|
Shakespeare Galaxy 5230
14' VHF 8dB Gain
5/8 wave over 1/2 wave dipole
The ultra-performer, Shakespeares Style 5230 is the most effective 8dB antenna system available anywhere, thanks to its increased signal capture area.
Brass and copper elements for maximum range and efficiency
Stainless steel ferrule with standard 1"-14 thread
Includes 20 feet of RG-8/X cable and a PL-259 connector
Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit
Two sections: Base 94", Tip 74" -
Shakespeare Limited Warranty: 5 years
Technical Specifications:
Frequency:
VHF Marine Band
Bandwidth:
3 MHz within 2.0:1 VSWR
SWR:
nominally 1.5:1 at 156.8 MHz
Impedance:
50 ohms
Gain:
8 dB
Max Input (Watts):
200 watts
DC Ground:
YES
Height (feet):
14
Polarization:
Vertical
|
495.16 |
|
|
Style 4018 VHF 9dB
Phased 1/2-wave elements in a collinear array with a coaxial choking sleeve to suppress cable radiation
The top choice for charter boat captains and experienced sport fishing enthusiasts. This long-distance VHF antenna is rigid enough to stay erect in rough seas, yet exceptionally lightweight.
Brass and copper elements
Chrome-plated brass ferrules
Includes 20' RG-58 cable and a PL-259 connector
Suggested mount: Style 409-R or 410-R Mounting Kit for deck or side mounting
Two sections: base 162", tip 66"
Technical Specifications:
Frequency:
VHF Marine band
Bandwidth:
(within 2.0:1 SWR) 3 MHz
SWR:
1.5:1 at 156.8 MHz
Impedance:
(ohms): 50
Gain:
9 dB
Max Input (Watts):
25
DC Ground:
NO
Termination:
20' RG-58
Height (feet):
19
Polarization:
Vertical
Radiation pattern:
Omni-directional
|
467.51 |
|
|
6500-WB 4FT Broad Band VHF Antenna 3dB
Built for maximum performance, this 4’ broad band antenna is designed to endure the harsh environment and communication requirements in commercial, law enforcement and disaster management applications. Whether you install it on a vessel, base station, or a stationary platform, this antenna provides a host of mounting options to fit your need. No tuning or ground plane required. Cable not included.
Features:
Stainless steel mounting bracket: corrosion resistant even in marine environments.
Patent pending mount design: install the U-bolts without removing hardware – no more lost hardware
Detachable antenna: handle mounting bracket easily without the weight of the antenna. Mount it on a large variety of Shakespeare® mounts with a 1”-14 thread*
IP67**, high wind rating, wide temperature range, and PU Coating: built to last in rain, sun, ice, dust, water splashes and even corrosive marine environments
*Requires a Shakespeare 4006 double female ferrule (not included).
**When installed as instructed.
|
228.83 |
|
|
476 18.5' Classic VHF Antenna
*THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS
The Shakespeare 476 antenna is a one-section, phased 1/2-wave collinear array, commercial VHF 10dB marine antenna. Designed to get the message through when all others fail, this unique antenna puts the signal on the horizon, providing gain in all directions. For heavy-duty seagoing applications, such as workboats, tugs, tital well service boats, etc. The reduced-length version (now 18'5") has been shortened to maintain performance while making it easier to ship both internationally and domestically.
Built for value without compromising performance or durability, the Classic Series covers the widest variety of vessels in the Shakespeare® family. These antennas keep you connected and meet essential communication needs while offshore.
Features:
Brass and copper elements provide a standard range and reception
Chrome-plated brass or nylon ferrule with standard 1: -14 thread provides for a basic install
Smooth, durable, high-gloss white/fiberglass finish prevents yellowing
VSWR of <1.5:1 at 156.8 MHz
Utilizes 15’ RG 58 cable, PL-259 connector type, unless otherwise noted below*
2-year warranty
Specifications:
Frequency: VHF Marine band
Bandwidth: (within 2.0:1 SWR): 10 MHz
SWR: 1.5:1 at 156.8 MHz
Impedance (ohms): 50 ohms
Gain: 10 dB
Max Input (Watts): 350W
DC Ground: Yes - Read Shorted
Termination: SO-239 connector
Height (feet): 18.5'
Polarization: Vertical
Radiation Pattern: Omni-directional
Suggested Mount: 483 Mast Bracket
|
1020.06 |
|
|
6018-R Phase III VHF Antenna - 17′ 6″ (5.3M) VHF Marine Band 9dB Gain
Good communication over the VHF Marine Band depends on antenna height, quality and dB Gain. This high performing Phase III™ marine antenna is a powerhouse providing all of those necessities in our rugged, high-strength, foam-filled fiberglass radome for stability in high seas, high winds and high speeds.
Features:
Silver-plated outer conductor, copper inner conductor
• Stainless steel mounting sleeve
• Type SO-239 connector inside mounting sleeve for easy mounting and dismounting for stowage
• Suggested mount: Shakespeare® Style 409-R or 410-R Mounting Kit
• Two sections: Base 110″, Tip 110″
Specifications:
Design: Collinear-phased 1/2-wave elements with choking sleeve
Height: 18' (5.48m)
Weight: 20lbs (9kg)
Gain: 8dB
Connector Type: SO-239
Suggested Mounting: 409-R or 410-R
Impedance: 50 ohms
Max Input Power: 150W
DC Grounding: No
Shakespeare Limited Warranty: 8 years
|
797.74 |
|
|
5400-XT Galaxy 4' VHF Antenna
Center-fed 1/2 wave coaxial sleeve
The compact Galaxy® 5400-XT is an outstanding, general purpose 4' antenna of heavy duty construction for general purpose communications. Its at home on T-tops, hard-tops, and other positions aloft, where its small size can deliver maximum range.
Features:
Brass and copper elements for maximum range
Stainless steel ferrule with standard 1"-14 thread
Includes 20' RG-8/X cable and a PL-259 connector
Suggested mount: Shakespeare Style 4187 Ratchet Mount
One section
Shakespeare Limited Warranty: 5 years
Includes FME Cables
Technical Specifications:
Frequency:
VHF Marine Band
Bandwidth:
5 MHz within 2.0:1 VSWR
SWR:
nominally 1.5:1 at 156.8 MHz
Gain:
3 dB
Max Input (Watts):
50 watts
Height (feet):
4
|
182.11 |
|
|
5101 8' Classic VHF Antenna with 15' Cable - Reduced Length Version
END-FED WITH MATCHING STUB
A standard of excellence in an economical antenna! Shakespeare brings you the best of the high-end features in an 8' antenna with a brass element and a smooth, high gloss, polyurethane finish that wont turn yellow in the sun. This antenna delivers not only performance, but superb value.
Features:
Brass and copper elements
Chrome-plated brass ferrule with standard 1"-14 thread
Includes 15' RG-58 cable and a PL-259 connector
Suggested mount: Shakespeare Style 4187 Ratchet Mount, or use a Shakespeare Style 410-R Mounting Kit plus a Style 4008 Extension Mast to form a 16' antenna system
One section
Shakespeare Limited Warranty: 2 years
Technical Specifications:
Frequency: VHF Marine Band
Bandwidth: (within 2.0 1 SWR): 5 MHz
SWR: 1.5:1 at 156.8 MHz
Impedance: (Ohms): 50
Gain: 6 dB
Max. Input (Watts): 50
DC Ground: YES - however, the antenna will read "open circuit" when tested with ohmeter.
Termination: 15' RG-58 cable
Height (feet): 8'
Polarization: Vertical
Radiation pattern: Omni - directional
|
84.59 |
|
|
5309-R 23' Galaxy VHF Antenna
THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS
Phased 1/2 wave elements in collinear array with a band spread matching sleeve and a choking stub to suppress cable radiation
This design invokes all the antenna engineers tricks to produce the clearest possible transmission and reception over the longest range.
Features:
Brass and copper elements
Stainless steel ferrule with standard 1"-14 thread
Includes 20' RG-8/X cable and a PL-259 connector
Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit (pictured mount not included)
Two sections: Base 172", Tip 105"
Twin to: Galaxy Style 5310-A HF/SSB
Shakespeare Limited Warranty: 5 years
Includes FME Cables
Technical Specifications:
Frequency:
VHF Marine Band
Bandwidth:
5 MHz within 2.0:1 VSWR
SWR:
nominally 1.5:1 at 156.8 MHz
Gain:
9 dB
Max Input (Watts):
150 watts
DC Ground:
NO
Height (feet):
23'
Polarization:
Vertical
|
726.34 |
|
|
THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS
Shakespeare Style 4018-M VHF Marine
19' LENGTH, 9dB
PHASED 1/2-WAVE ELEMENTS IN A COLLINEAR ARRAY WITH A COAXIAL CHOKING SLEEVE TO SUPPRESS CABLE RADIATION
Same as Style 4018 with a special sleeve for mast mounting. Used primarily for land-based stations and on commercial vessels.
The top choice for charter boat captains and experienced sport fishing enthusiasts. This long-distance VHF antenna is rigid enough to stay erect in rough seas, yet exceptionally lightweight.
Brass and copper elements
Chrome-plated brass mid section ferrules and aluminum sleeve bottom ferrule
SO-239 connector at base
Suggested mount: Mast mount using supplied 1-1/3" U-bolts. The 4018-M can be strapped to a larger mast if steel banding (not supplied) is used.
Two sections: Base 162"; Tip 66":
Shakespeare Limited Warranty: 2 years
Technical Specifications:
Frequency:
VHF Marine band
Bandwidth:
(within 2.0:1 VSWR) 3 MHz
SWR:
1.5:1 at 156.8 MHz
Impedance:
(ohms): 50
Gain:
9 dB
Max Input (Watts):
25
DC Ground:
NO
Termination:
SO-239
Height (feet):
19
Polarization:
Vertical
Radiation pattern:
Omni-directional
|
477.52 |
|
|
Shakespeare Style 5911 THE STOWAWAY™ Emergency VHF Flex Antenna Unity Gain
LOADED 1/4 WAVE WHIP
Comes packed in a 12™ weather-resistant, plastic tube which can ™stow away™ in an easy-to-reach location for instant emergency capability if your main antenna becomes broken or disabled. Complete with 12' cable, connector, and rubber suction cup for fast, easy mounting to any smooth horizontal surface.
Flexible vinyl outer covering
10™ overall length
Velcro strips for storage included
Technical Specifications:
Frequency:
VHF Marine band
Bandwidth:
N/A
SWR:
Adequate across Marine Band. Precise SWR depends on antenna location
Impedance:
(Ohms): 50
Gain:
Unity
Max Input (Watts):
25
DC Ground:
YES
Termination:
12' RG-58 cable
Height (feet):
10"
Polarization:
Vertical
Radiation pattern:
Omini-directional
|
65.03 |
|
|
Shakespeare Style 5241-R VHF Marine
36" LENGTH 3dB
LOW PROFILE END-FED 1/2-WAVE WITH HEAVY-DUTY WHIP
The perfect choice for bass boats, center console fishing boats, or any vessel where compact size is most important. Comes with a heavy-duty stainless steel whip for extra stability at high speeds. Chrome plated brass canister minimizes de-tuning.
Sealed, tin-plated copper wire coil
Requires mount with center hole for passage of the supplied 15' RG-58 cable.
PL-259 connector included
Stainless steel whip (36")
Suggested mount: Shakespeare Styles 4187, 4188-S, or 4190 Ratchet Mounts
Shakespeare Limited Warranty: 2 years
Technical Specifications:
Frequency:
VHF Marine Band
Bandwidth:
7 MHz
SWR:
1.5:1 at 156.8 MHz
Radiation pattern:
Omni-directional
Gain:
3 dB
Max Input (Watts):
50 watts
DC Ground:
YES
Height (feet):
3
Polarization:
Vertical
|
98.69 |
|
|
GPS / VHF Antenna Mount for Self Levelling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar.
Features
Attaches to top of radome cradle
Fits all standard GPS / VHF antennas with 1? x 14 tpi thread attachment
Materials
Marine grade 316 stainless steel
GPS / VHF Antenna Mount Kit
1 x GPS / VHF mount
2 x M6 x 8mm bolts
2 x M6 spring washers
|
93.83 |
|
|
Grand Slam 800 VHF Antenna Mount
The GS-800 VHF Antenna Mount was created specifically to prevent climbing on the boat gunnel to raise and lower a VHF antenna. Lift and descend the antenna from the safety of the deck from under the top. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater.
Features:
Safe, no-hassle raising and lowering of a VHF antenna
No more climbing on T-tops or gunnels
Machined / Anodized aluminum body
Light brushed finish
Polished Type-316L stainless steel crank handle
Folding crank handle locks flush into base
Threaded shaft for consistent lift and descent
Delrin bearings for smooth operation
Roller bearings in crank assembly
Mounts through up to 2" thick hardtops
Includes 4" x 1/4" round backing plate (hardware not included)
Made in the USA
1-year limited warranty
|
779.99 |
|
|
Grand Slam 850 Electric VHF Antenna Mount
Designed with safety and innovation in mind, boaters can adjust the position of their VHF antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses.
Features:
Standard 1”-14 thread (male) shaft to accept standard VHF antennas
No under-mount clearance required
Machined / Anodized aluminum body with a light brushed finish
Threaded shaft for consistent lift and descent
Delrin bearings for smooth operation
Features removable set screw for manual adjustment
Kit includes drill template and installation instructions
Includes 10” lead for 12-volt DC power supply for lift and descent
Accepts 3A fuse in the main +12 VDC power feed (not included)
Sold individually
Made in the USA
1-year limited warranty
|
899.99 |
|
|
VHF Patch Cable for AIS & VHF Antenna Splitter
This 2M (6.5') patch cable has PL259 connectors that connect the Vesper Marine AIS VHF Antenna Splitter and your AIS WatchMate or VHF Radio.
Features:
2 x PL259 connectors
2M (6.5') long 50 Ω cable
This cable can be used as a patch between the AIS WatchMate and your Vesper Marine antenna splitter.
|
17.99 |
|