Shakespeare Style 5215-C-X SQUATTY BODY® VHF Marine 36" LENGTH, 3dB END-FED 1/2-WAVE STAINLESS STEEL WHIP Same as the Style 5215 but comes with 60' RG-8/X low-loss cable and PL-259 connectors. A favorite with Sailboat owners, this lightweight, low profile, stainless steel antenna is specially designed for masthead mounting. Hermetically sealed, tin-plated copper wire coil Stainless steel body and whip SO-239 connector Includes 60' RG-8/X low-loss cable and PL-259 connectors. Mount: Stainless steel "L" bracket supplied, for mast mounting One section Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency: VHF Marine band Bandwidth: 7 MHz SWR: 1.5:1 @ 156.8 MHz Impedance: (Ohms): 50 Gain: 3 dB Max Input (Watts): 50 DC Ground: NO Termination: 60' RG-8X cable Height (feet): 3' Polarization: Vertical Radiation pattern: Omni-directional

Ampco Fluid End Aluminum Bronze Full Impeller for KC2 1 X 3/4

6500-WB 4FT Broad Band VHF Antenna 3dB Built for maximum performance, this 4’ broad band antenna is designed to endure the harsh environment and communication requirements in commercial, law enforcement and disaster management applications. Whether you install it on a vessel, base station, or a stationary platform, this antenna provides a host of mounting options to fit your need. No tuning or ground plane required. Cable not included. Features: Stainless steel mounting bracket: corrosion resistant even in marine environments. Patent pending mount design: install the U-bolts without removing hardware – no more lost hardware Detachable antenna: handle mounting bracket easily without the weight of the antenna. Mount it on a large variety of Shakespeare® mounts with a 1”-14 thread* IP67**, high wind rating, wide temperature range, and PU Coating: built to last in rain, sun, ice, dust, water splashes and even corrosive marine environments *Requires a Shakespeare 4006 double female ferrule (not included). **When installed as instructed.

476 18.5' Classic VHF Antenna *THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS The Shakespeare 476 antenna is a one-section, phased 1/2-wave collinear array, commercial VHF 10dB marine antenna. Designed to get the message through when all others fail, this unique antenna puts the signal on the horizon, providing gain in all directions. For heavy-duty seagoing applications, such as workboats, tugs, tital well service boats, etc. The reduced-length version (now 18'5") has been shortened to maintain performance while making it easier to ship both internationally and domestically. Built for value without compromising performance or durability, the Classic Series covers the widest variety of vessels in the Shakespeare® family. These antennas keep you connected and meet essential communication needs while offshore. Features: Brass and copper elements provide a standard range and reception Chrome-plated brass or nylon ferrule with standard 1: -14 thread provides for a basic install Smooth, durable, high-gloss white/fiberglass finish prevents yellowing VSWR of <1.5:1 at 156.8 MHz Utilizes 15’ RG 58 cable, PL-259 connector type, unless otherwise noted below* 2-year warranty Specifications: Frequency: VHF Marine band Bandwidth: (within 2.0:1 SWR): 10 MHz SWR: 1.5:1 at 156.8 MHz Impedance (ohms): 50 ohms Gain: 10 dB Max Input (Watts): 350W DC Ground: Yes - Read Shorted Termination: SO-239 connector Height (feet): 18.5' Polarization: Vertical Radiation Pattern: Omni-directional Suggested Mount: 483 Mast Bracket

6018-R Phase III VHF Antenna - 17′ 6″ (5.3M) VHF Marine Band 9dB Gain  Good communication over the VHF Marine Band depends on antenna height, quality and dB Gain. This high performing Phase III™ marine antenna is a powerhouse providing all of those necessities in our rugged, high-strength, foam-filled fiberglass radome for stability in high seas, high winds and high speeds. Features: Silver-plated outer conductor, copper inner conductor • Stainless steel mounting sleeve • Type SO-239 connector inside mounting sleeve for easy mounting and dismounting for stowage • Suggested mount: Shakespeare® Style 409-R or 410-R Mounting Kit • Two sections: Base 110″, Tip 110″ Specifications: Design: Collinear-phased 1/2-wave elements with choking sleeve  Height: 18' (5.48m) Weight: 20lbs (9kg) Gain: 8dB Connector Type: SO-239 Suggested Mounting: 409-R or 410-R Impedance: 50 ohms Max Input Power: 150W DC Grounding: No Shakespeare Limited Warranty: 8 years

5400-XT Galaxy 4' VHF Antenna  Center-fed 1/2 wave coaxial sleeve The compact Galaxy® 5400-XT is an outstanding, general purpose 4' antenna of heavy duty construction for general purpose communications. Its at home on T-tops, hard-tops, and other positions aloft, where its small size can deliver maximum range. Features: Brass and copper elements for maximum range Stainless steel ferrule with standard 1"-14 thread Includes 20' RG-8/X cable and a PL-259 connector Suggested mount: Shakespeare Style 4187 Ratchet Mount One section Shakespeare Limited Warranty: 5 years Includes FME Cables Technical Specifications: Frequency: VHF Marine Band Bandwidth: 5 MHz within 2.0:1 VSWR SWR: nominally 1.5:1 at 156.8 MHz Gain: 3 dB Max Input (Watts): 50 watts Height (feet): 4

5309-R 23' Galaxy VHF Antenna THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS Phased 1/2 wave elements in collinear array with a band spread matching sleeve and a choking stub to suppress cable radiation This design invokes all the antenna engineers tricks to produce the clearest possible transmission and reception over the longest range. Features: Brass and copper elements Stainless steel ferrule with standard 1"-14 thread Includes 20' RG-8/X cable and a PL-259 connector Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit (pictured mount not included) Two sections: Base 172", Tip 105" Twin to: Galaxy Style 5310-A HF/SSB Shakespeare Limited Warranty: 5 years Includes FME Cables Technical Specifications: Frequency: VHF Marine Band Bandwidth: 5 MHz within 2.0:1 VSWR SWR: nominally 1.5:1 at 156.8 MHz Gain: 9 dB Max Input (Watts): 150 watts DC Ground: NO Height (feet): 23' Polarization: Vertical

Shakespeare Squatty Body® Style 5215-AIS 3' (0.9m) VHF Marine Band 3dB End-fed 1/2-wave stainless steel whip Sailboat owners will love this version of their longtime favorite, our Style 5215. Its the same light weight, low-profile, stainless steel antenna, specially designed for masthead mounting and built with extra bandwidth for all popular AIS transceivers. Sealed, tin-plated copper wire coil Designed specifically for AIS transceivers SO-239 connector Stainless steel L-shaped bracket supplied for mounting One section For AIS applications Best applications include: Sailboats Shakespeare 5215-AIS Squatty Body® Specifications Band: VHF Marine Band Antenna Gain: 3dB Max. Input Power: 50 watts SWR: nominally 1.5:1 at 162 MHz Bandwidth: 7 MHz within 2.0:1 VSWR Ferrule: L-bracket and retaining nut, SO-239 connector Polarity: Vertical Impedance: 50 Ohms DC Ground: No DC Ground - The antenna will read open on continuity test. Shakespeare Limited Warranty: 2 years

5101 8' Classic VHF Antenna with 15' Cable - Reduced Length Version END-FED WITH MATCHING STUB A standard of excellence in an economical antenna! Shakespeare brings you the best of the high-end features in an 8' antenna with a brass element and a smooth, high gloss, polyurethane finish that wont turn yellow in the sun. This antenna delivers not only performance, but superb value. Features: Brass and copper elements Chrome-plated brass ferrule with standard 1"-14 thread Includes 15' RG-58 cable and a PL-259 connector Suggested mount: Shakespeare Style 4187 Ratchet Mount, or use a Shakespeare Style 410-R Mounting Kit plus a Style 4008 Extension Mast to form a 16' antenna system One section Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency:    VHF Marine Band Bandwidth:    (within 2.0 1 SWR): 5 MHz SWR:    1.5:1 at 156.8 MHz Impedance:    (Ohms): 50 Gain:    6 dB Max. Input (Watts):    50 DC Ground:    YES - however, the antenna will read "open circuit" when tested with ohmeter. Termination:    15' RG-58 cable Height (feet):    8' Polarization:    Vertical Radiation pattern:    Omni - directional

Shakespeare Galaxy Style 5226-XT - Reduced Length 8' VHF 6dB Gain Collinear-phased 5/8 wave elements EXTRA TOUGH! This antenna is the same as Style 5225-XT( Reduced length version) but with the exclusive Galaxy gloss black finish. It's Shakespeares best maximum range and quality in a great looking Galaxy antenna. The new 5225-XT is Shakespeares classic Style 5225 in a new, stronger, stiffer radome. Its extra tough for use on hard tops, T-tops, radar arches, or wherever its extra resistance to high winds and high speeds is welcome. Brass and copper elements for maximum range and efficiency Stainless steel ferrule with standard 1"-14 thread 20' RG-8/X low-loss cable plus a PL-259 connector Suggested mount: Shakespeare Style 4187 Ratchet Mount One section Shakespeare Limited Warranty: 5 years Technical Specifications: Frequency: VHF Marine Band Bandwidth: 3 MHz within 2.0:1 VSWR SWR: nominally 1.5:1 at 156.8 MHz Impedance: 50 ohms Gain: 6 dB Max Input (Watts): 100 watts DC Ground: YES Height (feet): 8 Polarization: Vertical

Shakespeare Galaxy Style 5018 15'2" VHF 9dB Gain Phased 1/2 wave elements in a collinear array with choking sleeve to suppress cable radiation This highly sophisticated design is outstanding for long distance communications. Extra rugged for salt water durability, and stability in high seas. Surprisingly light weight. Brass and copper elements for maximum range and efficiency Stainless steel ferrule with standard 1"-14 thread 20' RG-8/X low-loss cable plus a PL-259 connector Suggested Mount: Shakespeare Style 409-R or 410-R Mounting Kit (pictured mount not included) Two sectiions 5 Year Warranty Technical Specifications: Frequency: VHF Marine Band Bandwidth: (within 2.0:1 VSWR) 3 MHz SWR: 1.5:1 at 156.8 MHz Max Input (Watts): 150W DC Ground: NO Height (Feet): 15'2" Polarization: Vertical

Shakespeare Style 396-1-AIS VHF Marine AIS 4' LENGTH 3dB 4' MAST MOUNT AIS ANTENNA The 396-1-AIS has been specially designed to meet the broader bandwidth requirements of all popular AIS transceivers. Commercial-grade construction with a mast mounting sleeve. Brass and copper elements SO-239 connector at the base Suggested Mount: U-Bolts included. Can be strapped to a larger mast using steel banding (not supplied) One section Coax cable sold separately Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency: VHF Marine Band Bandwidth within 2.0:1 SWR: 6.0 MHz SWR: 1.5:1 at 156.8 MHz Gain: 3dB Impedance (Ohms): 50 Gain: 3dB Max. Input (Watts): 100 DC Ground: no (will read open-circuit with ohmeter test) Termination: SO-239 at bottom of antenna Height (feet): 4 Polarization: Vertical Radiation pattern: Omni-directional

THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS Shakespeare Style 4018-M VHF Marine 19' LENGTH, 9dB PHASED 1/2-WAVE ELEMENTS IN A COLLINEAR ARRAY WITH A COAXIAL CHOKING SLEEVE TO SUPPRESS CABLE RADIATION Same as Style 4018 with a special sleeve for mast mounting. Used primarily for land-based stations and on commercial vessels. The top choice for charter boat captains and experienced sport fishing enthusiasts. This long-distance VHF antenna is rigid enough to stay erect in rough seas, yet exceptionally lightweight. Brass and copper elements Chrome-plated brass mid section ferrules and aluminum sleeve bottom ferrule SO-239 connector at base Suggested mount: Mast mount using supplied 1-1/3" U-bolts. The 4018-M can be strapped to a larger mast if steel banding (not supplied) is used. Two sections: Base 162"; Tip 66&quot: Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency: VHF Marine band Bandwidth: (within 2.0:1 VSWR) 3 MHz SWR: 1.5:1 at 156.8 MHz Impedance: (ohms): 50 Gain: 9 dB Max Input (Watts): 25 DC Ground: NO Termination: SO-239 Height (feet): 19 Polarization: Vertical Radiation pattern: Omni-directional

Shakespeare Style 5250 Skinny Mini 3 ft. (0.91 M) VHF Marine Band 3dB End-fed 1/2-wave stainless steel whip This compact, lightweight antenna is ideal for vessels where space is limited - bass boats and fishing vessels, for example. Its chrome plated brass canister minimizes de-tuning. Cable and PL-259 connector included. Stainless steel whip Sealed, tin-plated copper wire coil Requires mount with center hole for passage of the supplied 15' RG-58 cable. One section

Style 399-1M VHF 6dB Collinear Phased 5/8-wave with two coaxial chokes to suppress cable radiation The Style 399-1M is the same as the 399-1, but it has a special sleeve for mast mounting. A professional quality antenna in a compact package. This extra-duty antenna combines strength and performance for use where you really need the efficiency of a large antenna, but don't have room for one. Brass and copper elements Chrome-plated brass ferrule with standard 1"-14 thread Aluminum sleeve for mast mounting Suggested mount: 1-1/4" U-bolts are supplied. The 399-1M can be strapped to a larger mast using steel banding (not supplied) Two sections: Base 75"; Tip 39" UPS shippable Technical Specifications: Frequency: VHF Marine band Bandwidth: (within 2.0:1 SWR): 5MHz SWR: 1.5:1 at 156.8 MHz Impedance: (ohms): 50 Gain: 6 dB Max Input (Watts): 100 DC Ground: YES Termination: SO - 239 Height (feet): 9.5 Polarization: Vertical Radiation pattern: Omni-directional