Horn Speaker  Audio output for foghorn and hailer functions. Technical Specifications: Maximum Input Power - 40 W Rated Input Power - 30 W Impedance - 4 Ω Dimensions (W x H x D)  - 7.87" x 4.72" x 9.13"  (20 x 12 x 23.2) Weight - 2.3 lb (1050 g) *Sold as an Individual 

M510 EVO VHF with NMEA 2000 The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances the experience at sea even more. Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, and sailing, as well as in rescue and public safety. *AIS receiver not included in the M510 EVO 41 NMEA 2000™ and Loud 25 W Two-Way Hailer/20 W RX Hailer Now Built-in The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, AIS information*, DSC call, and radio channel data to other equipment. When connected to the optional SP-37 speaker horn, users can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets users listen to the radio traffic on the deck or tower through the hailer speaker. Users can also sound foghorn patterns from the hailer speaker. Radio Control & Intercom Through Smart Devices Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature.  Users can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.    Award Winning Sleek Design - iF DESIGN AWARD 2022 The IC-M510 series (including the IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard. Wide Viewing Angle Color TFT LCD The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing-angle display has high-resolution characters and function icons. Hold down the DISP key to switch the night mode screen, ensuring good readability in low-light conditions. Built-in Class D DSC, “Distress” Button Can be a Lifesaver in an Emergency Situation With just a press of the “DISTRESS” button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security. 15 W Speaker Provides Clear and Loud Audio The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.  Simplified Navigation Function The navigation function guides users to a specified waypoint or AIS target. Users can assign up to 100 destinations as waypoints, such as favorite fishing spots or starting positions for yacht races. Combined with MA-510TR Supports Safer Navigation When connected to the optional MA-510TR Class B AIS transponder, users can send and receive real-time information about vessels, including identity, position, speed, course, and other relevant data, displayed on the screen. Making a vessel's position known to others helps prevent collisions and accidents, especially at night, in rough weather, or on crowded shipping routes. The MA-510TR enhances safety during navigation at sea. Active Noise Canceling Technology The Active Noise Cancelling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment. Other Features: Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna) IP68 advanced waterproofing (1 m depth of water for 60 minutes) Voice Scrambler with optional UT-112A AquaQuake™ prevents audio degradation from a water-logged speaker Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement External speaker connection Optional HM-195 CommandMic™ are available Supports 4-digit channels Supplied waterproof flash mount gasket for panel mount Specifications: General Specifications: Frequency range: TX: 156.025 157.425 MHz; RX: 156.050 163.275 MHz; DSC: 156.525 MHz; AIS1, 2*1: 161.975, 162.025 MHz Usable Channels: USA, CAN, INT, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1 Power Supply Requirement: 13.8 V DC (11.7 15.9 V DC) Current Drain (at 13.8 V DC): TX 25 W output: 5.0 A; RX Max. audio: 1.6 A, 2.0 A (with HM-195), 4.0 A (with extSP), 7.3 A (with ext SP, RX hailer, and HM-195) Operating Temperature Range: –20 degrees C +60 degrees C, –4 degrees F +140 degrees F Antenna Impedance: 50 Ω Dimensions (W x X x D): 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in Weight (approx.): 730 g, 1.6 lb (not including microphone) Transmitter Specifications: Output Power (at 13.8 V DC): 25 W, 1W Max. Frequency Deviation: ±5 kHz Frequency Tolerance: ±0.5 kHz Spurious Emissions: Less than −70 dBc (at 25 W) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications: Sensitivity (at 12 dB SINAD): –10 dBμ typical DSC (1% BER): –1 dBμ emf typical Adjacent Channel Selectivity: More than 75 dB DSC (1% BER): More than 73 dBμ emf Spurious Response: More than 75 dB DSC (1% BER): More than 73 dBμ emf Intermodulation: More than 75 dB DSC (1% BER): More than 68 dBμ emf Hum & Noise: More than 40 dB Audio Output Power: More than 15 W (external speaker) Audio Output Power (at 10% distortion with 4 Ω): 20 W typical (RX Hailer), 25 W typical (Hailer) Wireless LAN Specifications: Wireless LAN standard: IEEE802.11 b/g/n Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels: 1 to 13 (2.4 GHz band)*2 Output Power: Less than 10 mW/MHz Supplied Accessories: Speaker microphone, HM-205RB Microphone hanger DC power cable Mounting bracket kit Flush mount gasket *1 Only for the Integrated AIS version. *2 May differ depending on the country of use.

M510 EVO VHF with AIS & NMEA 2000 The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances the experience at sea even more. Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, and sailing, as well as in rescue and public safety. *AIS receiver is integrated in the M510 PLUS EVO 51 NMEA 2000™ and Loud 25 W Two-Way Hailer/20 W RX Hailer Now Built-in The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, AIS information*, DSC call, and radio channel data to other equipment. When connected to the optional SP-37 speaker horn, users can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets users listen to the radio traffic on the deck or tower through the hailer speaker. Users can also sound foghorn patterns from the hailer speaker. Radio Control & Intercom Through Smart Devices Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature.  Users can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.    Award Winning Sleek Design - iF DESIGN AWARD 2022 The IC-M510 series (including the IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard. Wide Viewing Angle Color TFT LCD The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing-angle display has high-resolution characters and function icons. Hold down the DISP key to switch the night mode screen, ensuring good readability in low-light conditions. Built-in Class D DSC, “Distress” Button Can be a Lifesaver in an Emergency Situation With just a press of the “DISTRESS” button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security. 15 W Speaker Provides Clear and Loud Audio The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.  Integrated AIS Receiver* With its integrated AIS receiver*1 or external NMEA sentence*2, the IC-M510 can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen. *1 AIS receiver is not included, depending on the transceiver version. *2 Optional MA-510TR or third-party AIS receiver/transponder. Simplified Navigation Function The navigation function guides users to a specified waypoint or AIS target. Users can assign up to 100 destinations as waypoints, such as favorite fishing spots or starting positions for yacht races. Combined with MA-510TR Supports Safer Navigation When connected to the optional MA-510TR Class B AIS transponder, users can send and receive real-time information about vessels, including identity, position, speed, course, and other relevant data, displayed on the screen. Making a vessel's position known to others helps prevent collisions and accidents, especially at night, in rough weather, or on crowded shipping routes. The MA-510TR enhances safety during navigation at sea. Active Noise Canceling Technology The Active Noise Cancelling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment. Other Features: Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna) IP68 advanced waterproofing (1 m depth of water for 60 minutes) Voice Scrambler with optional UT-112A AquaQuake™ prevents audio degradation from a water-logged speaker Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement External speaker connection Optional HM-195 CommandMic™ are available Supports 4-digit channels Supplied waterproof flash mount gasket for panel mount Specifications: General Specifications: Frequency range: TX: 156.025 157.425 MHz; RX: 156.050 163.275 MHz; DSC: 156.525 MHz; AIS1, 2*1: 161.975, 162.025 MHz Usable Channels: USA, CAN, INT, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1 Power Supply Requirement: 13.8 V DC (11.7 15.9 V DC) Current Drain (at 13.8 V DC): TX 25 W output: 5.0 A; RX Max. audio: 1.6 A, 2.0 A (with HM-195), 4.0 A (with extSP), 7.3 A (with ext SP, RX hailer, and HM-195) Operating Temperature Range: –20 degrees C +60 degrees C, –4 degrees F +140 degrees F Antenna Impedance: 50 Ω Dimensions (W x X x D): 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in Weight (approx.): 730 g, 1.6 lb (not including microphone) Transmitter Specifications: Output Power (at 13.8 V DC): 25 W, 1W Max. Frequency Deviation: ±5 kHz Frequency Tolerance: ±0.5 kHz Spurious Emissions: Less than −70 dBc (at 25 W) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications: Sensitivity (at 12 dB SINAD): –10 dBμ typical DSC (1% BER): –1 dBμ emf typical Adjacent Channel Selectivity: More than 75 dB DSC (1% BER): More than 73 dBμ emf Spurious Response: More than 75 dB DSC (1% BER): More than 73 dBμ emf Intermodulation: More than 75 dB DSC (1% BER): More than 68 dBμ emf Hum & Noise: More than 40 dB Audio Output Power: More than 15 W (external speaker) Audio Output Power (at 10% distortion with 4 Ω): 20 W typical (RX Hailer), 25 W typical (Hailer) Wireless LAN Specifications: Wireless LAN standard: IEEE802.11 b/g/n Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels: 1 to 13 (2.4 GHz band)*2 Output Power: Less than 10 mW/MHz Supplied Accessories: Speaker microphone, HM-205RB Microphone hanger DC power cable Mounting bracket kit Flush mount gasket *1 Only for the Integrated AIS version. *2 May differ depending on the country of use.

15W 4-Ohm 5" Loud Hailer Speaker with Bracket & Talkback - White Shakespeare marine speakers are rated from 5W to 40W power, covering radio output and hailer/listen-back applications. All are engineered to withstand the rigors of the marine environment. HS-5A Hailer Horn Speaker is made with a durable plastic weather-proof construction. 5” with 15 watts, this hailer is compact but efficient. Specifications: Size: 5" 4-Ohm Max Power: 15W

External Speaker - Black Features: 4x4 inch external speaker, same as supplied Input impedance: 4 ohms Max input power: 7 Watts

Waterproof Speaker Mic 9-Pin For use with M88

Why Icom Marine Products? Without question the Marine VHF Radio is one of the most valuable pieces of safety equipment on board. With channel 16 (for voice) and channel 70 (for digital DSC) being monitored 24 hours a day by the U.S. Coast Guard, the VHF Radio can deliver a call for assistance, allow you to listen to the latest weather report, or simply keep you in touch with other boats on the water. Icom's reputation is for setting the standards for everyone else to follow; standards like submersible construction and Military Spec.   The new menu system provides easy and intuitive operation. The bottom line of the full dot-matrix display shows the software key functions which can be toggled with the left and right buttons. The directional keypad allows you to perform various operations and settings. Click Now to check out the world's first active noise cancelling handheld with built-in DSC and GPS.   The IC-M424 has a built-in 10W amplifier that increases the audio output from additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the additional external speaker.     CommandMic IV (HM-195) 4th Generation Command & Control is a new look for total control of all communications and Class D DSC functions. The new optional CommandMic IV makes it convenient for using the IC-M424 from a separate cabin or tower. All functions of the IC-M424 can be controlled from the CommandMic IV.  

LH5000 Loudhailer 30W Your safety needs perfect communication The Furuno LH5000 is a powerful Loud Hailer designed to immediately draw attention to your vessel by amplifying your voice, or any of eight internationally acknowledged warning signals, through the horns. The LH5000 allows you to instantly notify nearby vessels of your presence and status regardless of limited visibility conditions, such as thick fog or dark of night, that might otherwise mask your presence. Using up to six powerful horn speakers with an impressive output power of 30 watts each, the LH5000 is sure to capture the attention of anyone in your proximity. Up to 6 Intercoms for onboard communications and public address The LH5000 can also be connected to onboard intercom speakers. Because the Intercom feature is a completely separate function of the LH5000, you won't have worry about the impressive warning signals being transmitted through the dedicated two-way intercom speakers! The LH5000 can also gather distant sounds and amplify them through its built-in speaker. This feature, called Listen Back, is incredibly useful for the pilot to hear voices from the docks, deck, or even other nearby vessels. Other features include Siren Mode, which can be connected to the vessel's fire detection systems, and an Alarm Mode, which is very useful when it comes to theft detection. You can even connect a CD player or Radio to play high-volume audio through the horns and intercom speakers. Features Two (2) 30 Watt hailer output channels (FWD & AFT) Up to six (6) 5 Watt remote intercom stations, allowing two-way communication between master & individual remote station, or all stations, simultaneously Bright LCD with user-programmable intercom names for easy operation Built-in high quality speaker for intercom & hailer listen capability Eight (8) automatic fog/warning signals Manually controlled hailer warning signals External speaker output & alarm siren capability Flush mount ready (includes gasket and cutout template) Fully waterproof (IP67) main unit, microphone & optional intercom speakers Auxiliary Audio Input (i.e. music or another audio source) can be transmitted throughout all connected hailers and intercoms This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

M410BB 11 Black Box VHF with Black Command Mic & 2 Command Mic Ports Icom’s M410BB is a flexible black box mounted on a fixed mount that provides VHF communications for vessels with limited helm space. The supplied black CommandMic™ controls the radio for essential communications on the water. Clean Installation for Limited Helm Space The M410BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation CommandMic™ Stations Add an additional CommandMic™ to extend communication points for boats requiring a second communications station. This is ideal for boats that need communication between the cockpit and other locations on the boat. Access the intercom functions for one-to-all or one-to-one communications on the boat. Class D DSC Functionality On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M410BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. NMEA200® and NMEA 0183-HS® The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment. Loud One-Way RX Hailer The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker. Active Noise Cancelling The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments. Features: AquaQuake™ function Anchor watch function Specifications: Command Mic Color: Black Remote Stations: Up to 2 Output Power: 25W GPS: Internal GPS GNSS Receiver, with external GPS antenna connection NMEA: NMEA 2000®/ NMEA 0183® -HS Waterproof Rating: IPX7 Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz Usable Channels: USA, INT, CAN, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground) Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating Temperature Range: –20°C-60°C /  –4°F-140°F Antenna Impedance: 50 Ω nominal Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in. Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz Transmitter Specifications: Output Power (at 13.8V DC):  25 W, 1 W (high, low) Max. Frequency Deviation: +/- 5 kHz Frequency Tolerance: +/- 0.5 kHz Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications:  Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf Hum and Noise: More than 40 dB Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)

M410BB GW 11 Black Box VHF with White Command Mic & 2 Command Mic Ports Icom’s M410BB is a flexible black box mounted on a fixed mount that provides VHF communications for vessels with limited helm space. The supplied white CommandMic™ controls the radio for essential communications on the water. Clean Installation for Limited Helm Space The M410BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation CommandMic™ Stations Add an additional CommandMic™ to extend communication points for boats requiring a second communications station. This is ideal for boats that need communication between the cockpit and other locations on the boat. Access the intercom functions for one-to-all or one-to-one communications on the boat. Class D DSC Functionality On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M410BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. NMEA200® and NMEA 0183-HS® The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment. Loud One-Way RX Hailer The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker. Active Noise Cancelling The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments. Features: AquaQuake™ function Anchor watch function Specifications: Command Mic Color: White Remote Stations: Up to 2 Output Power: 25W GPS: Internal GPS GNSS Receiver, with external GPS antenna connection NMEA: NMEA 2000®/ NMEA 0183® -HS Waterproof Rating: IPX7 Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz Usable Channels: USA, INT, CAN, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground) Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating Temperature Range: –20°C-60°C /  –4°F-140°F Antenna Impedance: 50 Ω nominal Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in. Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz Transmitter Specifications: Output Power (at 13.8V DC):  25 W, 1 W (high, low) Max. Frequency Deviation: +/- 5 kHz Frequency Tolerance: +/- 0.5 kHz Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications:  Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf Hum and Noise: More than 40 dB Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)

M510BB 21 Black Box VHF with Black Command Mic & 3 Command Mic Ports Icom’s M510BB is perfect for boats that need AIS to receive functionality without taking up precious helm space. The supplied black CommandMic™ provides all the safety and communication functions for commercial and leisure boaters. Clean Installation for Limited Helm Space The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation CommandMic™ Stations Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, flybridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat. AIS Receive The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display). DSC Functionality and Remote Control In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control. NMEA200® and NMEA 0183-HS® The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment. Class D DSC Functionality On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio. Loud One-Way RX Hailer The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker. Active Noise Cancelling The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments. Features: AquaQuake™ function Anchor watch function Specifications: Command Mic Color: Black Remote Stations: Up to 3 Output Power: 25W GPS: Internal GPS GNSS Receiver, with external GPS antenna connection NMEA: NMEA 2000®/ NMEA 0183® -HS Waterproof Rating: IPX7 Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz Usable Channels: USA, INT, CAN, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground) Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating Temperature Range: –20°C-60°C /  –4°F-140°F Antenna Impedance: 50 Ω nominal Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in. Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz Transmitter Specifications: Output Power (at 13.8V DC):  25 W, 1 W (high, low) Max. Frequency Deviation: +/- 5 kHz Frequency Tolerance: +/- 0.5 kHz Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications:  Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf Hum and Noise: More than 40 dB Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)

M510BB GW 21 Black Box VHF with White Command Mic & 3 Command Mic Ports Icom’s M510BB is perfect for boats that need AIS to receive functionality without taking up precious helm space. The supplied white CommandMic™ provides all the safety and communication functions for commercial and leisure boaters. Clean Installation for Limited Helm Space The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation CommandMic™ Stations Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, flybridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat. AIS Receive The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display). DSC Functionality and Remote Control In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control. NMEA200® and NMEA 0183-HS® The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment. Class D DSC Functionality On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio. Loud One-Way RX Hailer The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker. Active Noise Cancelling The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments. Features: AquaQuake™ function Anchor watch function Specifications: Command Mic Color: White Remote Stations: Up to 3 Output Power: 25W GPS: Internal GPS GNSS Receiver, with external GPS antenna connection NMEA: NMEA 2000®/ NMEA 0183® -HS Waterproof Rating: IPX7 Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz Usable Channels: USA, INT, CAN, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground) Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating Temperature Range: –20°C-60°C /  –4°F-140°F Antenna Impedance: 50 Ω nominal Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in. Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz Transmitter Specifications: Output Power (at 13.8V DC):  25 W, 1 W (high, low) Max. Frequency Deviation: +/- 5 kHz Frequency Tolerance: +/- 0.5 kHz Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications:  Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf Hum and Noise: More than 40 dB Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)

M330 VHF Compact Radio - Black Top Performance Ultra Compact VHF Ultra Compact Body, Flexible Installation The IC-M330/G has a palm-sized compact body (W×H×D; 156.5 × 66.5 × 110.1 mm; 6.2 × 2.6 × 4.3 in). The radio can be installed in limited space. Speaker Delivers Dynamic, Clear Audio A speaker design delivers dynamic and clear sound over a wide bass and treble range. The IC-M330/G provides a distortion-free clear audio even at full volume. Built-in Class D DSC The radio monitors CH 70 continuously, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.Class Leading Receiver PerformanceThe radio provides reliable communication in RF busy environment like a marina. (Selectivity and IMD: more than 70 dB) Intuitive Operation with Icom Marine User Interface A combination of the directional keypad and soft keys provides simple, smooth operation. Most used functions are assigned to soft keys for quick one push function access. Made in Japan Quality and Reliability All Icom products are tested to pass rigorous in-house tests as well as environmental tests at the Wakayama Icom plant before shipping. Our world-leading products and quality is tradition. Features: IPX7 submersible (1 m depth of water for 30 minutes) AquaQuake™ prevents audio degradation from a water-logged speaker Common NMEA interface for external GPS/NAV connection MA-500TR Class B AIS transponder compatible Tag scan and favorite channel functions Dual/tri-watch function for monitoring CH16 and/or call channel Priority scan function Display and keypad backlighting External speaker connection Weather channel with weather alert Supplied hand microphone, HM-235B/W, with channel up/down keys and a CH16/Call channel key 3-digit or 4-digit channel display selectable Supplied Accessories HM-235B/W hand microphone DC power cable Mounting bracket kit GPS antenna (5 m; 16.4 ft cable) *Only for the IC-M330G Supplied Accessories: HM-235B/W hand microphone DC power cable Mounting bracket kit GPS antenna (5m; 16.4' cable) *Only for the IC-M330G

M330 VHF Radio Compact with GPS - Black Top Performance Ultra Compact VHF Ultra Compact Body, Flexible Installation The IC-M330E/GE has a palm-sized compact body (W×H×D; 156.5 × 66.5 × 110.1 mm; 6.2 × 2.6 × 4.3 in). The radio can be installed in limited space. Speaker Delivers Dynamic, Clear Audio A speaker design delivers dynamic and clear sound over a wide bass and treble range. The IC-M330/G provides a distortion-free clear audio even at full volume. Built-in Class D DSC The radio monitors CH 70 continuously, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.Class Leading Receiver PerformanceThe radio provides reliable communication in RF busy environment like a marina. (Selectivity and IMD: more than 70 dB) Intuitive Operation with Icom Marine User Interface A combination of the directional keypad and soft keys provides simple, smooth operation. Most used functions are assigned to soft keys for quick one push function access. GPS Receiver Built-in (IC-M330G) Supplied GPS antenna A built-in GPS receiver provides your location, bearing and speed by using information from GPS, GLONASS and SBAS. The acquired position information can be used for DSC calls. Made in Japan Quality and Reliability All Icom products are tested to pass rigorous in-house tests as well as environmental tests at the Wakayama Icom plant before shipping. Our world-leading products and quality is tradition. Features: IPX7 waterproof (1m depth of water for 30 minutes) AquaQuake™ prevents audio degradation from a water-logged speaker Common NMEA interface for external GPS/NAV connection MA-500TR Class B AIS transponder compatible Tag scan and favorite channel functions Dual/tri-watch function for monitoring CH16 and/or call channel Priority scan function Display and keypad backlighting External speaker connection 3-digit or 4-digit channel display selectable Supplied hand microphone, HM-235B/W with channel up/down keys and a CH16/Call channel key

M330 VHF Radio Compact with GPS - White Top Performance Ultra Compact VHF Ultra-Compact Body, Flexible Installation The IC-M330E/GE has a palm-sized compact body (W×H×D; 156.5 × 66.5 × 110.1 mm; 6.2 × 2.6 × 4.3 in). The radio can be installed in a limited space. Speaker Delivers Dynamic, Clear Audio A speaker design delivers dynamic and clear sound over a wide bass and treble range. The IC-M330/G provides distortion-free clear audio even at full volume. Built-in Class D DSC The radio monitors CH 70 continuously, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request, and DSC test calls. Class-Leading Receiver PerformanceThe radio provides reliable communication in RF busy environment like a marina. (Selectivity and IMD: more than 70 dB) Intuitive Operation with Icom Marine User Interface A combination of the directional keypad and soft keys provides a simple, smooth operation. Most used functions are assigned to soft keys for quick one push function access. GPS Receiver Built-in (IC-M330G) Supplied GPS antenna A built-in GPS receiver provides your location, bearing, and speed by using information from GPS, GLONASS, and SBAS. The acquired position information can be used for DSC calls. Made in Japan Quality and Reliability All Icom products are tested to pass rigorous in-house tests as well as environmental tests at the Wakayama Icom plant before shipping. Our world-leading products and quality is tradition. Features: IPX7 waterproof (1m depth of water for 30 minutes) AquaQuake™ prevents audio degradation from a water-logged speaker Common NMEA interface for external GPS/NAV connection MA-500TR Class B AIS transponder compatible Tag scan and favorite channel functions Dual/tri-watch function for monitoring CH16 and/or call channel Priority scan function Display and keypad backlighting External speaker connection 3-digit or 4-digit channel display selectable Supplied hand microphone, HM-235B/W with channel up/down keys and a CH16/Call channel key