Shakespeare Style 5911 THE STOWAWAY™ Emergency VHF Flex Antenna Unity Gain LOADED 1/4 WAVE WHIP Comes packed in a 12™ weather-resistant, plastic tube which can ™stow away™ in an easy-to-reach location for instant emergency capability if your main antenna becomes broken or disabled. Complete with 12' cable, connector, and rubber suction cup for fast, easy mounting to any smooth horizontal surface. Flexible vinyl outer covering 10™ overall length Velcro strips for storage included Technical Specifications: Frequency: VHF Marine band Bandwidth: N/A SWR: Adequate across Marine Band. Precise SWR depends on antenna location Impedance: (Ohms): 50 Gain: Unity Max Input (Watts): 25 DC Ground: YES Termination: 12' RG-58 cable Height (feet): 10" Polarization: Vertical Radiation pattern: Omini-directional

Style 4018 VHF 9dB Phased 1/2-wave elements in a collinear array with a coaxial choking sleeve to suppress cable radiation The top choice for charter boat captains and experienced sport fishing enthusiasts. This long-distance VHF antenna is rigid enough to stay erect in rough seas, yet exceptionally lightweight. Brass and copper elements Chrome-plated brass ferrules Includes 20' RG-58 cable and a PL-259 connector Suggested mount: Style 409-R or 410-R Mounting Kit for deck or side mounting Two sections: base 162", tip 66" Technical Specifications: Frequency: VHF Marine band Bandwidth: (within 2.0:1 SWR) 3 MHz SWR: 1.5:1 at 156.8 MHz Impedance: (ohms): 50 Gain: 9 dB Max Input (Watts): 25 DC Ground: NO Termination: 20' RG-58 Height (feet): 19 Polarization: Vertical Radiation pattern: Omni-directional

6500-WB 4FT Broad Band VHF Antenna 3dB Built for maximum performance, this 4’ broad band antenna is designed to endure the harsh environment and communication requirements in commercial, law enforcement and disaster management applications. Whether you install it on a vessel, base station, or a stationary platform, this antenna provides a host of mounting options to fit your need. No tuning or ground plane required. Cable not included. Features: Stainless steel mounting bracket: corrosion resistant even in marine environments. Patent pending mount design: install the U-bolts without removing hardware – no more lost hardware Detachable antenna: handle mounting bracket easily without the weight of the antenna. Mount it on a large variety of Shakespeare® mounts with a 1”-14 thread* IP67**, high wind rating, wide temperature range, and PU Coating: built to last in rain, sun, ice, dust, water splashes and even corrosive marine environments *Requires a Shakespeare 4006 double female ferrule (not included). **When installed as instructed.

476 18.5' Classic VHF Antenna *THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS The Shakespeare 476 antenna is a one-section, phased 1/2-wave collinear array, commercial VHF 10dB marine antenna. Designed to get the message through when all others fail, this unique antenna puts the signal on the horizon, providing gain in all directions. For heavy-duty seagoing applications, such as workboats, tugs, tital well service boats, etc. The reduced-length version (now 18'5") has been shortened to maintain performance while making it easier to ship both internationally and domestically. Built for value without compromising performance or durability, the Classic Series covers the widest variety of vessels in the Shakespeare® family. These antennas keep you connected and meet essential communication needs while offshore. Features: Brass and copper elements provide a standard range and reception Chrome-plated brass or nylon ferrule with standard 1: -14 thread provides for a basic install Smooth, durable, high-gloss white/fiberglass finish prevents yellowing VSWR of <1.5:1 at 156.8 MHz Utilizes 15’ RG 58 cable, PL-259 connector type, unless otherwise noted below* 2-year warranty Specifications: Frequency: VHF Marine band Bandwidth: (within 2.0:1 SWR): 10 MHz SWR: 1.5:1 at 156.8 MHz Impedance (ohms): 50 ohms Gain: 10 dB Max Input (Watts): 350W DC Ground: Yes - Read Shorted Termination: SO-239 connector Height (feet): 18.5' Polarization: Vertical Radiation Pattern: Omni-directional Suggested Mount: 483 Mast Bracket

6018-R Phase III VHF Antenna - 17′ 6″ (5.3M) VHF Marine Band 9dB Gain  Good communication over the VHF Marine Band depends on antenna height, quality and dB Gain. This high performing Phase III™ marine antenna is a powerhouse providing all of those necessities in our rugged, high-strength, foam-filled fiberglass radome for stability in high seas, high winds and high speeds. Features: Silver-plated outer conductor, copper inner conductor • Stainless steel mounting sleeve • Type SO-239 connector inside mounting sleeve for easy mounting and dismounting for stowage • Suggested mount: Shakespeare® Style 409-R or 410-R Mounting Kit • Two sections: Base 110″, Tip 110″ Specifications: Design: Collinear-phased 1/2-wave elements with choking sleeve  Height: 18' (5.48m) Weight: 20lbs (9kg) Gain: 8dB Connector Type: SO-239 Suggested Mounting: 409-R or 410-R Impedance: 50 ohms Max Input Power: 150W DC Grounding: No Shakespeare Limited Warranty: 8 years

5400-XT Galaxy 4' VHF Antenna  Center-fed 1/2 wave coaxial sleeve The compact Galaxy® 5400-XT is an outstanding, general purpose 4' antenna of heavy duty construction for general purpose communications. Its at home on T-tops, hard-tops, and other positions aloft, where its small size can deliver maximum range. Features: Brass and copper elements for maximum range Stainless steel ferrule with standard 1"-14 thread Includes 20' RG-8/X cable and a PL-259 connector Suggested mount: Shakespeare Style 4187 Ratchet Mount One section Shakespeare Limited Warranty: 5 years Includes FME Cables Technical Specifications: Frequency: VHF Marine Band Bandwidth: 5 MHz within 2.0:1 VSWR SWR: nominally 1.5:1 at 156.8 MHz Gain: 3 dB Max Input (Watts): 50 watts Height (feet): 4

5101 8' Classic VHF Antenna with 15' Cable - Reduced Length Version END-FED WITH MATCHING STUB A standard of excellence in an economical antenna! Shakespeare brings you the best of the high-end features in an 8' antenna with a brass element and a smooth, high gloss, polyurethane finish that wont turn yellow in the sun. This antenna delivers not only performance, but superb value. Features: Brass and copper elements Chrome-plated brass ferrule with standard 1"-14 thread Includes 15' RG-58 cable and a PL-259 connector Suggested mount: Shakespeare Style 4187 Ratchet Mount, or use a Shakespeare Style 410-R Mounting Kit plus a Style 4008 Extension Mast to form a 16' antenna system One section Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency:    VHF Marine Band Bandwidth:    (within 2.0 1 SWR): 5 MHz SWR:    1.5:1 at 156.8 MHz Impedance:    (Ohms): 50 Gain:    6 dB Max. Input (Watts):    50 DC Ground:    YES - however, the antenna will read "open circuit" when tested with ohmeter. Termination:    15' RG-58 cable Height (feet):    8' Polarization:    Vertical Radiation pattern:    Omni - directional

Shakespeare Galaxy 5230 14' VHF 8dB Gain 5/8 wave over 1/2 wave dipole The ultra-performer, Shakespeares Style 5230 is the most effective 8dB antenna system available anywhere, thanks to its increased signal capture area. Brass and copper elements for maximum range and efficiency Stainless steel ferrule with standard 1"-14 thread Includes 20 feet of RG-8/X cable and a PL-259 connector Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit Two sections: Base 94", Tip 74" -  Shakespeare Limited Warranty: 5 years Technical Specifications: Frequency: VHF Marine Band Bandwidth: 3 MHz within 2.0:1 VSWR SWR: nominally 1.5:1 at 156.8 MHz Impedance: 50 ohms Gain: 8 dB Max Input (Watts): 200 watts DC Ground: YES Height (feet): 14 Polarization: Vertical

THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS Shakespeare Style 4018-M VHF Marine 19' LENGTH, 9dB PHASED 1/2-WAVE ELEMENTS IN A COLLINEAR ARRAY WITH A COAXIAL CHOKING SLEEVE TO SUPPRESS CABLE RADIATION Same as Style 4018 with a special sleeve for mast mounting. Used primarily for land-based stations and on commercial vessels. The top choice for charter boat captains and experienced sport fishing enthusiasts. This long-distance VHF antenna is rigid enough to stay erect in rough seas, yet exceptionally lightweight. Brass and copper elements Chrome-plated brass mid section ferrules and aluminum sleeve bottom ferrule SO-239 connector at base Suggested mount: Mast mount using supplied 1-1/3" U-bolts. The 4018-M can be strapped to a larger mast if steel banding (not supplied) is used. Two sections: Base 162"; Tip 66&quot: Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency: VHF Marine band Bandwidth: (within 2.0:1 VSWR) 3 MHz SWR: 1.5:1 at 156.8 MHz Impedance: (ohms): 50 Gain: 9 dB Max Input (Watts): 25 DC Ground: NO Termination: SO-239 Height (feet): 19 Polarization: Vertical Radiation pattern: Omni-directional

5309-R 23' Galaxy VHF Antenna THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS Phased 1/2 wave elements in collinear array with a band spread matching sleeve and a choking stub to suppress cable radiation This design invokes all the antenna engineers tricks to produce the clearest possible transmission and reception over the longest range. Features: Brass and copper elements Stainless steel ferrule with standard 1"-14 thread Includes 20' RG-8/X cable and a PL-259 connector Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit (pictured mount not included) Two sections: Base 172", Tip 105" Twin to: Galaxy Style 5310-A HF/SSB Shakespeare Limited Warranty: 5 years Includes FME Cables Technical Specifications: Frequency: VHF Marine Band Bandwidth: 5 MHz within 2.0:1 VSWR SWR: nominally 1.5:1 at 156.8 MHz Gain: 9 dB Max Input (Watts): 150 watts DC Ground: NO Height (feet): 23' Polarization: Vertical

Shakespeare Style 5241-R VHF Marine 36" LENGTH 3dB LOW PROFILE END-FED 1/2-WAVE WITH HEAVY-DUTY WHIP The perfect choice for bass boats, center console fishing boats, or any vessel where compact size is most important. Comes with a heavy-duty stainless steel whip for extra stability at high speeds. Chrome plated brass canister minimizes de-tuning. Sealed, tin-plated copper wire coil Requires mount with center hole for passage of the supplied 15' RG-58 cable. PL-259 connector included Stainless steel whip (36") Suggested mount: Shakespeare Styles 4187, 4188-S, or 4190 Ratchet Mounts Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency: VHF Marine Band Bandwidth: 7 MHz SWR: 1.5:1 at 156.8 MHz Radiation pattern: Omni-directional Gain: 3 dB Max Input (Watts): 50 watts DC Ground: YES Height (feet): 3 Polarization: Vertical

Grand Slam 800 VHF Antenna Mount The GS-800 VHF Antenna Mount was created specifically to prevent climbing on the boat gunnel to raise and lower a VHF antenna. Lift and descend the antenna from the safety of the deck from under the top. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater.  Features: Safe, no-hassle raising and lowering of a VHF antenna  No more climbing on T-tops or gunnels  Machined / Anodized aluminum body  Light brushed finish  Polished Type-316L stainless steel crank handle  Folding crank handle locks flush into base  Threaded shaft for consistent lift and descent  Delrin bearings for smooth operation  Roller bearings in crank assembly  Mounts through up to 2" thick hardtops  Includes 4" x 1/4" round backing plate (hardware not included)  Made in the USA  1-year limited warranty 

VHF Patch Cable for AIS & VHF Antenna Splitter This 2M (6.5') patch cable has PL259 connectors that connect the Vesper Marine AIS VHF Antenna Splitter and your AIS WatchMate or VHF Radio. Features: 2 x PL259 connectors 2M (6.5') long 50 Ω cable This cable can be used as a patch between the AIS WatchMate and your Vesper Marine antenna splitter.

GPS / VHF Antenna Mount for Self Levelling Radar Mount Single mount for installing an additional GPS / VHF antenna above the radar. Features Attaches to top of radome cradle Fits all standard GPS / VHF antennas with 1? x 14 tpi thread attachment Materials Marine grade 316 stainless steel GPS / VHF Antenna Mount Kit 1 x GPS / VHF mount 2 x M6 x 8mm bolts 2 x M6 spring washers

CX4A Commercial AIS/VHF Antenna Powerful AIS Tuned commercial VHF Antenna that will give you maximum AIS range. Has a SO239 antenna connector in the base of the Antenna and we recommend using this with low loss 50 ohm coax cable such as RG-213 for best performance (not supplied), particularly on long cable runs. A very high quality 3dB AIS tuned GRP antenna which is ideal for professional and super yacht installation. Specifications: 3dB AIS tuned GRP antenna 4ft long Fit 1.25″ commercial grade fixing bases