No Slide Metal/Composite Bonder Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping. Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used. Features: Revolutionary Adhesive Parts Stay Where Placed Without Sliding For Use Overhead and on Vertical Surfaces No Need for Fixtures

No Slide Metal/Composite Bonder - Case of 10 Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping. Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used. Features: Revolutionary Adhesive Parts Stay Where Placed Without Sliding For Use Overhead and on Vertical Surfaces No Need for Fixtures Case of 10

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

Executive Adhesive & Fastener Kit w/AT-8040 Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastic Or Rubber. AT-8040 Will Hold Even Our Heaviest Parts on a Vertical or Overhead Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225°. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 1 year. The Weld Mount System Eliminates The Need To Drill Into Cored Composites Which Can Result In Hull & Deck Delaminations. No Need To Drill, Tap, or Weld When Used On Metal Surfaces. Great For Mounting Electronics, Wire Runs, Bilge Applications, Water Separators, Battery Switches, Etc. The AT-1001003 Kit Contains: (1) AT-8040 - No Slide Multi Bonder Acrylic Adhesive <(1) AT-300 - Dispensing Gun (10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive (100) AT-5 - Large White Cable Tie Mount (50) AT-3 - Small White Cable Tie Mount (4) AT-113 - Large Footman's Strap (10) PS62-832-16SS - 1.00" Long Panel Stud (4) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base (4) ST125-1420-24SS - 1.50" Long Stud With 1/4 x 20 Threads 1.25" Base (4) ST125-1024-12SS - .75" Long Stud With #10 x 24 Threads 1.25" Base (4) ST125-1024-24SS - 1.50" Long Stud With #10 x 24 Threads 1.25" Base (1) Plano Storage Box 14" x 9" x 2.75" Step By Step Instructions

Industrial Kit with AT-8040 Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy "Durham" Metal Box Which Is A Standard Rack Mounted System. The Kit Contains 1 Tubes Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastics And Rubber. AT-8040 Will Hold Even Our Heaviest Parts On An Overhead Or Vertical Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225 Degrees. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 1 year. The Weld Mount System Eliminates The Need To Drill And Tap, or Weld When Used On Metal Surfaces. Great for Mounting Wire and Conduit Runs, Electrical Boxes And Other Structural Applications. The AT-7001 Kit Contains: (1) AT-8040 - No Slide Multi Bonder Adhesive With 12 Minute Kick (10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive (1) AT-300 - Adhesive Dispensing Gun (30) AT-3B - Small Black Cable Tie Mount (100) AT-5B - Large Black Cable Tie Mount <(25) AT-5 - Large White Cable Tie Mount (25) AT-7 - Aluminum Base Swivel Wire Tie Mount (25) AT-9 - Aluminum Wire Tie Mount (2) AT-113 - Large Footman's Strap White (2) AT-113B - Large Footman's Strap Black (6) ST125-1420-12SS - 0.75" Long Stud With 1/4 x 20 Threads 1.25" Base (6) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base (6) ST125-1024-12SS - 0.75" Long Stud With #10 x 24 Threads 1.25" Base (6) ST125-1024-20SS - 1.25" Long Stud With #10 x 24 Threads 1.25" Base (2) SHC-1000 - Single Hose Clamp 1.00" (2) DHC-1000 - Double Hose Clamp 1.00" (1) Storage Box - Durham Manufacturing 18.5' x 12.5" x 3.25" Step By Step Instructions

Industrial Kit - No Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy "Durham" Metal Box Which Is A Standard Rack Mounted System. The Weld Mount System Eliminates The Need To Drill And Tap, or Weld When Used On Metal Surfaces. Great for Mounting Wire and Conduit Runs, Electrical Boxes And Other Structural Applications. The AT-7008 Kit Contains: (10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive (1) AT-300 - Adhesive Dispensing Gun (30) AT-3B - Small Black Cable Tie Mount (100) AT-5B - Large Black Cable Tie Mount (25) AT-5 - Large White Cable Tie Mount (25) AT-7 - Aluminum Base Swivel Wire Tie Mount (25) AT-9 - Aluminum Wire Tie Mount (2) AT-113 - Large Footman's Strap White (2) AT-113B - Large Footman's Strap Black (6) ST125-1420-12SS - 0.75" Long Stud With 1/4 x 20 Threads 1.25" Base (6) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base (6) ST125-1024-12SS - 0.75" Long Stud With #10 x 24 Threads 1.25" Base (6) ST125-1024-20SS - 1.25" Long Stud With #10 x 24 Threads 1.25" Base (2) SHC-1000 - Single Hose Clamp 1.00" (2) DHC-1000 - Double Hose Clamp 1.00" (1) Storage Box - Durham Manufacturing 18.5' x 12.5" x 3.25" Step By Step Instructions

Executive Fastener Kit - No Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Does NOT Contain Acrylic Adhesive The Weld Mount System Eliminates The Need To Drill Into Cored Composites Which Can Result In Hull & Deck Delaminations. No Need To Drill, Tap, or Weld When Used On Metal Surfaces. Great For Mounting Electronics, Wire Runs, Bilge Applications, Water Separators, Battery Switches, Etc. The AT-1001008 Kit Contains: (1) AT-300 - Dispensing Gun (10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive (100) AT-5 - Large White Cable Tie Mount (50) AT-3 - Small White Cable Tie Mount (4) AT-113 - Large Footman's Strap (10) PS62-832-16SS - 1.00" Long Panel Stud (4) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base (4) ST125-1420-24SS - 1.50" Long Stud With 1/4 x 20 Threads 1.25" Base (4) ST125-1024-12SS - .75" Long Stud With #10 x 24 Threads 1.25" Base (4) ST125-1024-24SS - 1.50" Long Stud With #10 x 24 Threads 1.25" Base (1) Plano Storage Box 14" x 9" x 2.75" Step By Step Instructions

Acrylic Adhesive CAN NOT SHIP AIR,UPS GROUND ONLY AT-6030 is a 10 to 1 metal bonding adhesive. It has high viscosity and cures in 10 - 12 minutes, has a 6 minute working time and develops working strength in 40 minutes. AT-6030 develops in excess of 2,500 lbs (psi) tensile strength on most metal surfaces making it an ideal alternative to welding in many applications. AT-6030 has a 6 month shelf life and should always be stored refrigerated. Packaged in a 38ml cartridge this adhesive must be used with our AT-301gun, AT-12 plunger and and AT-650 mixing tips. The 38ml cartridge will bond 80 - 120 parts.

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.250" Stud Required: ST125-1420-12SS Clamp Dimensions L/W/D: 0.87" x 0.47" x 0.41" Recommended Clamp Spacing: 3'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.375" Stud Required: ST125-1420-16SS Clamp Dimensions L/W/D: 1.06" x 0.63" x 0.56" Recommended Clamp Spacing: 3'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.5" Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89" Recommended Clamp Spacing: 4'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.625" Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89" Recommended Clamp Spacing: 4'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.75" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 4'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 1.0" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 5'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.25" Stud Required: ST125-1420-12SS Clamp Dimensions L/W/D: 1.22" x 0.47" x 0.41" Recommended Clamp Spacing: 3'