18" Radar Mast Platform Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. Adjustable Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast. Incredible Strength The solid under body construction not only greatly improves strength but also hides radar cables. On certain models. Accessories Pre-drilled under body allows for flood lights or horns to be mounted on certain models. Compatible Manufacturers: B&G Garmin Humminbird Lowrance Raymarine SImrad

Universal Mast Mount Platform for 12"18" Radome Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. Adjustable Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast. Incredible Strength The solid under body construction not only greatly improves strength but also hides radar cables. On certain models. Accessories Pre-drilled under body allows for flood lights or horns to be mounted on certain models. Compatible Manufacturers: Furuno JRC Koden Lorenz Sitex VDO

Universal 24" Radar Mast Platform Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. Adjustable Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast. Incredible Strength The solid under body construction not only greatly improves strength but also hides radar cables. On certain models. Accessories Pre-drilled under body allows for flood lights or horns to be mounted on certain models. Compatible Manufacturers: Furuno Garmin JRC Koden KVH Raymarine Simrad Sitex

22.5" Dual Mount for Up To 4.5' Open Array Radar - Top for Sat Domes - Top Plate Required  Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management. Compact Design Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Eliminate Interference A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation. Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount. Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately*

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

Mast Platform for KVH M7/TV6 & Intellian i6/D6 Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. Adjustable Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast. Incredible Strength The solid under body construction not only greatly improves strength but also hides radar cables. On certain models. Accessories Pre-drilled under body allows for flood lights or horns to be mounted on certain models. Compatible Units: Glomex - 20"-27" satdomes Intellian - i5, i6, i6P, S6HD, FB500 and v45C   JRC - JUE 500 (24")  KVH - M7, M7SK, FB500(26"), V7, V7-IP, TV6, HD7 and TV3-IP(24")  Oyster - 50MGS, 75MGS, 77MGS and TRX-7MGS  Raymarine - 60STV  Seatel / Cob Ham - C18 & FX250 (24")  Thrane & Thrane - Sailor FB500 & Fleet 55+  VDO - Ocean Line 345, 360, 445 and 460 

8' Radar Mast Pole Kit with 2 Strut Kits Seaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily disassembled for pole removal. Features: Fixed Top Plate - A Seaview Top Plate is included with each pole kit to fit closed dome radars. No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronic.  Supports - There are several strut supports depending on which Seaview Pole Kit you choose. A rail stand-off kit and a 48" long strut. 48" Struts - Also made from high polished stainless steel are the 48" long struts.  Adjustable Base - A hard anodized adjustable base with a water tight Cable Seal. The adjustable base measures 5-1/4" x 3".  **NON STOCK ITEM DROP SHIPS FROM MANUF. NO PROMO FREIGHT RATES*** This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Mast Bracket with Flybridge Adapter Kit 18" Radar Mast Platform with Flybridge Adapter Kit. Sailboat and Trawler Radar Mast Platforms. Features: Anodized Marine Grade Aluminum and Powder Coated Brilliant White Heavy duty swiveling feet fit most mast and poles adding more strength and durability to platforms Models available for all brands of radomes

IsoMat Mast Platform Adapter This is an adapter for boats with Isomat masts (integral track at the front). This adapter is installed between the platform and the platform mounting feet, and allows the mounting feet to spread out wider.

Tapered Radar Mast Single combintation mount for radar, lights, GPS/VHF antennas, cameras or search lights, with each item perfectly positioned for maximum performance. Undrilled top plate to fit any light For use with Raymarine, Garmin, and Navico BR24, 3G, 4G radar domes Install up to 4 GPS/VHF antenna Hollow wings and stem allow hidden cabling Compatible with all current 18" and 24" radomes(except furuno) Small base footprint (same as Dual PowerTower) Removable 'wings' for safe low cost shipping

DRS12ANXT/3 Radar Pedestal 3' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DRS12ANXT/4 Radar Pedestal 4' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DRS12ANXT/6 Radar Pedestal 4' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DRS25ANXT/3 Radar Pedestal 3' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DRS25ANXT/4 Radar Pedestal 4' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.