|
Antenna for RapidFix, Sat II & GlobalFix
Replacement antenna.
Compatible With:
RapidFix, Satellite 2 and GlobalFix
Technical Specifications:
Dimensions (H) - 7.39" (18.77 cm)
Position - Vertical
Frequency - 406 & 121.5 MHz
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
44.02 |
|
|
Antenna for GlobalFix V4 RLB-41
Black antenna specifically for ACR's GlobalFix V4, RLB-41.
|
51.88 |
|
|
Standard Antenna
Soft, flexible replacement antenna f/M92D
|
20.52 |
|
|
Standard Antenna
Standard Replacement Antenna f/GM1600
|
15.40 |
|
|
Standard Antenna f/M88 & F50
150-174MHz
Red Ring
|
13.68 |
|
|
CLR Marine will now be stocking portable satellite phones and accessories by Iridium and Inmarsat. Stay in touch and be connected anywhere, anytime! They are found at http://www.clrmarine.com/462m4/communication/satellite-telephone.html
|
|
|
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solutions to your electronics mounting requirements. Dual Mount for a Radar Dome and a Satellite Dome. Two Mounting Plates required.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Two marine electronics mounting platforms
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
18" Sat Dome Dual Mount
Aft raked 30 degrees
18" tall
|
934.67 |
|
|
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solutions to your electronics mounting requirements. Dual Mount for a Radar Dome and a Satellite Dome. Two Mounting Plates required.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Two marine electronics mounting platforms
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
24" Sat Dome Dual Mount
Aft raked 30 degrees
24" tall
|
1511.05 |
|
|
Satellite Radio Antenna with Mounting Kit
RS100 is a very high performance marine satellite radio antenna, rugged, small and very easy to install thanks to the integrated magnetic mount and the supplied 7M (23’)coax cable with SMB termination. Using the latest Satellite Radio technology, exceeds the most recent specifications. RS100 is a low-profile antenna is designed for satellite radios.
Features:
High performance antenna
Designed for satellite radios
Extended range
Low-profile design
Supplied with 7M (23’) coax cable & mounting kit
Anti-yellowing materials
Corrosion resistant antenna
Specifications:
Frequency Range: 2320 - 2345 MHz [2.3 GHz]
Gain Average: 24 dB
Impedance: 50 ohm
Polarization: LHCP [Left Hand Circular Polarization]
SWR: ≤ 2.0:1
Max Input Power: 5V / 150 mA
DC Ground: No
Antenna Length: 2” (50mm)
Antenna Diameter: 3,7” (95mm)
Antenna Weight: 7oz (200 gr)
Termination: SMB, 23’ (7M) cable
Supplied Accessories:
23’ (7M) coax cable with SMB connector
Reinforced nylon mount
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
53.99 |
|
|
2-Way Satellite Radio Antenna Splitter DA-2330
Digital Antenna's innovative DA-2330 2-way amplified satellite radio splitter connects two receivers to one antenna -- perfect for listening to music and monitoring the weather or listening to different music in multiple staterooms. The first and only satellite radio splitter, it simplifies installation while improving performance of XM and Sirius satellite radio systems. The splitter's 10dB gain compensates for cable loss, allowing longer cable runs while maintaining clear signals. Power is supplied from any of the radios connected to the splitter's output via Digital Antenna's auto power detection circuitry.Manufactured for harsh marine environments, the DA-2330 features a durable black powder-coated finish and high quality gold plated mini-UHF female connectors. A double mini-UHF male adapter is also included for easy connection to Digital Antenna's 233-XM-50 Satellite Radio Antenna.
Features:
Amplified for no signal loss
Operate multiple radios from a single antenna
Ideal for longer cable runs
Works with XM or Sirius radio
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
123.60 |
|
|
Light Arm for Radar Domes and Sat Domes
Edson's 68650 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Radar Dome and Satellite Dome.
Light Arm extends 14" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.
Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).
Specifications:
Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)
Base mounts sold separately
|
194.40 |
|
|
GA™ 38 GPS/GLONASS Antenna for Cortex® V1 & M1
Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile water-resistant housing and provides 3 easy mounting solutions: pole, surface, or under-deck (for the underside of fiberglass decks). External GPS/GLONASS antennas provide increased flexibility and installation options as well as the potential for enhanced reception of GPS/GLONASS signal for those products with built-in GPS/GLONASS antennas.
Specifications:
Dimensions (DxH): (inch) 3-19/32" x 1-5/18" / (mm) 91.6 x 49.5
Weight: 7.1 oz / 201 g.
Temperature Range: -22° F to 176° F / -30° C to 80° C
Case Material: Fully gasketed, high-impact plastic alloy, waterproof to IPX7
What's In The Box?
GA 38
Surface mounting bracket
Pole mounting bracket
Under-deck mounting bracket
Mounting hardware
BNC-SMA antenna cable (32 ft/10m)
Installation instructions
|
109.40 |
|
|
12" Modular Mount AFT Raked 10" x 10" Base Plate for Large Sat Domes - 18" Top Plate Required
This Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.
Modular Top Plate
A Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.
Modular Design
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
|
436.80 |
|
|
18" Modular Mount AFT Raked 10 x 10 Base Plate for Large Sat Domes - 18" Top Plate Required
This Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.
Modular Top Plate
A Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.
Modular Design
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
|
552.00 |
|
|
Omni Antenna for Long-Range Repeater
Use with Long-Range Repeater to extend range up to 1,560' in all directions. Each repeater requires two antennas. You can combine omni and Yagi antennas to collect data from all directions and transmit in a single direction, or vice versa.Includes mounting hardware.
NOTE:
FCC regulations require that U.S. customers select either the Omni Antenna (#7656) or the Yagi Antenna (#7660); customers outside the U.S. must purchase third-party antennas in compliance with local regulations
|
255.68 |
|