|
Link-6S Class D DSC VHF Radio - Gray - NMEA 0183
Communicate clearly with this dependable Class D DSC Approved marine VHF radio featuring an integrated GPS antenna, a four-button fist microphone, intuitive rotary and keypad controls and a front-mountable mechanical design for easy installation.
Features:
Integrated GPS Antenna
4-Button Fist Microphone
Intuitive Rotary
Keypad Controls
Front-Mountable Mechanical Design for Easy Installation
|
331.20 |
|
|
Ray90 VHF Radio & AIS700 Bundle
Ray90 VHF Radio
Raymarine’s fixed mount Ray90 modular VHF radio brings multi-station communications to a whole new level of power, performance, and flexibility. The Ray90 is a black-box design with a transceiver that hides out of sight while the ergonomic RayMic handset and remote speaker provide full control of the radio with crystal clear audio.
Features:
Black box, multi-station capable VHF radio
Wireless handset and active speaker available
Wired handset and passive speaker included
Expandable to 2 handsets
Built-in loudhailer and fog signal generator
Optional external GPS
Simple NMEA2000 and NMEA0183 Networking
Ray90 is equipped with a powerful 25-watt transmitter and commercial grade electronics for long life and superior performance. Channel scanning, dual-watch, tri-watch and weather alert are standard. Class D Digital Selective Calling radio and integrated GPS makes setting up the advanced safety and calling features easy. Simply input your vessel’s MMSI number during setup and you’re ready to go. For GPS operation the optional GA150 passive GPS antenna is required.
Position Tracking
Use Ray90’s position tracking feature to keep tabs on up to 5 nearby DSC equipped vessels. Their positions are automatically shared with your Raymarine MFD. Keep an eye on other boats in your cruising party, monitor vessels of interest, or manage your local fleet. In Europe the Ray90 supports the ATIS system on navigable inland waterways.
Loudhailer
Ray90’s built-in loudhailer will make you heard on-deck and across the harbour. Connect an optional hailing horn and make your presence known with 30-watts of audio output, plus 2-way talkback. When things get foggy, the loudhailer can also be set to automatically sound required fog signals for power and sailing vessels underway and at anchor.
Waterproof & Ruggedized
Ray90’s transceiver unit is cast in solid aluminum for shock and vibration resistance and maximum heat dissipation. RayMic handsets feature super-bright backlighting for easy viewing in all conditions and oversized keys provide a sure grip with easy access to commonly used functions.
Expand Your System
The Ray90 system includes 1 RayMic wired handset and a passive speaker kit. Expand your system with an additional RayMic handset and remote speaker. For noisy environments choose the optional active remote speaker. No matter how small or how large your vessel is, the Ray90 all the power and performance you need for essential communications on the water.
In the Box:
Ray90 / Ray91 VHF DSC Radio (including fitted power and data cable)
Raymic handset cradle
Raymic handset
Raymic handset adaptor cable (12 pin female to 12 pin male with RCA Audio)
Passive speaker
Passive speaker mounting gasket
Passive speaker mounting screws x 4
Documentation
VHF radio mounting screws x 4
Handset cradle mounting screws x 4
DeviceNet to SeaTalkng® adaptor
AIS700 Class B AIS Transceiver with Antenna Splitter
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**
Click here to download form.
The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. AIS is an international marine navigation safety system that allows participating vessels to silently exchange key navigation information including vessel name, identification, course, speed and more. AIS contacts can be displayed on Raymarine multifunction displays, chartplotters, radar displays and select instruments. As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems.
The AIS700 is engineered using the very latest SO-TDMA (Self Organized Time Division Multiple Access) networking technology which allows it to perform faster and at longer ranges than d speed over previous generation AIS products. For ease-of-installation, the AIS700 has a built in VHF-band antenna splitter which allows it to share a single antenna with your current VHF radio. AIS700 also has its own internal, dedicated 72-channel GPS receiver with external antenna as required by international standards.
AIS700 also supports both hardware and software-enabled Silent Mode. This allows you to temporarily restrict broadcasting your vessels own data, while continuing to receive updates from surrounding traffic. Silent Mode can be particularly useful when transiting waters where extra security is a concern, or even in competitive tournament scenarios when you might want to prevent other from finding out the location of the hot bite. Normal AIS safety broadcasts can be easily reinstated with a few simple touches of the AIS controls in your Raymarine MFD, or with the flip of a switch for hardware-silenced systems.
The AIS700 is super-compact for easy mounting inside your helm, in a service locker, or other out-of-the-way location. It can connect to your other onboard electronics using the latest NMEA2000 networking. AIS700 also has a built-in NMEA0183 multiplexer to assist in connecting it to older MFD’s and VHF radio systems. AIS700 also has a built-in USB 2.0 connection that can be used to tie the transceiver into a computer or laptop running AIS compatible navigation software. AIS700 has a Secure Digital (SD) memory slot that can be fitted with an owner-suppled flash memory card for continuous recording of the AIS data stream.
Features:
Full transmit and receive AIS for enhanced situational awareness and safety
Latest SO-TDMA networking for longer range and faster performance
Built-in antenna splitter simplifies installation with existing VHF radio antenna
NMEA2000, NMEA0183, PC and SeaTalkng Compatible
Software or hardware switchable Silent Mode for enhanced security when needed
In the Box:
AIS700 Class B AIS Transceiver with built-in VHF antenna splitter
GNSS (GPS) Antenna, gasket and pole mount kit
Power and data cable (2 meters)
VHF Radio antenna interconnect cable (1 meter)
DeviceNet to SeaTalk NG Cable (1 meter)
Mounting Hardware
Pro-AIS Programming Software CD-ROM
Documentation kit
|
2399.99 |
|
|
M330 VHF Radio Compact with GPS - Black
Top Performance Ultra Compact VHF
Ultra Compact Body, Flexible Installation
The IC-M330E/GE has a palm-sized compact body (W×H×D; 156.5 × 66.5 × 110.1 mm; 6.2 × 2.6 × 4.3 in). The radio can be installed in limited space.
Speaker Delivers Dynamic, Clear Audio
A speaker design delivers dynamic and clear sound over a wide bass and treble range. The IC-M330/G provides a distortion-free clear audio even at full volume.
Built-in Class D DSC
The radio monitors CH 70 continuously, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.Class Leading Receiver PerformanceThe radio provides reliable communication in RF busy environment like a marina. (Selectivity and IMD: more than 70 dB)
Intuitive Operation with Icom Marine User Interface
A combination of the directional keypad and soft keys provides simple, smooth operation. Most used functions are assigned to soft keys for quick one push function access.
GPS Receiver Built-in (IC-M330G)
Supplied GPS antenna A built-in GPS receiver provides your location, bearing and speed by using information from GPS, GLONASS and SBAS. The acquired position information can be used for DSC calls.
Made in Japan Quality and Reliability
All Icom products are tested to pass rigorous in-house tests as well as environmental tests at the Wakayama Icom plant before shipping. Our world-leading products and quality is tradition.
Features:
IPX7 waterproof (1m depth of water for 30 minutes)
AquaQuake™ prevents audio degradation from a water-logged speaker
Common NMEA interface for external GPS/NAV connection
MA-500TR Class B AIS transponder compatible
Tag scan and favorite channel functions
Dual/tri-watch function for monitoring CH16 and/or call channel
Priority scan function
Display and keypad backlighting
External speaker connection
3-digit or 4-digit channel display selectable
Supplied hand microphone, HM-235B/W with channel up/down keys and a CH16/Call channel key
|
214.99 |
|
|
M330 VHF Radio Compact with GPS - White
Top Performance Ultra Compact VHF
Ultra-Compact Body, Flexible Installation
The IC-M330E/GE has a palm-sized compact body (W×H×D; 156.5 × 66.5 × 110.1 mm; 6.2 × 2.6 × 4.3 in). The radio can be installed in a limited space.
Speaker Delivers Dynamic, Clear Audio
A speaker design delivers dynamic and clear sound over a wide bass and treble range. The IC-M330/G provides distortion-free clear audio even at full volume.
Built-in Class D DSC
The radio monitors CH 70 continuously, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request, and DSC test calls. Class-Leading Receiver PerformanceThe radio provides reliable communication in RF busy environment like a marina. (Selectivity and IMD: more than 70 dB)
Intuitive Operation with Icom Marine User Interface
A combination of the directional keypad and soft keys provides a simple, smooth operation. Most used functions are assigned to soft keys for quick one push function access.
GPS Receiver Built-in (IC-M330G)
Supplied GPS antenna A built-in GPS receiver provides your location, bearing, and speed by using information from GPS, GLONASS, and SBAS. The acquired position information can be used for DSC calls.
Made in Japan Quality and Reliability
All Icom products are tested to pass rigorous in-house tests as well as environmental tests at the Wakayama Icom plant before shipping. Our world-leading products and quality is tradition.
Features:
IPX7 waterproof (1m depth of water for 30 minutes)
AquaQuake™ prevents audio degradation from a water-logged speaker
Common NMEA interface for external GPS/NAV connection
MA-500TR Class B AIS transponder compatible
Tag scan and favorite channel functions
Dual/tri-watch function for monitoring CH16 and/or call channel
Priority scan function
Display and keypad backlighting
External speaker connection
3-digit or 4-digit channel display selectable
Supplied hand microphone, HM-235B/W with channel up/down keys and a CH16/Call channel key
|
214.99 |
|
|
RS100 Black Box VHF Radio with Handset & Speaker
Navigate safely with the Simrad RS100 VHF marine radio. Stay connected from anywhere on your vessel with up to eight handsets (four wired and four wireless) and four external speakers.
A modular system to fit any boat
The RS100 is a modular VHF system that's expandable and customizable to suit any boat and any on-water communication needs. The standard package includes one wired handset and one external speaker. This setup is expandable up to eight handsets (four wired and four wireless) and four external speakers - ideal for use as an on-board intercom with Simrad HS40 wireless or HS100 wired handsets. The wireless handsets duplicate the radio display and controls on easy-to-read screens viewable under all lighting conditions, even bright sunlight. All primary functions are accessible from the handset with channel scan and favorites, alphanumeric keypad, clear audio, handset station naming and 60-second audio rewind.
Designed for Clear Communication
This Class D DSC approved radio can make and receive DSC distress signals including your current position, and supports direct calling to other DSC-equipped radios. A dual-channel watch lets you monitor the current channel and emergency channel 16 (in the USA, tri-channel watch monitors the current channel, emergency channel 16, and calling channel 9). A record and replay feature helps to ensure you never miss an important call. The system includes one external speaker with additional outputs for up to four speakers and one optional loudhailer/foghorn.
Features:
Class D DSC approved VHF radio
Integrated GPS receiver
Connect up to four wireless and four wired handsets
Add an optional loudhailer and up to four external speakers
NMEA 0183® and NMEA 2000® connectivity
60-second audio rewind
Configurable external speakers with volume offsetting
Handset backlight settings can be grouped with NMEA 2000® backlight groups so MFD’s and VHF Radios can have backlight controlled together
Track Buddy – track up to five “buddies” using their VHF MMSI
|
1198.80 |
|
|
RS100-B Black Box VHF Radio with Class B AIS & GPS Antenna
Navigate safely with the Simrad RS100-B VHF marine radio - integrated with a Class-B AIS transceiver and GPS. Stay connected from anywhere on your vessel with up to eight handsets (four wired and four wireless) and four external speakers. An external GPS-500 delivers advanced AIS functionality.
Complete visibility with integrated AIS
The RS100-B system features a Class-B AIS receiver and transmitter, so not only is your boat's position identifiable to nearby AIS-enabled vessels but theirs are also visible to you. The integrated AIS receiver is a valuable aid to help avoid collisions in crowded harbours and waterways. It monitors the location of all nearby AIS-enabled vessels, providing real-time information in any weather condition, night and day. AIS information can be viewed directly on the radio's screen or via a compatible multifunction device, as an overlay on a chart or radar screen.
A modular system to fit any boat
The RS100-B is a modular VHF system that's expandable and customisable to suit any boat and any on-water communication needs. The standard package includes one wired handset and one external speaker. This setup is expandable up to eight handsets (four wired and four wireless) and four external speakers - ideal for use as an on-board intercom with Simrad HS40 wireless or HS100 wired handsets. The wireless handsets duplicate the radio display and controls on easy-to-read screens viewable under all lighting conditions, even bright sunlight. All primary functions are accessible from the handset with channel scan and favourites, alphanumeric keypad, clear audio, handset station naming and 60-second audio rewind.
Features:
Integrated Class-B AIS transmitter and receiver
Bundled with dedicated GPS receiver, GPS-500 for AIS transmission
Class D DSC approved VHF radio
Connect up to four wireless and four wired handsets
Add an optional loudhailer and up to four external speakers
NMEA 0183® and NMEA 2000® connectivity
60-second audio rewind
Configurable external speakers with volume offsetting
Handset backlight settings can be grouped with NMEA 2000® backlight groups so MFD’s and VHF Radios can have backlight controlled together
Track Buddy – track up to five “buddies” using their VHF MMSI
|
2158.80 |
|
|
VHF 315 Marine Radio
Enjoy Reliable Communication
Reliable 25-watt VHF Class D DSC marine radio
Includes GHS™ 11 handset and new active speaker to use as intercom between up to 3 stations
Built-in GPS receiver (requires external antenna)
NMEA 2000® connectivity for easy integration with compatible chartplotters and multifunction displays
Preprogrammed with U.S., Canadian and international marine channels plus 10 NOAA weather channels
The 25-watt VHF 315 marine radio with Class D DSC is a modular communication solution. It provides the security of reliable communication and full NOAA weather alerts on the water by meeting the latest industry standards. It’s easy to use and integrates seamlessly into the Garmin onboard system. It has a built-in GPS receiver with connector for required external antenna. VHF 315 includes a GHS 11 handset and new active speaker to use as an intercom between up to 3 stations. It’s also equipped with a two-way 30-watt hailer system for communication with other boats or deckhands. NMEA 2000 connectivity enables easy integration with compatible chartplotters, multifunction displays and convenient software updates. Simplified handset connectors and an uncomplicated, easy-to-use interface allow you to get your radio set up quickly, so you can get back out on the water and start communicating.
What's Included?
VHF 315 marine radio
GHS 11
Cradle (for GHS 11)
Active speaker
Power cable
Deck cable (10 meters)
Microphone hanger
Mounting hardware
Documentation
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
719.99 |
|
|
M510 EVO VHF with AIS & NMEA 2000
The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances the experience at sea even more.
Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, and sailing, as well as in rescue and public safety.
*AIS receiver is integrated in the M510 PLUS EVO 51
NMEA 2000™ and Loud 25 W Two-Way Hailer/20 W RX Hailer Now Built-in
The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, AIS information*, DSC call, and radio channel data to other equipment.
When connected to the optional SP-37 speaker horn, users can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets users listen to the radio traffic on the deck or tower through the hailer speaker. Users can also sound foghorn patterns from the hailer speaker.
Radio Control & Intercom Through Smart Devices
Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature. Users can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.
Award Winning Sleek Design - iF DESIGN AWARD 2022
The IC-M510 series (including the IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard.
Wide Viewing Angle Color TFT LCD
The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing-angle display has high-resolution characters and function icons. Hold down the DISP key to switch the night mode screen, ensuring good readability in low-light conditions.
Built-in Class D DSC, “Distress” Button Can be a Lifesaver in an Emergency Situation
With just a press of the “DISTRESS” button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security.
15 W Speaker Provides Clear and Loud Audio
The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.
Integrated AIS Receiver*
With its integrated AIS receiver*1 or external NMEA sentence*2, the IC-M510 can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen.
*1 AIS receiver is not included, depending on the transceiver version. *2 Optional MA-510TR or third-party AIS receiver/transponder.
Simplified Navigation Function
The navigation function guides users to a specified waypoint or AIS target. Users can assign up to 100 destinations as waypoints, such as favorite fishing spots or starting positions for yacht races.
Combined with MA-510TR Supports Safer Navigation
When connected to the optional MA-510TR Class B AIS transponder, users can send and receive real-time information about vessels, including identity, position, speed, course, and other relevant data, displayed on the screen. Making a vessel's position known to others helps prevent collisions and accidents, especially at night, in rough weather, or on crowded shipping routes. The MA-510TR enhances safety during navigation at sea.
Active Noise Canceling Technology
The Active Noise Cancelling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment.
Other Features:
Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna)
IP68 advanced waterproofing (1 m depth of water for 60 minutes)
Voice Scrambler with optional UT-112A
AquaQuake™ prevents audio degradation from a water-logged speaker
Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement
External speaker connection
Optional HM-195 CommandMic™ are available
Supports 4-digit channels
Supplied waterproof flash mount gasket for panel mount
Specifications:
General Specifications:
Frequency range: TX: 156.025 157.425 MHz; RX: 156.050 163.275 MHz; DSC: 156.525 MHz; AIS1, 2*1: 161.975, 162.025 MHz
Usable Channels: USA, CAN, INT, WX channels
Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1
Power Supply Requirement: 13.8 V DC (11.7 15.9 V DC)
Current Drain (at 13.8 V DC): TX 25 W output: 5.0 A; RX Max. audio: 1.6 A, 2.0 A (with HM-195), 4.0 A (with extSP), 7.3 A (with ext SP, RX hailer, and HM-195)
Operating Temperature Range: –20 degrees C +60 degrees C, –4 degrees F +140 degrees F
Antenna Impedance: 50 Ω
Dimensions (W x X x D): 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in
Weight (approx.): 730 g, 1.6 lb (not including microphone)
Transmitter Specifications:
Output Power (at 13.8 V DC): 25 W, 1W
Max. Frequency Deviation: ±5 kHz
Frequency Tolerance: ±0.5 kHz
Spurious Emissions: Less than −70 dBc (at 25 W)
Residual Modulation: More than 40 dB
Adjacent Channel Power: More than 70 dB
Receiver Specifications:
Sensitivity (at 12 dB SINAD): –10 dBμ typical
DSC (1% BER): –1 dBμ emf typical
Adjacent Channel Selectivity: More than 75 dB
DSC (1% BER): More than 73 dBμ emf
Spurious Response: More than 75 dB
DSC (1% BER): More than 73 dBμ emf
Intermodulation: More than 75 dB
DSC (1% BER): More than 68 dBμ emf
Hum & Noise: More than 40 dB
Audio Output Power: More than 15 W (external speaker)
Audio Output Power (at 10% distortion with 4 Ω): 20 W typical (RX Hailer), 25 W typical (Hailer)
Wireless LAN Specifications:
Wireless LAN standard: IEEE802.11 b/g/n
Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES)
Channels: 1 to 13 (2.4 GHz band)*2
Output Power: Less than 10 mW/MHz
Supplied Accessories:
Speaker microphone, HM-205RB
Microphone hanger
DC power cable
Mounting bracket kit
Flush mount gasket
*1 Only for the Integrated AIS version. *2 May differ depending on the country of use.
|
1139.94 |
|
|
V100-B Black Box VHF Radio with Built-In AIS Transmitter & Receiver & External GP-500 GPS Antenna
Stay safer on the water with the B & G V100-B VHF marine radio featuring a built-in GPS and Class B AIS transceiver, which allows you to see and be seen by AIS-equipped vessels. Stay connected from anywhere on board with up to 8 handsets (4 wired and 4 wireless) and 4 external speakers.
Stay connected from anywhere on board with up to 8 handsets (4 wired and 4 wireless) and 4 external speakers.
The system is comprised of a VHF Radio Black box (NRS-2), a handset, and a speaker. Add additional speakers or wireless handsets with charging stations as you need, for complete freedom onboard, and meaning there is no need for a handheld VHF.
The radio systems replace the V90-B VHF and have been developed to allow wider integration possibilities through NMEA 2000® and 0183 while featuring improved user interfaces and design styles aligned to the new displays of B & G.
V100-B Features:
Integrated Class B AIS transmitter & receiver
Bundled with a dedicated GPS receiver, GPS-500 for AIS transmission.
Class D DSC-approved VHF radio
Integrated GPS receiver
Connect up to 4 wireless and 4 wired handsets
Add an optional loudhailer and up to 4 external speakers
NMEA 0183 and NMEA 2000® connectivity
60-second audio rewind
Configurable external speakers with volume offsetting
Handset backlight settings can be grouped with NMEA 2000® backlight groups so MFDs and VHF Radios can have backlight controlled together
Track Buddy – track up to 5 “buddies” using their VHF MMSI
In the Box:
000-15642-001 NRS-2 Black Box only
000-15650-001 H100 Handset
000-15651-001 SP100 - Speaker for Simrad and B & G Systems
000-13613-001 GPS-500
See & Be Seen with Integrated AIS*
The V100-B includes a Class B AIS transceiver, which not only receives AIS targets but also transmits your boat’s position to nearby AIS-equipped vessels. This helps other mariners to spot your boat through any conditions, day or night. A built-in AIS receiver monitors the position of other AIS-equipped vessels, helping you to proactively avoid collisions in crowded harbors and waterways. AIS information can be viewed on the radio’s built-in screen or overlaid on your chart or radar screen through a compatible multifunction display.
*V-100 has a receiver only
Expandable with Additional Handsets & Speakers
V100 series modular VHF radios come with 1 wired handset and 1 speaker, but you can add up to 4 more B & G H60 wireless and 3 more H100 wired handsets along with up to 3 additional external speakers, doubling your radio as an on-board intercom. Each wireless handset with inductive charging, duplicates your radio’s display and controls on a large, easy-to-read screen, viewable in all lights, with an intuitive user interface. Access all key functions with channel scan and favorites, an alphanumeric keypad, clear audio, handset station naming, and 60-second audio rewind.
|
2158.80 |
|
|
M330 VHF Compact Radio - Black
Top Performance Ultra Compact VHF
Ultra Compact Body, Flexible Installation
The IC-M330/G has a palm-sized compact body (W×H×D; 156.5 × 66.5 × 110.1 mm; 6.2 × 2.6 × 4.3 in). The radio can be installed in limited space.
Speaker Delivers Dynamic, Clear Audio
A speaker design delivers dynamic and clear sound over a wide bass and treble range. The IC-M330/G provides a distortion-free clear audio even at full volume.
Built-in Class D DSC
The radio monitors CH 70 continuously, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.Class Leading Receiver PerformanceThe radio provides reliable communication in RF busy environment like a marina. (Selectivity and IMD: more than 70 dB)
Intuitive Operation with Icom Marine User Interface
A combination of the directional keypad and soft keys provides simple, smooth operation. Most used functions are assigned to soft keys for quick one push function access.
Made in Japan Quality and Reliability
All Icom products are tested to pass rigorous in-house tests as well as environmental tests at the Wakayama Icom plant before shipping. Our world-leading products and quality is tradition.
Features:
IPX7 submersible (1 m depth of water for 30 minutes)
AquaQuake™ prevents audio degradation from a water-logged speaker
Common NMEA interface for external GPS/NAV connection
MA-500TR Class B AIS transponder compatible
Tag scan and favorite channel functions
Dual/tri-watch function for monitoring CH16 and/or call channel
Priority scan function
Display and keypad backlighting
External speaker connection
Weather channel with weather alert
Supplied hand microphone, HM-235B/W, with channel up/down keys and a CH16/Call channel key
3-digit or 4-digit channel display selectable
Supplied Accessories
HM-235B/W hand microphone
DC power cable
Mounting bracket kit
GPS antenna (5 m; 16.4 ft cable) *Only for the IC-M330G
Supplied Accessories:
HM-235B/W hand microphone
DC power cable
Mounting bracket kit
GPS antenna (5m; 16.4' cable) *Only for the IC-M330G
|
197.65 |
|
|
M330 VHF Compact Radio - White
Top Performance Ultra Compact VHF
Ultra Compact Body, Flexible Installation
The IC-M330/G has a palm-sized compact body (W×H×D; 156.5 × 66.5 × 110.1 mm; 6.2 × 2.6 × 4.3 in). The radio can be installed in limited space.
Speaker Delivers Dynamic, Clear Audio
A speaker design delivers dynamic and clear sound over a wide bass and treble range. The IC-M330/G provides a distortion-free clear audio even at full volume.
Built-in Class D DSC
The radio monitors CH 70 continuously, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.Class Leading Receiver PerformanceThe radio provides reliable communication in RF busy environment like a marina. (Selectivity and IMD: more than 70 dB)
Intuitive Operation with Icom Marine User Interface
A combination of the directional keypad and soft keys provides simple, smooth operation. Most used functions are assigned to soft keys for quick one push function access.
Made in Japan Quality and Reliability
All Icom products are tested to pass rigorous in-house tests as well as environmental tests at the Wakayama Icom plant before shipping. Our world-leading products and quality is tradition.
Features:
IPX7 submersible (1 m depth of water for 30 minutes)
AquaQuake™ prevents audio degradation from a water-logged speaker
Common NMEA interface for external GPS/NAV connection
MA-500TR Class B AIS transponder compatible
Tag scan and favorite channel functions
Dual/tri-watch function for monitoring CH16 and/or call channel
Priority scan function
Display and keypad backlighting
External speaker connection
Weather channel with weather alert
Supplied hand microphone, HM-235B/W, with channel up/down keys and a CH16/Call channel key
3-digit or 4-digit channel display selectable
Supplied Accessories
HM-235B/W hand microphone
DC power cable
Mounting bracket kit
GPS antenna (5 m; 16.4 ft cable) *Only for the IC-M330G
Supplied Accessories:
HM-235B/W hand microphone
DC power cable
Mounting bracket kit
GPS antenna (5m; 16.4' cable) *Only for the IC-M330G
|
197.65 |
|
|
FM4800 VHF Radio with AIS, GPS & Loudhailer
Marine VHF Radiotelephone with Class D DSC, GPS Receiver, AIS Receiver and Simplified Loud Hailer
The FM4800 is a marine VHF radiotelephone with built-in Class D DSC, GPS Receiver, AIS Receiver, and Simplified Loud Hailer with intercom. Its compact housing enables it to be installed in a variety of craft, even vessels where space is limited, such as center-console boats. The unit can be mounted on its lightweight bracket, either desktop or overhead, or it can be flush mounted. The FM4800 shares a common appearance with other Furuno equipment, such as NavNet TZtouch2, NavPilot 711C, and the FI70 Instrument series, offering an integrated appearance to any helm.
With its built-in GPS receiver, the FM4800 does not require an external GPS source to enable its DSC functionality. The unit can be used as a backup source of GPS positioning for other onboard electronics. Its built-in AIS Receiver can be used to overlay AIS targets with networked GPS Plotters or MFD's, such as NavNet TZtouch, NavNet TZtouch2, or GP1871F/GP1971F combo units.
Built-In GPS, DSC & AIS
An existing GPS source can be connected to the FM4800, and it can share its own GPS, DSC and AIS information via NMEA0183 or NMEA2000. When connected via NMEA2000 to any NavNet TZtouch2 MFD, DSC calling can be initiated directly from the TZtouch2 MFD by simply tapping on the AIS/DSC target and selecting [DSC Call]. Additionally, when MOB (Man Overboard) is activated on a TZtouch2 MFD, the FM4800 enters a special mode where you can initiate a distress call by simply pushing the rotary knob.
Loud Hailer, Intercom & Listen Back Features
The FM4800 can operate as a simplified Loud Hailer with intercom, featuring 8 patterns of alert sounds. Loud Hailer, Fog Horn and Warning Signal features are all available, enhancing onboard safety and communications while navigating in the dark or fog. When connected with the second-station handset, intercom communications are available, allowing communications between the two devices. Additionally, the horn speaker can be used to collect external sounds and transmit them through the built-in speaker with a function called Listen Back. In this way, a person on the deck can easily communicate with the bridge, a particularly useful feature for a variety of fishing vessels and workboats. The Listen Back function can also be an effective tool on sport fishing vessels, allowing the horn speaker to collect the sound from fishing rods and lines when you get a strike.
Features:
NMEA2000 Certified VHF, AIS Receiver, 30-Watt Loudhailer, GPS & Remote DSC
Simplified installation thanks to its pigtail cables & "5-in-1" configuration
Dual-station operation w/optional HS4800 full-function remote (up to 30 meters)
Single NMEA2000 connection for backup GPS/AIS Receiver/Remote DSC
Outputs NMEA0183 Position, AIS and DSC data to legacy equipment
IP67 waterproof transceiver, microphone, handset (option) & speaker (option)
Cosmetic match to TZtouch2 for consistent "family" look when flush mounted
Multiple mounting options (Desktop, Overhead, Flush Mount)
Initiate DSC calls directly from TZtouch2 MFDs (version 6.01 software)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
834.00 |
|
|
FM4850 Black Box VHF Radio with GPS, AIS, DSC & Loudhailer
The Ultimate 5-In-1 Tool of VHF Radios
The FM4850 is a marine Black Box VHF radiotelephone with built-in Class D DSC, AIS Receiver, and Simplified Loud Hailer with intercom. Its compact housing enables it to be installed in a variety of craft, even vessels where space is limited, such as center-console boats.The FM4850 handset shares a common appearance with other Furuno equipment, such as NavNet TZtouch2, NavPilot 711C, and the FI70 Instrument series, offering an integrated appearance to any helm. Its built-in AIS Receiver can be used to overlay AIS targets with networked GPS Plotters or MFD's, such as NavNet TZtouch, NavNet TZtouch2, or GP1871F/GP1971F combo units.
Built-In DSC & AIS
An external GPS antenna can be connected to the FM4850, and it can share its own GPS, DSC and AIS information via NMEA0183 or NMEA2000. When connected via NMEA2000 to any NavNet TZtouch2 MFD, DSC calling can be initiated directly from the TZtouch2 MFD by simply tapping on the AIS/DSC target and selecting [DSC Call]. Additionally, when MOB (Man Overboard) is activated on a TZtouch2 MFD, the FM4850 enters a special mode where you can initiate a distress call by simply pushing the rotary knob on the handset.
Loud Hailer, Intercom & Listen Back Features
The unit can operate as a simplified Loud Hailer with intercom, featuring 8 patterns of alert sounds. Loud Hailer, Fog Horn and Warning Signal features are all available, enhancing onboard safety and communications while navigating in the dark or fog. When connected with the second-station handset, intercom communications are available, allowing communications between the two devices. Additionally, the horn speaker can be used to collect external sounds and transmit them through the built-in speaker with a function called Listen Back. In this way, a person on the deck can easily communicate with the bridge, a particularly useful feature for a variety of fishing vessels and workboats. The Listen Back function can also be an effective tool on sport fishing vessels, allowing the horn speaker to collect the sound from fishing rods and lines when you get a strike.
Features:
NMEA2000 Certified VHF, AIS Receiver, 30-Watt Loudhailer, GPS*, Remote DSC & Multi-Station Intercom
Up to 3-stations w/optional HS4800A full-function remotes (up to 30 meters)
Single NMEA2000 connection for backup GPS*/AIS Receiver/Remote DSC
Outputs NMEA0183 Position, AIS and DSC data to legacy equipment
IP67 waterproof transceiver, handset & speaker
Simple installation thanks to its robust metal & waterproof black box design
Initiate DSC calls directly from TZtouch2 MFDs (version 6.21 software)
*Built-in GPS Receiver requires optional GPS Antenna, such as the GPA017
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
954.00 |
|
|
RS40-B VHF Radio with Class B AIS Transceiver & Internal GPS
See and Be Seen with Integrated AIS
The RS40-B includes a Class B AIS transceiver, which not only receives AIS targets but also transmits your boat's position to nearby AIS-equipped vessels. This helps other mariners to spot your boat through any conditions, day or night. A built-in AIS receiver monitors the position of other AIS-equipped vessels, helping you to proactively avoid collisions in crowded harbors and waterways. AIS information can be viewed on the radio’s built-in screen or overlaid on your chart or radar screen through a compatible multifunction display.
Removable Fist Mic
The RS40-B's removable fist mic can be connected to the front or rear of the radio, and optional extension cables allow the mic and radio to be mounted separately. This offers a simple and cost-effective solution for any mounting location, with no cable clutter. For example, the RS40-B can be mounted overhead, with no hanging cables, while the mic is connected to an extension socket on the dash below.
Expandable with Wireless Handsets
Add an optional HS40 wireless handset to take your radio anywhere on board. Each handset duplicates your radio's display and controls, enabling remote access to all key functions. Up to two handsets can be connected to a single RS40-B, and with multiple handsets connected your radio doubles as an on-board intercom.
Features:
Integrated Class B AIS transceiver
Class D DSC-approved VHF radio
Integrated GPS receiver
Removable fist mic supports front or rear connection
Connect up to two wireless handsets
Add an optional loudhailer or external speaker
NMEA 0183® and NMEA 2000® connectivity
Unit Dimensions 7.92" wide x 3.85 High Flush mounted
In the Box:
000-14921-001 Fist Mic RS40
000-14917-001 Mounting Bracket with Knobs
000-14915-001 Flush Mounting Kit
000-14912-001 Suncover
|
1438.80 |
|
|
RS40-B VHF Radio with Class B AIS Receiver & GPS-500 GPS Antenna
See and Be Seen with Integrated AIS
The RS40-B includes a Class B AIS transceiver, which not only receives AIS targets but also transmits your boat's position to nearby AIS-equipped vessels. This helps other mariners to spot your boat through any conditions, day or night. A built-in AIS receiver monitors the position of other AIS-equipped vessels, helping you to proactively avoid collisions in crowded harbors and waterways. AIS information can be viewed on the radio’s built-in screen or overlaid on your chart or radar screen through a compatible multifunction display.
Removable Fist Mic
The RS40-B's removable fist mic can be connected to the front or rear of the radio, and optional extension cables allow the mic and radio to be mounted separately. This offers a simple and cost-effective solution for any mounting location, with no cable clutter. For example, the RS40-B can be mounted overhead, with no hanging cables, while the mic is connected to an extension socket on the dash below.
Expandable with Wireless Handsets
Add an optional HS40 wireless handset to take your radio anywhere on board. Each handset duplicates your radio's display and controls, enabling remote access to all key functions. Up to two handsets can be connected to a single RS40-B, and with multiple handsets connected your radio doubles as an on-board intercom.
Features:
Integrated Class B AIS transceiver
Class D DSC-approved VHF radio
Integrated GPS receiver
Removable fist mic supports front or rear connection
Connect up to two wireless handsets
Add an optional loudhailer or external speaker
NMEA 0183® and NMEA 2000® connectivity
Includes GPS-500 for enhanced performance
Unit Dimensions 7.92" wide x 3.85 High Flush mounted
In the Box:
000-13613-001 GPS-500 GPS Antenna
000-14921-001 Fist Mic RS40
000-14917-001 Mounting Bracket with Knobs
000-14915-001 Flush Mounting Kit
000-14912-001 Suncover
|
1558.80 |
|