|
R3-45SW Hand Control Transom Mount - Digital 09MT - 45lb-36"- 12V
The R3 Transom mount is the ultimate in strength, rigidity and durability. The aluminum alloy construction and stainless steel hinge pins make it one of the most powerful and durable trolling motors available. A classic 5 speeds forward/2 speeds reverse controls and reversible motor head create a dependable yet versatile motor. Put the control at your fingertips with the R3's ergonomic extending handle and a durable multi-position angle adjustment aluminum mount.
The R3 transom mount features aluminum alloy construction with a rugged powder coat finish.
Digital Power Management Technology
MotorGuide Digital Power Management Technology delivers precise variable speed control and longer run time. This technology monitors your motor's amp-draw, heat dissipation, output, and other vital parameters, resulting in a cooler-running, more durable motor with an extended service life. Digital Power Management is a self-contained, sealed module in the lower unit that brings all vital motor components together in one protected location, while eliminating outdated analog circuit boards and their related components. This technology allows you to dial into the precise speed you are searching for, and in turn results in longer lasting battery life.
Industry Leading Transom Mount
he R3 transom mount features aluminum allow construction with a rugged powder coat finish. Stainless hings pins provide the ultimate in strength, rigidity and durability. Includes an easy-to-use tilt/stow/deploy mechanism and swing over knobs on the clamp screws, allowing you to lock the motor to the transom.
Twist-Tiller Operation
Put the control at your fingertips with the R3's ergonomic extending handle and a durable multi-position angle adjustment aluminum mount.
Features:
Digital Power Management Technology
45 pounds of thrust with 12-volt power
5 speeds forward and 2 reverse
Reversible motor head for bow or transom mount operation
Quiet, smooth operation lets you get closer to the fish.
Ergonomic, extending handle puts control at your fingertips
Taper-Lock Mount with 7-point adjustment
Composite shaft provides strength and durability
Solid aluminum and steel lower unit with powder coat finish
Stainless steel propeller shaft
Powerful lower unit runs cooler and lasts longer
One-touch, rapid slide-depth adjustment collar
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
347.99 |
|
|
R3-55 Hand Control Transom Mount - Digital 09MT - 55lbs-36"-12V
The R3 Transom mount is the ultimate in strength, rigidity and durability. The aluminum alloy construction and stainless steel hinge pins make it one of the most powerful and durable trolling motors available. Put the control at your fingertips with the R3's ergonomic extending handle and a durable multi-position angle adjustment aluminum mount.
The R3 transom mount features aluminum alloy construction with a rugged powder coat finish.
Digital Power Management Technology
MotorGuide Digital Power Management Technology delivers precise variable speed control and longer run time. This technology monitors your motor's amp-draw, heat dissipation, output, and other vital parameters, resulting in a cooler-running, more durable motor with an extended service life. Digital Power Management is a self-contained, sealed module in the lower unit that brings all vital motor components together in one protected location, while eliminating outdated analog circuit boards and their related components. This technology allows you to dial into the precise speed you are searching for, and in turn results in longer lasting battery life.
Industry Leading Transom Mount
The R3 transom mount features aluminum allow construction with a rugged powder coat finish. Stainless hings pins provide the ultimate in strength, rigidity and durability. Includes an easy-to-use tilt/stow/deploy mechanism and swing over knobs on the clamp screws, allowing you to lock the motor to the transom.
Twist-Tiller Operation
Put the control at your fingertips with the R3's ergonomic extending handle and a durable multi-position angle adjustment aluminum mount.
Features:
Digital Power Management Technology
Variable dpeed control
Reversible motor head for bow or transom mount operation
Quiet, smooth operation lets you get closer to the fish
Ergonomic, extending handle puts control at your fingertips
Taper-Lock Mount with 7-point adjustment
Composite shaft provides strength and durability
Solid aluminum and steel lower unit with powder coat finish
Stainless steel propeller shaft
Powerful lower unit runs cooler and lasts longer
One-touch, rapid slide-depth adjustment collar
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
305.99 |
|
|
R3-55 Hand Control Transom Mount - Digital 09MT - 55lbs-42"-12V
The R3 Transom mount is the ultimate in strength, rigidity and durability. The aluminum alloy construction and stainless steel hinge pins make it one of the most powerful and durable trolling motors available. Put the control at your fingertips with the R3's ergonomic extending handle and a durable multi-position angle adjustment aluminum mount.
The R3 transom mount features aluminum alloy construction with a rugged powder coat finish.
Digital Power Management Technology
MotorGuide Digital Power Management Technology delivers precise variable speed control and longer run time. This technology monitors your motor's amp-draw, heat dissipation, output, and other vital parameters, resulting in a cooler-running, more durable motor with an extended service life. Digital Power Management is a self-contained, sealed module in the lower unit that brings all vital motor components together in one protected location, while eliminating outdated analog circuit boards and their related components. This technology allows you to dial into the precise speed you are searching for, and in turn results in longer lasting battery life.
Industry Leading Transom Mount
The R3 transom mount features aluminum allow construction with a rugged powder coat finish. Stainless hings pins provide the ultimate in strength, rigidity and durability. Includes an easy-to-use tilt/stow/deploy mechanism and swing over knobs on the clamp screws, allowing you to lock the motor to the transom.
Twist-Tiller Operation
Put the control at your fingertips with the R3's ergonomic extending handle and a durable multi-position angle adjustment aluminum mount.
Features:
Digital Power Management Technology
Variable dpeed control
Reversible motor head for bow or transom mount operation
Quiet, smooth operation lets you get closer to the fish
Ergonomic, extending handle puts control at your fingertips
Taper-Lock Mount with 7-point adjustment
Composite shaft provides strength and durability
Solid aluminum and steel lower unit with powder coat finish
Stainless steel propeller shaft
Powerful lower unit runs cooler and lasts longer
One-touch, rapid slide-depth adjustment collar
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
317.99 |
|
|
R3-45 Hand Control Transom Mount - 09MT - 45lbs-36"-12V
The R3 Transom mount is the ultimate in strength, rigidity and durability. The aluminum alloy construction and stainless steel hinge pins make it one of the most powerful and durable trolling motors available. A classic 5 speeds forward/2 speeds reverse controls and reversible motor head create a dependable yet versatile motor. Put the control at your fingertips with the R3's ergonomic extending handle and a durable multi-position angle adjustment aluminum mount.
The R3 transom mount features aluminum alloy construction with a rugged powder coat finish.
Industry Leading Transom Mount
The R3 transom mount features aluminum allow construction with a rugged powder coat finish. Stainless hings pins provide the ultimate in strength, rigidity and durability. Includes an easy-to-use tilt/stow/deploy mechanism and swing over knobs on the clamp screws, allowing you to lock the motor to the transom.
Twist-Tiller Operation
Put the control at your fingertips with the R3's ergonomic extending handle and a durable multi-position angle adjustment aluminum mount.
Features:
5 speeds forward and 2 reverse
Reversible motor head for bow or transom mount operation
Quiet, smooth operation lets you get closer to the fish
Ergonomic, extending handle puts control at your fingertips
Taper-Lock Mount with 7-point adjustment
Composite shaft provides strength and durability
Solid aluminum and steel lower unit with powder coat finish
Stainless steel propeller shaft
Powerful lower unit runs cooler and lasts longer
One-touch, rapid slide-depth adjustment collar
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
215.99 |
|
|
R3-40 Hand Control Transom Mount - 03MT - 40lbs-36"-12V
The R3 Transom mount is the ultimate in strength, rigidity and durability. The aluminum alloy construction and stainless steel hinge pins make it one of the most powerful and durable trolling motors available. A classic 5 speeds forward/2 speeds reverse controls and reversible motor head create a dependable yet versatile motor. Put the control at your fingertips with the R3's ergonomic extending handle and a durable multi-position angle adjustment aluminum mount.
The R3 transom mount features aluminum alloy construction with a rugged powder coat finish.
Industry Leading Transom Mount
The R3 transom mount features aluminum allow construction with a rugged powder coat finish. Stainless hings pins provide the ultimate in strength, rigidity and durability. Includes an easy-to-use tilt/stow/deploy mechanism and swing over knobs on the clamp screws, allowing you to lock the motor to the transom.
Twist-Tiller Operation
Put the control at your fingertips with the R3's ergonomic extending handle and a durable multi-position angle adjustment aluminum mount.
Features:
5 speeds forward and 2 reverse
Reversible motor head for bow or transom mount operation
Quiet, smooth operation lets you get closer to the fish
Ergonomic, extending handle puts control at your fingertips
Taper-Lock Mount with 7-point adjustment
Black painted aluminum shaft
Solid aluminum and steel lower unit with powder coat finish
Stainless steel propeller shaft
Powerful lower unit runs cooler and lasts longer
One-touch, rapid slide-depth adjustment collar
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
198.83 |
|
|
R3-30 Hand Control Transom Mount - 03MT - 30lbs-30"-12V
The R3 Transom mount is the ultimate in strength, rigidity and durability. The aluminum alloy construction and stainless steel hinge pins make it one of the most powerful and durable trolling motors available. A classic 5 speeds forward/2 speeds reverse controls and reversible motor head create a dependable yet versatile motor. Put the control at your fingertips with the R3's ergonomic extending handle and a durable multi-position angle adjustment aluminum mount.
The R3 transom mount features aluminum alloy construction with a rugged powder coat finish.
Industry Leading Transom Mount
The R3 transom mount features aluminum allow construction with a rugged powder coat finish. Stainless hings pins provide the ultimate in strength, rigidity and durability. Includes an easy-to-use tilt/stow/deploy mechanism and swing over knobs on the clamp screws, allowing you to lock the motor to the transom.
Twist-Tiller Operation
Put the control at your fingertips with the R3's ergonomic extending handle and a durable multi-position angle adjustment aluminum mount.
Features:
5 speeds forward and 2 reverse
Reversible motor head for bow or transom mount operation
Quiet, smooth operation lets you get closer to the fish
Ergonomic, extending handle puts control at your fingertips
Taper-Lock Mount with 7-point adjustment
Black painted aluminum shaft
Solid aluminum and steel lower unit with powder coat finish
Stainless steel propeller shaft
Powerful lower unit runs cooler and lasts longer
One-touch, rapid slide-depth adjustment collar
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
119.99 |
|
|
X3-55SW Salt Water Digital Hand Control Bow Mount Trolling Motor - 55lbs-50"-12V
The X3 trolling motor, designed to deliver better performance and durability for anglers looking for the best value in the 40 to 70 pound thrust range. The X3 is a rugged trolling motor constructed with durable components and loaded with premium features, like our Variable Ration Steering (VRS) technology. The motor comes in foot-and hand-operated models, with available digital power management technology for smooth operation and longer battery life. The X3’s winning combination of performance and value makes it a popular choice for serious anglers.
Updated Mount
The X3 mounting bracket is built tough with aircraft-grade extruded aluminium to minimize flex and provide precision control under high-thrust.
Improved rigidity and durability
Easier to stow and deploy
Wider base for added stability
Stainless steel bushings in key wear points
Easy motor height adjustment and motor removal
Rugged Composite Shaft
The new larger diameter shafts are rugged and corrosion resistant, paired with a durable stainless steel outer shaft. Special composite construction provides greater impact protection and is backed by a lifetime factory warranty.
Precision Response Steering
The X3 offers best-in-class steering performance. A dual cable pull-pull steering system eliminates slack, while the innovative patent-pending Variable Ratio Technology reduces torque steer feedback and improves responsiveness. A newly designed and reinforced foot pedal also provides better feel and control.
Variable Ratio Technology
Improves steering response
Reduces torque steer feedback
Dual-cable system eliminates steering slop and noise
Precision bearings and locking collar eliminates shaft clicking
Composite Locking Pins
By improving these frequently worn parts with modern composite materials we have exponentially increased durability at the most common failure point. The all new pins also eliminate annoying metal-on-metal "clicking" which only adds to the already stealthy nature of the x3.
Features
Durability means reliability - rigid aircraft-grade aluminum mount, stainless steel bushings and outer shaft, and composite shaft with a lifetime guarantee
Quiet on the water - fewer metal-to-metal interfaces, precision bearings, and new composite locking pins eliminate more noise and ensure noise-free operation over time
Precision Response Steering - The X3 offers best-in-class steering performance. A dual cable pull-pull steering system eliminates slack, while the innovative patent-pending Variable Ratio Steering technology reduces torque steer feedback and improves responsiveness. A newly designed and reinforced foot pedal also provides better feel and control.
Composite Locking Pins - By improving these frequently worn parts with modern composite materials we have exponentially increased durability at the most common failure point. The all new pins also eliminate annoying metal-on-metal "clicking" which only adds to the already stealthy nature of the x3.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
784.87 |
|
|
X3 Trolling Motor - Freshwater - Hand Control-Bow Mount - 45lbs-50"-12V
Motorguide is excited to introduce the X3 trolling motor designed to deliver better performance and durability for anglers looking for the best value in the 40- to 70-pound thrust range. The X3 offers best-in-class steering performance.
Features
Durability means reliability - rigid aircraft-grade aluminum mount, stainless steel bushings and outer shaft, and composite shaft with a lifetime guarantee
Quiet on the water - fewer metal-to-metal interfaces, precision bearings, and new composite locking pins eliminate more noise and ensure noise-free operation over time
The X3 mounting bracket is built tough with aircraft-grade extruded aluminium to minimize flex and provide precision control under high-thrust.
Improved rigidity and durability
Easier to stow and deploy
Wider base for added stability
Stainless steel bushings in key wear points
Easy motor height adjustment and motor removal
Rugged Composite Shaft
The larger diameter shafts are rugged and corrosion resistant, paired with a durable stainless steel outer shaft. Special composite construction provides greater impact protection and is backed by a lifetime factory warranty.
Composite Locking Pins
By improving these frequently worn parts with modern composite materials we have exponentially increased durability at the most common failure point. The pins also eliminate annoying metal-on-metal "clicking" which only adds to the already stealthy nature of the X3.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
365.99 |
|
|
X3 Trolling Motor - Freshwater - Hand Control-Bow Mount - 55lbs-50"-12V
Motorguide is excited to introduce the X3 trolling motor designed to deliver better performance and durability for anglers looking for the best value in the 40- to 70-pound thrust range. The X3 offers best-in-class steering performance.
Features
Durability means reliability - rigid aircraft-grade aluminum mount, stainless steel bushings and outer shaft, and composite shaft with a lifetime guarantee
Quiet on the water - fewer metal-to-metal interfaces, precision bearings, and new composite locking pins eliminate more noise and ensure noise-free operation over time
The X3 mounting bracket is built tough with aircraft-grade extruded aluminium to minimize flex and provide precision control under high-thrust.
Improved rigidity and durability
Easier to stow and deploy
Wider base for added stability
Stainless steel bushings in key wear points
Easy motor height adjustment and motor removal
Rugged Composite Shaft
The larger diameter shafts are rugged and corrosion resistant, paired with a durable stainless steel outer shaft. Special composite construction provides greater impact protection and is backed by a lifetime factory warranty.
Composite Locking Pins
By improving these frequently worn parts with modern composite materials we have exponentially increased durability at the most common failure point. The pins also eliminate annoying metal-on-metal "clicking" which only adds to the already stealthy nature of the X3.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
599.99 |
|
|
XM 9 MDI T MEGA Down Imaging Transom Mount Transducer
Transom-mounted Digital CHIRP Dual Spectrum 2D CHIRP with 25° and 42° coverage @ -10dB, 455/800/MEGA MEGA DI CHIRP with 45° and 75° @ -10dB Down Imaging transducer accessory.
Features:
Transom-mounted transducer
Only compatible with MEGA DI HELIX models
1-Year Limited Warranty
20 foot cable length
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
200.00 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Endura Max 45 Trolling Motor - Transom Mount - 12V - 45lb - 36"
Endura is trusted worldwide as the most durable, reliable, and hard-working transom-mount motor on the water. And Endura Max takes that legacy to a new level, adding the Digital Maximizer to help the motor run up to five times longer on a single charge.
Lever Lock Bracket
This solid 10-position bracket features a quick-release lever lock and reinforced composite material that resists flexing, warping, and UV damage.
Telescoping Tiller
Get easy, comfortable, intuitive operation of your trolling motor with the six-inch telescoping tiller, including finite adjustment of forward and reverse speed settings.
Digital Maximizer™
Trolling motors equipped with Digital Maximizer™ provide up to 5 times longer run times on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Push-to-Test Battery Meter
Press a button on the trolling motor head to get an instant status on how much battery life you have left.
Power Prop
For 3-1/4" motor diameters, this prop delivers extra power to push through heavy vegetation. Includes a prop pin, nut, and washer.
Indestructible Composite Shaft — Guaranteed for Life
At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and we guarantee it for life.
Cool, Quiet Power
Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.
Specifications:
For Use In: Freshwater
Shaft Length: 36"
Max Thrust: 45 lbs.
Voltage: 12v
Mounting Location: Transom-Mount
Motor Style: Hand-steer
Control: Hand / Tiller
Power Trim: No
Speeds: Variable
Digital Maximizer: Yes
Battery Meter: Yes
Max Amp Draw: 42
|
290.41 |
|
|
Xi3-45FW - Bow Mount Trolling Motor - Wireless Control - 45lb-48"-12V
Locked, Loaded, and Ready to Stay on Fish.
There are plenty of reasons to fish with the new Xi3. For starters, it has wireless control out of the box–so there’s no need for an expensive add-on. Right from the start you’ll be fishing from anywhere on the boat with the convenient hand-held remote. You’ll also get best-in-class quiet operation that’s up to 40% quieter than the leading competitor. With our SecureStep system, stowing and deploying the Xi3 is safe and easy. Releasing the motor from its locked position, and raising it to stow and go, takes just a single step on the release lever from a comfortable standing position.
Convenient Release Lever
Large release lever triggers both stow and deploy functions from a standing position for easy and safe operation. Visual and audible cues indicate when the motor is locked in the stowed position.
Compact Hand-held Remote
Compact hand-held remote controls the Xi3 from anywhere on the boat. A wireless foot pedal is available as an accessory.
Easy to read LED dashboard
LED status indicators help you monitor four key motor functions at a glance, including three levels of battery life.
Run the Digital Difference.
Smooth and precise variable speed control from 0% - 100% throttle and extended battery life (up to five times longer) are two reasons why more anglers are choosing motors with our Digital Power Management technology. Digital’s highly efficient, state of the art components run at lower temperatures, which means more thrust to the motor. Plus, smart safeguards protect the motor when operating under severe conditions
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
766.60 |
|
|
Riptide Transom Saltwater Trolling Motor
Transom Mount
Hand Control
Rebuilt with an intuitive, easy-to-use design, the Riptide Transom delivers power and precision maneuverability. With a push-to-test battery meter, the battery-extending power of Digital Maximizer (on select models) and unmatched corrosion protection, Riptide Transom means fish are out of places to hide.
Steering Control
Telescoping Handle: Six-inch telescoping handle provides comfortable, easy steering.
Push-to-Test Battery Meter
This convenient battery meter tells you how much battery life you have left - at the push of a button.
Propeller
Power Prop: Delivers extra power to help you push through heavy vegetation to get you where the fish are.
Saltwater Advantage
Advanced Corrosion Protection: Riptide's premium-grade alloys are fortified by a multi-step cleaning process, tough-as-nails armor plating & a durable, saltwater-resistant powder coat paint. With layers of protection, the elements are truly protected.
Fully Encapsulated Electronics: Marine-grade urethane fully encapsulates Riptide control boards to protect the electronic circuitry. All electrical connections are sealed with waterproof heat-shrink tubing to keep saltwater out.
Sacrificial Anode: We use metals that are properly balanced & a composite shaft to ward off galvanic corrosion. So the only piece left for saltwater to attack is this little zinc anode, which absorbs corrosion so the rest of the motor doesn't have to.
Advantage Minn Kota
Indestructible Composite Shaft: Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won’t break, kink or corrode. That’s why we’re confident enough to guarantee it for life.
Cool, Quiet, Power: Nothing runs cooler or quieter than a Minn Kota. Our extra large windings and commutators dissipate heat, resulting in cooler operation, extended battery power, and longer motor life. And our unique bearing system reduces friction to cut fish-spooking noise.
2-Year Warranty
This motor is backed up with Minn Kota’s two-year warranty.
Specifications
Control: Telescoping Handle
Volts: 12
Max Thrust: 45 lbs.
Shaft Length: 36"
Speed Control: Variable
Max. Amp Draw: 50
Prop: Power Prop (MKP-2)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
405.64 |
|
|
Edge 45 - Hand Control - 12V-45lb-45"
Don't let the size fool you. Edge's compact mount is built with extruded, anodized aluminum for rugged, no-nonsense strength. Add a rock-solid Latch & Door mount and an impact resistant composite head, and you have a motor that's perfect for smaller boats and big days on the water.
Features:
Latch & Door Bracket: This bracket gives you a rock-solid hold while stowing your trolling motor and makes for easy removal at the end of the day.
5-Speed Settings: Choose from five speed settings to dial in the right speed control when you're trolling.
Directional Indicator: Easy-to-read directional indicator is built into the top of the trolling motor head on Edge foot control models.
Power Prop: For 3-1/4" motor diameters, this prop delivers extra power to push throw heavy vegetation. Includes prop pin, nut and washer.
Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It's a Minn Kota exclusive, and we guarantee it for life.
Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
What's Included: Edge 45 lb. 45" hand-control trolling motor, MKP-2 Prop, Hold Down Strap and Mounting Hardware.
Specifications:
Control: Hand
Volts: 12
Max Thrust: 45 lbs.
Shaft Length: 45"
Speed Control: 5-Speed
Max. Amp Draw: 42
Prop: Power Prop (MKP-2)
|
356.84 |
|