|
2709 Cover For DualBus for 2701
Specifications:
Length: 4-3/16"
Height: 7/8"
Width: 2-1/2"
Weight: 0.03lb
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.04 |
|
|
2710 Cover for DualBus 2702
Specifications:
Length: 6-3/8"
Height: 7/8"
Width: 2-3/8"
Weight: 0.04lb
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.78 |
|
|
2715 Cover for BusBar 2301 & 2303
Features:
Weight: 0.08lb (0.04 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3.56 |
|
|
Cover for Busbar
The industry standard busbar for positive distribution
The industry standard busbar for the collection of negative or AC ground circuits
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
5.95 |
|
|
Blue Sea Systems Products on Water or Land
In addition to the marine industry, Blue Sea Systems products can be found on emergency vehicles, RVs, agricultural equipment, off-road vehicles, and other industries where rugged, dependable products are required.
7650 Add-A-Battery
Add-a-Battery simplifies switching and automates charging for a complete two battery bank management solution. The Dual Circuit Plus™ Battery Switch isolates engine and house circuits and combines battery banks for emergency starting.
WeatherDeck 4376 Water Resistant Circuit Breaker Panel
The 4376 WeatherDeck is a water resistant circuit breaker panel with 6 positions. It is rated IP67 for temporary immersion for 30 minutes. The 4376 is designed for flybridge and open cockpit applications.
5025 ST Blade Fuse Block with Cover
The 5025 ST Blade Fuse Block with a clear, insulating cover has 6 circuits and a negative bus. The 5025 can be used for 24-circuits and has a positive distribution bus with a #10-32 stud. Models are available with or without a cover.
7748 SafetyHub 150 Fuse Block
The SafetyHub 150 is an ignition protected fuse block with screw termination. It is safe for use on gasoline powered boats, reduces wiring connections, and consolidates up to ten fused circuits. It can be used for Main or Branch DC power distribution.
|
|
|
Blue Sea Systems
Blue Sea Systems is comprised of avid boaters with decades of experience in craft ranging from runabouts to sailboats, and years of blue water sailing experience. The engineering staff applies its previous experience designing test equipment, medical lasers, high amperage bus systems, circuit breakers, and marine systems to the Blue Sea Systems products they design. As an independent company, Blue Sea Systems is nimble, flexible, and responsive to customer needs and changes in the marine industry, engineering high quality marine electrical components for safety, reliability and performance.
|
|
|
4029 AC Isolation Cover - 8 Position, 1 Column
Features:
Provides electrical insulation for exposed panel backs
Provides mechanical protection for panel backs protruding into lockers
Lightweight material is easily drilled for wire entrance and exit
Meets ABYC requirements for panels with combined AC and DC
Used on Blue Sea Systems toggle style circuit breaker panels only
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
114.96 |
|
|
Sea Rail Cover
Blue Performance sea rail covers make hiking out or leaning on the rails more comfortable.
Features:
The outer cover of the Blue Performance Ripstop with Velcro closure over the full length
Mid-layer of durable foam
The inner core of a clear flexible plastic tube, spiral cut, to protect the foam mid-layer
Specifications (L x W):
Long: (ft.) 4.9 / (M) 1.5
Easy to use:
Thread the wire of the rail through the inner core and foam mid-layer
Fit the Ripstop cover over the foam mid-layer
Fasten each end of the cover with a drawstring to prevent sliding
*Sold as an Individual
|
49.03 |
|
|
ST Blade Fuse Block With Cover - 6 Circuit without Negative Bus
Part# 5035
Can be used for 24-hour circuits
Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems' Small Format Labels for circuit identification
Fuse blocks with covers include 20 write-on circuit labels
Tin-plated copper buses and fuse clips
Accepts ring or spade type terminals
Accepts ATO® and ATC® fast acting blade fuses
Fuses sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.36 |
|
|
MIDI or AMI Safety Fuse Block
Ignition protected for installation aboard gasoline or diesel powered boats
Sealed cover protects fuses from the harsh marine environment
Insulating cover satisfies ABYC/USCG insulation requirements
Cover breakouts allow wire access in any direction
200A maximum with 2/0 cable
Accepts Blue Sea Systems Square Format standard or custom label
Fuses sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
28.56 |
|
|
MEGA or AMG Fuse Safety Block
Ignition protected for installation aboard gasoline or diesel powered boats
Sealed cover protects fuses from the harsh marine environment
Insulating cover satisfies ABYC/USCG insulation requirements
Cover breakouts allow wire access in any direction
300A maximum with 2/0 cable
Accepts Blue Sea Systems Square Format standard or custom label
Fuses sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
28.56 |
|
|
Director's Chair with Blue Seat Covers - Teak
Features:
Directors Chair with Blue Seat Covers
Solid brass hardware
18" high from floor to seat
100% Acrylic Sunbrella seat covers
Folds for easy storage
Oiled finish
|
382.55 |
|
|
Captain's Chair with Blue Seat Covers - Teak
Features:
Captain's chair with Blue seat covers
Solid brass hardware
100% Acrylic Sunbrella seat covers
30" high from floor to seat
Folds for easy storage
Oiled finish
|
538.93 |
|
|
Elite Fender Cover for F-3 Fenders - Blue
Fender covers should be as tough as the fenders they protect. That was our criteria used in developing the Elite Fender Cover series.
Polyform uses a premium-grade polyester yarn that is resistant to abrasion and UV exposure. Additionally, it resists water absorption better than other materials, keeping fenders manageably light when wet. The cover is woven on a special knitting machine that produces a seamless tube, meaning no seams to split. This method allows for a heavier, stronger yarn content resulting in a great fender cover that is built to last for many years, not just a season.
Compatible With:
F-3 Fenders
Features:
Hand-crafted with heavy-duty polyester fabric for durability
Sun resistant, abrasion-resistant and water-resistant
Washable
Custom fit for a tailored look
A tough 1/4" line drawstring closure
Quick and easy installation
*Sold as an Individual
|
52.55 |
|
|
5056100 - Water Resistant ST-Blade Fuse Block with Cover
This Blue Sea fuse block provides water-resistant circuit protection for ATO/ATC fuses and circuit breakers in a compact footprint. Now with wing screws for toolless access.
Features:
Water-resistant design with a standard ring or spade-type terminals
Allows for simple wiring with standard tools
Accepts a wide range of wire sizes
Includes 3 wire plugs to maintain a water-resistant rating if less than 4 loads are required
Accepts ATO and ATC fast acting blade fuses
Accepts ATO/ATC-Style Low Profile Circuit Breakers
Nests with other ST-Blade water-resistant fuse blocks and water-resistant 100A busbars to reduce wire
5056100 meets ABYC/USCG insulation requirements
Tin-plated copper busses and fuse clips
Includes four write-on circuit labels
Spare fuse and fastener storage in cover
Wing screws designed for tool-free installation of cover to meet ABYC compliance
Technical Specifications:
Cover - yes
Maximum Voltage - 32V DC
Bus Material - Tin-plated Copper
Mounting Holes - Accepts 1/4" (6mm) screws
Terminal Screws - 4 x # 8-32 with captive star lock washer
Wire Size - Input - (1) 8 AWG to 4 AWG
Wire Size - Load - (4) 16 AWG to 10 AWG
In the Box:
5056100 Busbar
Instruction Manual
*Sold as an Individual
|
35.99 |
|