 7748 SafetyHub 150 Fuse Block The SafetyHub 150 is an ignition protected fuse block with screw termination. It is safe for use on gasoline powered boats, reduces wiring connections, and consolidates up to ten fused circuits. It can be used for Main or Branch DC power distribution.

2300 150AMP Common BusBar 10 x #8-32 Screw Terminal with Cover Features: Stud design provides direct terminal to bus contact for low resistant connection Stainless steel studs and screws allow high torquing for excellent electrical contact Tin-plated copper bus for maximum conductivity and resistance to corrosion UL 94-VO rated (self extinguishing) base material resists high heat Press on insulating cover attaches to studs and allows unobstructed wire access Raised bus provides easy access to multiple wires on a single screw WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2307 Common 150A BusBar - (4) 1/4"-20 Studs w/Cover Features: The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Specifications: Maximum Voltage: 300V AC / 48V DC Number of Terminal Studs: 4 Terminal Type: 1/4" Stud Continuous Rating: 130A AC / 150A DC Base Material: Reinforced Polycarbonate Bus Material: Tin-Plated Copper CDA 110 / UNS 11000 Cover Material: Clear Polycarbonate Weight: 0.39lb (0.18 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2356 Water Resistant BusBar - 100 Amp with Cover Provides secure water-resistant bussing for harsh environments. The single side nesting design allows for wire entry from one side to maximize space. Features: Water-resistant design with standard ring or fork type terminals allows for simple wiring with standard tools. Accepts a wide range of wire sizes Includes 3 wire plugs to maintain water-resistant rating if less than 4 wires are used Nests with other Water-Resistant 100A Common BusBars and ST-Blade Water-Resistant Fuse Block for space saving wiring Ideal for positive distribution and for the collection of negative or AC ground circuits Insulating cover meets ABYC/USCG insulation requirements Tin-plated copper busses and fuse clips Includes four write-on circuit labels Small format standard and custom labels available Specifications: Cover: Yes Maximum Voltage: 300V AC/48V DC Continuous Rating: 100A AC/100A DC Bus Material: Tin-Plated Copper C11000 Mounting Holes: Accepts 1/4" (6mm) Screws Terminal Screw: 4 x #8-32 Terminal Stud: 1 x #10-32 Wire Size: (1) 8 AWG to 4 AWG - Input/(4) 16 AWG to 10 AWG - Load WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

5056100 - Water Resistant ST-Blade Fuse Block with Cover This Blue Sea fuse block provides water-resistant circuit protection for ATO/ATC fuses and circuit breakers in a compact footprint.  Now with wing screws for toolless access. Features: Water-resistant design with a standard ring or spade-type terminals Allows for simple wiring with standard tools Accepts a wide range of wire sizes Includes 3 wire plugs to maintain a water-resistant rating if less than 4 loads are required Accepts ATO and ATC fast acting blade fuses Accepts ATO/ATC-Style Low Profile Circuit Breakers Nests with other ST-Blade water-resistant fuse blocks and water-resistant 100A busbars to reduce wire 5056100 meets ABYC/USCG insulation requirements Tin-plated copper busses and fuse clips Includes four write-on circuit labels Spare fuse and fastener storage in cover Wing screws designed for tool-free installation of cover to meet ABYC compliance Technical Specifications: Cover - yes Maximum Voltage - 32V DC Bus Material - Tin-plated Copper Mounting Holes - Accepts 1/4" (6mm) screws Terminal Screws - 4 x # 8-32 with captive star lock washer Wire Size - Input - (1) 8 AWG to 4 AWG  Wire Size - Load - (4) 16 AWG to 10 AWG  In the Box: 5056100 Busbar Instruction Manual *Sold as an Individual

2302 150AMP Common BusBar 20 x 8-32 Screw Terminal Features: The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Specifications: Max Voltage: 300 V AC 48 V DC Number of Screws: 20 Number of Terminal Studs: 2 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Blue Sea Systems Blue Sea Systems is comprised of avid boaters with decades of experience in craft ranging from runabouts to sailboats, and years of blue water sailing experience. The engineering staff applies its previous experience designing test equipment, medical lasers, high amperage bus systems, circuit breakers, and marine systems to the Blue Sea Systems products they design. As an independent company, Blue Sea Systems is nimble, flexible, and responsive to customer needs and changes in the marine industry, engineering high quality marine electrical components for safety, reliability and performance.

PowerBar Common BusBar Terminal Studs: 2x3/8"-16 Provides compact high-ampere busing with 3/8" terminal studs WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

PowerBar Dual BusBar - Two 3/8"-16 Studs Provides compact high-ampere busing with 3/8" terminal studs Specifications: Maximum Amperage: 200A Maximum Voltage: 48V DC Number of Terminal Studs: 2 Terminal Type: 3/8"-16 Stud Bus Material: Tin-Plated Copper CDA 110/UNS11000 Weight: 0.32lb (0.15 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4029 AC Isolation Cover - 8 Position, 1 Column Features: Provides electrical insulation for exposed panel backs Provides mechanical protection for panel backs protruding into lockers Lightweight material is easily drilled for wire entrance and exit Meets ABYC requirements for panels with combined AC and DC Used on Blue Sea Systems toggle style circuit breaker panels only WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sea Rail Cover Blue Performance sea rail covers make hiking out or leaning on the rails more comfortable. Features: The outer cover of the Blue Performance Ripstop with Velcro closure over the full length Mid-layer of durable foam The inner core of a clear flexible plastic tube, spiral cut, to protect the foam mid-layer Specifications (L x W): Long: (ft.) 4.9 / (M) 1.5 Easy to use: Thread the wire of the rail through the inner core and foam mid-layer Fit the Ripstop cover over the foam mid-layer Fasten each end of the cover with a drawstring to prevent sliding *Sold as an Individual