Shakespeare Galaxy® Style 5228-4 4' Heavy-duty Extension Mast Like the 5228, but 4' length (nominal). Constructed of high-quality Shakespeare white fiberglass, and finished to match Galaxy antennas. This 1 1/2" d"iameter extension mast can be used to increase height of an antenna and thus improve effective range, or to boost placement of an antenna above on-board obstructions. IMPORTANT! If the combined length of your antenna and all extensions is more than 8 feet. you MUST use an upper support bracket Stainless steel upper and lower ferrules with standard 1" - 14 thread Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit One section, actual length 44" Shakespeare Limited Warranty: 5-Years

Shakespeare Galaxy® Style 5228 8' Heavy-duty Extension Mast- Reduced length version Constructed of high-quality Shakespeare white fiberglass, and finished to match Galaxy antennas. This 1-1/2" diameter extension mast can be used to increase height of an antenna and thus improve effective range, or to boost placement of an antenna above on-board obstructions. IMPORTANT! If the combined length of your antenna and all extensions is more than 8', you MUST use an upper support bracket Stainless steel upper and lower ferrules with standard 1" - 14 thread Mount: A Style 409-R or 410-R Mounting Kit is required One section, actual length 95" Shakespeare Limited Warranty: 5-Years

15A 12/3 Heavy-Duty Extension Cord - 50' Heavy-duty marine-grade cable with robust, fully molded ends for use in harsh environments. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

15A 12/3 Heavy-Duty Extension Cord - 25' Heavy-duty marine-grade cable with robust, fully molded ends for use in harsh environments. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NF-4 Heavy Duty Twin Eye Fender 6.4" x 21.6" - White The NF-Series Boat Fender, one of Polyform's newest innovations, features multiple-ribbed, reinforced ropeholds, making it the strongest fender in its class.  The NF Series is an extra tough, recreational-boating fender and a good choice for use in boat locks and tidal areas where fenders are exposed to high stress situations.  The NF Series is designed to last and stand up in the toughest conditions as well as being compact for easy storage in smaller craft. Features: The NF Series blends the styling of the G Series (the world's most copied fender) and the multi-ribbed ropehold of the F Series (the strongest fender in its class) Sleek one-color styling Reinforced twin-eye ropeholds for flexibility and durability Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.4" x 21.6" (16.3 x 54.9cm) Eye Diameter - .75" (1.9cm) Circumference - 20.1" (51.1cm) Volume - 2.1 gallons (7.9L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 3.06lbs *Sold as an Individual

3/4" Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix - Sold by the Foot Trident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required.  Features: Sold by the foot Flexible, but the 147 series is less flexible than the 149 series of hoses Application: Bilge and live well hose Specifications: Tube & Cover: Clear vinyl reinforced with black helix  Color: Clear with black helix Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-49°C)  Inner Diameter: (inch) 3/4" / (mm) 19 Outer Diameter: (inch) 0.968" / (mm) 24.6 Working Pressure: (Psi Vac In./Hg) 28 Weight: (Lb./ 50 ft.) 11 / (Kg/m) 0.33 Bend Radius: (inch) 2.25" / (mm) 57.2 *Burst Pressure is 4 x Working Pressure

Galaxy Style 5228-1, 1 ft Heavy-Duty Extension Mast One foot length. Constructed of high-quality Shakespeare white fiberglass, and finished to match Galaxy antennas. This 1 " diameter extension mast can be used to increase height of an antenna and thus improve effective range, or to boost placement of an antenna above on-board obstructions. For light to moderate applications. Excellent for use with GPS or TV antennas to clear on-board obstructions. Stainless steel upper and lower ferrules with standard 1in-14 thread Mount: Shakespeare Style 409-R or 410-R Mounting Kit (sold seperately) One section, actual length 12" Use an upper support bracket (sold seperately) if the length of antenna and mast total more than eight feet. Color: Galaxy White

Heavy Duty Adjustable Rod Holders Features an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.

Heavy Duty Adjustable Rod Holders Features an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods.

Heavy-Duty Bilge Pump 1700 Series Part #: 4730-4 Heavy-Duty Bilge Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat. The perfect upgrade from 1500 GPH rated pumps especially older and over-rated designs. Easily replaces 2000 GPH rated pumps. Delivers a true 1700 GPH at open flow while drawing less than 6-amps. Features: 12V CE Rated 36" Wire 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Duty Flexmount Blower AC 250 CFM Flexmount Continuous Duty 4" Blower Flexmount Blowers are built to the same high specification as the Heavy Duty Flangemount Blowers for use as air intake or extraction systems in engine rooms, fuel compartments, galleys or heads. Extended Life Induction Motor Tough Reinforced Thermoset Plastic Housing Continuous duty motor with thermal overload protection Flexmount universal bracket permits outlet to face any direction Slip-On Inlet Ducting Connection Efficient High Volume Air Flow Low-Current Draw Corrosion-Resistant Materials Throughout 5,000 hr motor life for teh heaviest of applications. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Heavy-Duty Bilge Pump 2000 Series Part #: 4760-4 Heavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat. Attwood's highest capacity pump! Ball-bearing design provides for cooler motor operation and longer life, Delivers over 2000 GPH at open flow while drawing less than 7-amps. Features: 12V CE Rated 36" Wire 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Shakespeare Style 4700 6" Extension Mast Shakespeare extension masts can be used to extend the reach of smaller marine antennas by increasing their height above the water, or by helping them clear obstructions that would otherwise interfere with proper radiation. Shorter masts are useful for mounting marine TV antennas, GPS receivers, marine satellite TV dishes and the like. 6" long Stainless steel construction Standard 1" - 14 threads, male upper, female lower One inch diameter Durable and attractive

Shakespeare Style 4700-2 24" Extension Mast Shakespeare extension masts can be used to extend the reach of smaller marine antennas by increasing their height above the water, or by helping them clear obstructions that would otherwise interfere with proper radiation. Shorter masts are useful for mounting marine TV antennas, GPS receivers, marine satellite TV dishes and the like. 2' long Stainless steel construction Standard 1" - 14 threads, male upper, female lower One inch diameter Durable and attractive

Shakespeare Style 4187-HD EXTRA HEAVY-DUTY RATCHET MOUNT STAINLESS STEEL Versatile four-way ratchet design for deck or side mounting. Quick-action handle makes operation easy. Standard 1"-14 thread. The Style 4187-HD adds extra strength and rigidity. Use wherever its extra heavy-duty construction is needed. Standard 1"-14 thread. 9/32" hole for cable feed-through Bolt holes: 5/16" dia., 3" x 1-1/2" on center