Shakespeare Style 4710 Flange Mount Shakespeare flange mounts can be used to attach marine antennas to deck or bulkhead. The mounts do not adjust for slanted surfaces, and do not allow lowering the antenna for fishing, passage under overhangs, or for boat storage or towing. They are usually used for small antennas, GPS and radar devices, and marine TV antennas atop radar arches and the like. Low profile 1-1/2" high Stainless steel construction Standard 1" - 14 male threads Great for GPS, Marine TV, and shorter antennas

Shakespeare Style 4365 Straight Mount Shakespeare flange mounts can be used to attach marine antennas to deck or bulkhead. The mounts do not adjust for slanted surfaces, and do not allow lowering the antenna for fishing, passage under overhangs, or for boat storage or towing. They are usually used for small antennas, GPS and radar devices, and marine TV antennas atop radar arches and the like. 4" High Stainless Steel construction Standard 1" - 14 male threads Excellent for Marine TV antennas May be used with Style 4364 Extension Mast (1')

F4B-9 Impeller Pump OEM - Flange Mount Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller pump is its self-priming ability. As the vanes of the impeller are depressed and rebound, they create their own vacuum drawing fluid into the pump. A dry pump can lift the water up to as much as 3 meters. Thus a flexible impeller pump being used for engine cooling needs not to be located below the water line or manually primed. An added feature of flexible impeller pumps is that they can pass fairly large solids without clogging or damaging the pump. This reduces the need for filtering the incoming fluid. For general raw or freshwater applications, the standard long-lasting neoprene rubber impeller is used. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry.  Features:  Flange mount for engines such as: Panda 12000 NE PMS Kubota, Panda 6000 ND PMS Kubota, Panda 8000 NE PMS Kubota, Panda 9000 ND PMS Kubota A general feature of all flexible impeller pumps is that they cannot be permitted to run dry for more than 30 seconds Wearing parts are easily replaceable for all standard models Applications: Engine cooling – raw water handling Freshwater handling Specifications:  Port size: (inch) 3/4" hose Mount Type: Flange CAM: Full 1/1 Lip seal Material: Bronze Cooling Capacity:  The required output of the cooling pump – raw water as well as fresh water handling – is related to: Engine type: (gasoline or diesel) Type of cooling system (size of heat exchanger) Water cooled engine oil, reverse gear, exhaust system *Sold as an Individual

F7B-9 Impeller Pump OEM - SAE A Flange Mount Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller pump is its self-priming ability. As the vanes of the impeller are depressed and rebound, they create their own vacuum drawing fluid into the pump. A dry pump can lift the water up to as much as 3 meters. Thus a flexible impeller pump being used for engine cooling needs not to be located below the water line or manually primed. An added feature of flexible impeller pumps is that they can pass fairly large solids without clogging or damaging the pump. This reduces the need for filtering the incoming fluid. For general raw or freshwater applications, the standard long-lasting neoprene rubber impeller is used. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry. Features:  John Deere, Kohler Flange mount PTO drive style cooling pump for John Deere engines such as: 4039D and 4045T A general feature of all flexible impeller pumps is that they cannot be permitted to run dry for more than 30 seconds Wearing parts are easily replaceable for all standard models Applications: Engine cooling – raw water handling Freshwater handling Specifications:  Port size: (inch) 1 1/4” Hose Mount Type: SAE A Flange CAM: Full 1/1 Shaft: Lip seal  Material: Bronze Cooling Capacity:  The required output of the cooling pump – raw water as well as fresh water handling – is related to: Engine type: (gasoline or diesel) Type of cooling system (size of heat exchanger) Water cooled engine oil, reverse gear, exhaust system *Sold as an Individual

F5B-9 Impeller Pump OEM - Flange Mount Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller pump is its self-priming ability. As the vanes of the impeller are depressed and rebound, they create their own vacuum drawing fluid into the pump. A dry pump can lift the water up to as much as 3 meters. Thus a flexible impeller pump being used for engine cooling needs not to be located below the water line or manually primed. An added feature of flexible impeller pumps is that they can pass fairly large solids without clogging or damaging the pump. This reduces the need for filtering the incoming fluid. For general raw or freshwater applications, the standard long-lasting neoprene rubber impeller is used. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry.  Features:  Crankshaft style cooling pump featured on older style small block GM marine engines such as: American Diesel & Bomac Marine Easy to access impeller design A general feature of all flexible impeller pumps is that they cannot be permitted to run dry for more than 30 seconds Wearing parts are easily replaceable for all standard models Applications: Engine cooling – raw water handling Freshwater handling Specifications:  Port size: (inch) 3/4" NPT Mount Type: Flange CAM: Full 1/1 shaft: Mechanical  Material: Bronze Cooling Capacity:  The required output of the cooling pump – raw water as well as fresh water handling – is related to: Engine type: (gasoline or diesel) Type of cooling system (size of heat exchanger) Water cooled engine oil, reverse gear, exhaust system *Sold as an Individual

Cat Pump Motor Electric Flange Mount 8020

Cat Pump Flange Mount Use the CAT Pumps 8021 Assembly to safely mount a 3-frame pump. This is an OEM CAT Pumps accessory.   Used with CAT Pumps 230, 240, 270 pump models Genuine CAT Pumps component

LED Waterproof 6" Oval Surface Flange Mount Tail Light - Amber with Black Flange Base Featuring LED technology, this flange mount light is waterproof and meets FMVSS/CMNSS 108 requirements. Surface mounting with a pre-wired supply and ring terminal ground for easy installation. Features: Black flange base

3" Blower Flange Mounted - 12V Features: 3" ducts 12V 100 percent factory tested

Engine Cooling Pump - Flange Mount - 1-1/4" Pump Flow rate: 14 gallons/min at 1500 rpm Self priming from dry up to 2.4 m (7.8ft) Features: Constructed from marine quality bronze and stainless steel for ruggedness and reliability Easy to service and maintain Body: Bronze Impeller: Neoprene Wearplate: Not fitted Shaft: 316 Stainless Steel Bearings: Single row, ball type Port Type: 1-1/4" Hose Barb Weight: 5 lb WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SR- Series Flange Mount - 300A Battery Switch Stainless steel hardware and tin-plated copper studs. Can be installed in locations with limited space behind the panel. Features: Isolates the batteries and eliminates battery drain when the vehicle is stored overnight or for longer periods. Electrically cuts off battery power for safety or when the vehicle is being serviced. Ignition protected to SAE J1171 and ISO 8846 for installation in a battery box or on vehicles carrying hazardous loads. Available with integral holes to accept lockout/tagout. No need to purchase additional hardware. Plastic construction will not corrode and stands up to road splash and salt spray. Ingress protected to IP67/ IP69K. The switch can be mounted anywhere on the vehicle. Units have a depth of only 3” (knob front to the end of studs) – can be installed in locations where behind-panel space is limited. Stainless steel hardware and tin-plated copper contacts minimize resistance in harsh environments. Specifications: Current Rating (Continuous) in Amps: 300 Voltage Rating (Max): 32 Circuitry: SPST Ingress Protection: IP67, IP69K Actuator: Plastic Knob Contact Material: Copper Housing: Engineering Thermoplastic Agency Approval - Humidity: 0 - 95% RH Agency Approval - Shock: 50 G Agency Approval - Vibration: 10 G

Roper Pump 18AM08 Pump Flange Mounted W/Relief Roper A Series Gear Pump, model 18AM08 Housing : Cast Iron Gears : Ductile Iron Bearings : Bronze Idler Shafts : Ductile Iron Drive Shafts : Hardened Steel This is a general purpose Roper A series Pump for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer. The Roper A Series pumps are adaptable to a wide range of applications pumping clean fluids, such as pressure lubrication, hydraulic service, fuel supply or general liquid transfer. These pumps are designed to operate at standard motor speeds, with provisions for flange or foot mounting.  

Jabsco 14538-0010 Shaft  

Jabsco 14538-0150 Shaft  

Yamada NDP-20BPT-PP FLANGE Poly Teflon Pump Flanged Yamada NDP-20BPT-PP-FLG Air Operated Double Diaphragm Pump - 3/4" Flange with Polypropylene Body and PTFE Diaphragms NDP-20 series 3/4"" AODD pumps provide a maximum flow rate of 31.7 GPM and are available in Aluminum, Stainless steel (316), and Polypropylene. NDP-20 SPECIFICATIONS Fluid Port3/4"" NPT GPM31.7 Discharge Volume Per CycleRubber 0.163 Gallons PTFE 0.143 Gallons Air MotorMetal Pump - Aluminum Air Motor Plastic Pump - Non-Metallic Intake & Discharge Connections  Polypropylene (PPG)3/4"" Female NPT or 3/4"" ANSI Flange B16.5 #150 Aluminum (ADC-12)3/4"" Female NPT Stainless Steel (316)3/4"" Female NPT Air Inlet 3/8"" Female NPT (includes ball valve) Air Exhaust3/4"" Female NPT (includes silencer)