|
SnapIt! Marine H002H Double Drink Holder for Sail & Power Boats
Simply snap one of these unique drink holders onto the horizontal tubing on your boat and put an end to spills on the deck. Interior Dimension 3.6”(2.59” at narrowest point)X 7.35”. Overall Height 8.95”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. (Needs 8" of space between the deck and tube).
|
43.00 |
|
|
SnapIt! Marine V002 Double Drink Holder for Sail & Power Boats
Not just a drink holder! This versatile component holds 2 canned drinks with insulated sleeves, 2 mugs, water bottles or binoculars.
Interior Dimensions 3.625” (3” at the narrowest point) x 7.85”.
Overall Height 3.95”.
Includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm) round tubing. Plus offers the option of bulkhead mount with enclosed screws.
|
29.00 |
|
|
Double Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Interior Dimension 3.625”(2.9” at narrowest point)x7.85”. Overall Height 3.8”. Cutout on top ring can be useful for hanging sunglasses, etc. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
29.00 |
|
|
Double Drink Holder for Power & Sailboats
This Double Drink Holder is sized for canned drinks with insulated sleeves. Interior Dimension 3.625” (2.5” at narrowest point) X 7.85”. Overall Height 3.375”. Order to fit specific tubing size. Can be easily moved to different locations on the boat and stored below to avoid theft. Designed to mount at the “T” intersection of tubes on the handrails, bow or stern pulpits.
|
31.00 |
|
|
SnapIt! Marine M001 Single Drink Holder for Power & Sailboats
Single Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.5”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.
|
23.00 |
|
|
SnapIt! Marine P002 Pontoon Boat Double Drink Holder
Double Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Interior Dimension 3.625”(2.9” at narrowest point)x7.85”. Overall Height 3.86”. Cutout on top ring can be useful for hanging sunglasses, etc. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
29.00 |
|
|
Not just a drink holder! This versatile component holds 2 canned drinks with insulated sleeves, 2 mugs, water bottles or binoculars. Interior Dimensions 3.625”(3” at narrowest point) x 7.85”. Overall Height 3.5”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.
|
29.00 |
|
|
Not just a drink holder! This versatile component holds 2 canned drinks with insulated sleeves, 2 mugs, water bottles or binoculars. Interior Dimensions 3.625”(3” at narrowest point) x 7.85”. Overall Height 3.5”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.
|
29.00 |
|
|
SnapIt! Marine P003 Flush Mount Pontoon Quad Drink Holder
This Quad Drink Holder is sized to fit can drinks with insulated sleeves and many mugs. The mug opening diameter is 3.625”. Interior Dimension are 3.895x8.12”. Overall Height 3.86”. Overall Width 18.4”. Cutouts on top ring can be useful for hanging sunglasses, etc.
Flush mount unit not suited for use in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White
|
62.00 |
|
|
SnapIt! Marine P005 Top Mount Pontoon Quad Drink Holder
Quad Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Mug Opening Diameter 3.625”. Interior Dimension 3.895”(3.45” at narrowest point)x8.12”. Overall Height 3. 6”. Overall Width 18.4”. Top mount unit can be used in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
62.00 |
|
|
Convertible unit functions as a space saving Single or Double Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 4”.
Includes the UniClamp, which fits round tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm). Plus offers the option of bulkhead mount with enclosed screws.
|
36.00 |
|
|
Convertible unit functions as a space saving Single or Double Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 4”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.
|
36.00 |
|
|
Convertible unit functions as a space saving Single or Double Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 4”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.
|
36.00 |
|
|
Light and economical Convertible unit functions as a saving Single or Double Drink Holder sized specifically for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.15”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.
|
25.00 |
|
|
Single Drink Holder for Sail & Power Boats
Single Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.375”. Order to fit specific tubing size. Can be easily moved to different locations on the boat and stored below to avoid theft. Designed to mount at the “T” intersection of tubes on the handrails, bow or stern pulpits.
|
24.00 |
|