Battery Sensor for Siren 3 Monitor battery voltage with the Wireless Battery Sensor, and never worry about a dead battery again. Attach the Battery Connector to one of the boat’s batteries and plug the other end into the Wireless Module. Link the module to the Siren 3 Pro and receive alerts if the battery voltage exceeds or drops below a preset level. Ideal for monitoring multiple batteries on a boat. Features: Compatible with Siren 3 Pro only Includes: Wireless Sensor Module and Battery Connector with 3 feet of wire

Siren 3 Pro Vessel Management Device  Features: Providing the ultimate smart boating experience that keeps you connected to your boat 24/7, regardless of boat size, type or use The Siren 3 Pro provides the modern boating experience by going beyond basic marine GPS, radar & radio solutions to complement your multi-function display (MFD) with Connected Boat® Technology Together with our easy-to-use App plus global cellular & optional satellite connectivity, our smart boat device connects you to your boat anytime, anywhere Make your life easier by controlling your boat's lights, A/C & digital switching systems remotely from the palm of your hand The Siren 3 Pro provides a better boating experience with remote monitoring, helping your boat stay safe, secure & ready to enjoy Standard Features: Battery Monitoring (Can monitor up to 2 battery banks, if additional banks are required the Siren Marine Battery Sensor will need to be added.) GPS Position/Geofence NMEA 2000 Digital Switching 4G LTE Features with Add-On Sensors & Accessories: Engine Metrics Connected Fluid Tanks Security/Entry Bilge High Water Shore Power Temperature Satellite Compatible Wireless Sensors 3.0

Temp Sensor for Siren 3 Monitor the temperature of the cabin, engine room, bait locker, or fridge. Place the Wireless Module in the area that needs to be monitored, link the module to the Siren 3 Pro, and receive alerts if the temperature exceeds or drops below a preset level. The optional temperature probe can be used for measuring the temperature of specific equipment (e.g. engine) or hard-to-reach areas of the boat. Features: Compatible with Siren 3 Pro only Includes: Wireless Sensor Module and Temperature Probe with 3 feet of wire

Entry Sensor for Siren 3 Receive instant notifications if there is unauthorized entry on the boat. Perfect for securing lockers, doors, and hatches. Install the Wireless Module on one side of the door or locker and the Open/Close Magnet on the other side. Link to the Siren 3 Pro and receive alerts when the door or locker is opened or closed. Features: Compatible with Siren 3 Pro only Includes Wireless Sensor Module and Open/Close Magnet

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

  Siren Marine's Connected Boat technology is revolutionizing the boat ownership experience by providing boat owners, fleet operators and boat builders with critical information, peace of mind, and a better boating experience. Track your boat's position, receive alerts when critical events occur, view live video from the boat, access engine metrics, view NMEA information, and control onboard devices remotely.         Specials   Closeouts    Remanufactured    Rebates          

  Siren Marine's Connected Boat technology is revolutionizing the boat ownership experience by providing boat owners, fleet operators and boat builders with critical information, peace of mind, and a better boating experience. Track your boat's position, receive alerts when critical events occur, view live video from the boat, access engine metrics, view NMEA information, and control onboard devices remotely.         Specials   Closeouts    Remanufactured    Rebates          

High Water Sensor for Siren 3 The Wireless High-Water Sensor detects if there is water in the bilge and sends an alert to the Siren Marine App if water has risen above the preset level. Mount the Water Probe at the desired height in the bilge and plug the other end into the Wireless Module. Link the module to the Siren 3 Pro and receive alerts if the boat is taking on water. Features: Compatible with Siren 3 Pro only Includes Wireless Sensor Module and Water Probe with 3 feet of wire

Wiring Cable for Siren 3 The Wiring Cable 2 accessory is used to connect additional wired sensor inputs and to also drive additional outputs to your Siren 3 Pro device. Each wire has unique functionality to support the corresponding sensor. Features: Compatible with Siren 3 Pro only Cable length: 3 ft. Wire length: 6 in. Direct connection to Siren 3 Pro on bottom-right connector on device Outputs: 5 Inputs: 7

120V AC Shore Power Relay - Wired The 120VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel.  This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 120VAC systems. Features: Coil Voltage: 120VAC Contact Current: 10A

Shore Power Relay - 240V The 240VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel. This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 240VAC systems. Features: Coil Voltage: 240VAC Contact Current: 10A Works with MTC and Siren 3 Pro

Siren Marine Audible Alarm The Siren Marine audible alarm produces a powerful beeping sound (105 decibels). The alarm can be connected to one of the outputs on the MTC, which will allow it to be turned on and off from the "switching" section of the Siren Marine App. It can also be mapped to specific inputs (such as a motion sensor) in the app and programmed to turn on automatically. Features: Automatically adjusts to a supply voltage range of 12-80V Waterproof housing with epoxy embedded electronics Wiring is required to any 12V-80V DC power source Easy-to-install universal mounting bracket with slotted holes Works with MTC and Siren 3 Pro Specifications: Material: Heavy-duty plastic housing Waterproof: Yes Voltage: 12V-80V Power: 10W Current: 0.5A Length: 3.9 in (including bracket) Width: 1.5 in Height: 2.57 in Volume: 105 +/- 3dB

PAM4 Wired DC Relay The Siren Marine DC Accessory Relay allows users to control any 12v onboard devices, such as A/C, deck or spreader lights, sirens, or strobe lights. Dimensions: 1.5x0.75x1.19in (box) 11.3in (wire) Relay may be energized across a wide voltage range from 9VDC to 32VDC. Ideal for 12VDC and 24VDC circuits. 20mA operating current is constant across the operating range. Input voltages are polarity-sensitive and diode-protected. Relay is required to power or switch 12V systems that draw more than 1 Amp via the internal outputs of the MTC. Works with MTC and Siren 3 Pro

LinkUp - Intelligent Battery Sensor (IBS) Kit - 12V Batteries are essential for engine starting and operating onboard utilities.  With Veratron’s new Intelligent Battery Sensor (IBS), it’s simple to monitor their status and health in real-time.  The system works with any OceanLink, AcquaLink or NMEA 2000-networked display, and is compatible with the latest glass cockpit systems. The system includes a Veratron LinkUp Gateway Module that enables the Intelligent Battery Sensor to be connected to and compatible with the NMEA 2000 network.  Its internal galvanic isolation decouples the backbone power from the LinkUp power supply, per NMEA requirement. Veratron’s Intelligent Battery Sensor (IBS) measures vital battery parameters: voltage, current and temperature, as well as state of charge, health and function. This provides the essential information needed to plan energy usage aboard and be aware of potential problems. The IBS system monitors a single battery or full bank.  Multiple LinkUp kits can be used to provide data specific to house, starter and system-specific supplies.  It works with 12V starter, gel or AGM battery types. The IBS simply clamps onto the negative pole terminal.  Completely sealed, it has a watertight 3A inline fuse within the housing.  This connects to the NMEA 2000 backbone through the innovative LinkUp Gateway Module and enables Veratron’s numerous sensors to communicate with the network. Configuring a LinkUp gateway is simple using a mobile device and the companion Veratron app available from the App Store and Google Play.  Each module has a built-in passive wireless antenna. The parameters of the sensor are configured to type, instance and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download. Alternatively, LinkUp devices can be configured via NMEA 2000 with the PC Configuration Tool. This method additionally allows for real-time reading of the analog signal. An LED on the device will illuminate, notifying the user that the LinkUp is being configured. *Includes sensor and Link Up Gateway. Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Input Signal - LIN bus Nominal Voltage - 12V *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

LinkUp - Intelligent Battery Sensor (IBS) Kit - 24V Batteries are essential for engine starting and operating onboard utilities.  With Veratron’s new Intelligent Battery Sensor (IBS), it’s simple to monitor their status and health in real-time.  The system works with any OceanLink, AcquaLink, or NMEA 2000-networked display, and is compatible with the latest glass cockpit systems. The system includes a Veratron LinkUp Gateway Module that enables the Intelligent Battery Sensor to be connected to and compatible with the NMEA 2000 network.  Its internal galvanic isolation decouples the backbone power from the LinkUp power supply, per NMEA requirement. Veratron’s Intelligent Battery Sensor (IBS) measures vital battery parameters: voltage, current, and temperature, as well as state of charge, health, and function. This provides the essential information needed to plan energy usage aboard and be aware of potential problems. The IBS system monitors a single battery or full bank.  Multiple LinkUp kits can be used to provide data specific to house, starter, and system-specific supplies.  It works with 12V starter, gel, or AGM battery types. The IBS simply clamps onto the negative pole terminal.  Completely sealed, it has a watertight 3A inline fuse within the housing.  This connects to the NMEA 2000 backbone through the innovative LinkUp Gateway Module and enables Veratron’s numerous sensors to communicate with the network. Configuring a LinkUp gateway is simple using a mobile device and the companion Veratron app available from the App Store and Google Play.  Each module has a built-in passive wireless antenna. The parameters of the sensor are configured to type, instance, and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download. Alternatively, LinkUp devices can be configured via NMEA 2000 with the PC Configuration Tool. This method additionally allows for real-time reading of the analog signal. An LED on the device will illuminate, notifying the user that the LinkUp is being configured. *Includes sensor and Link Up Gateway. Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Input Signal - LIN bus Nominal Voltage - 24V *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.