Radio Splash Cover The gasket-sealed lid on this splash cover prevents water entry into virtually any marine or spa stereo on the market.  Accommodates any dual post, removable and DIN-style stereos.  Contemporary styling makes it an attractive addition to the dashboard or wall.  The lid lifts easily and stays open in multiple positions to maintain partial splash protection while allowing access to radio controls.  Features: Designed for permanent outdoor mounting  Waterproof design Stainless steel mounting hardware included Specifications: Overall Dimensions: 9 1/16" x 4 3/16" x 1 15/16" (230mm x 106mm x 49mm) *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

Spa Side Smartphone Enclosure with Door - Black PolyPlanar is the leading manufacturer of spa specific audio systems designed in the USA. The Poly-Planar PM2 is designed to end the frustration of where to place your smartphone or MP3 while in the spa.  The sturdy ABS plastic housing was designed to accommodate any smartphone or MP3 player. Suitable for skirt mounting on spas or wall mount on saunas.  Specifications: ABS Plastic Material Water Resistant Enclosure Flip-up cover protects contents Cutout Dimension: 6" (154.5mm) x 3" (78.5mm) Mounting Depth: 3.15" (80mm) *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MRR-21 Wireless Remote The MRR21 Wireless Infrared Remote gives you the freedom to control your Poly-Planar system from any area of your boat.  This small, floating remote comes with an attached lanyard and convenient storage hook.  Features:  For use with PolyPlanar Marine Systems Floating, waterproof design  Usage range 15' (5m) Overall Dimensions  – 3” x 4.5” x 0.75” *Sold as an Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Panel Mount USB Charging Ports - 12V The USB-PM charger with battery voltage indicator is an excellent option for marine, ATV, golf cart or automotive applications.  With an output of up to 5VDC / 3A MAX, the charger can charge smartphones, tablets and GPS devices.  The USB charger supports express charge mode for Android and Apple devices. The dual-port USB design allows user to charge up two devices at the same time while monitoring battery voltage. Applications - Marine, Motorcycle, Scooter, ATV, UTV, rigid inflatable boat, golf cart Features: Applications - Marine, Motorcycle, Scooter, ATV, UTV, rigid inflatable boat, golf cart Dual-Port USB Charger Battery voltage indicator  Waterproof IP66 rated Specifications: Input Voltage -12V DC Output Voltage - 5V/3A Port A - single 2.1A Fast Charger USB port Port B - single 1.0A Fast Charger USB port *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Poly-Flex II Styled-to-Fit Cover for 10.5' Fishing Kayaks Trailerable- Grey *34" Max Beam Width Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature: 1/4″ strong & durable shock cord encased into hem for a snug fit Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover *Trailerable boat covers must be properly installed and tied down. From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you! Poly-Flex II Good Quality Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA

Poly-Flex II Styled-to-Fit Cover for 12.5' Fishing Kayaks Trailerable - Grey *34" Max Beam Width Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature: 1/4″ strong & durable shock cord encased into hem for a snug fit Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover *Trailerable boat covers must be properly installed and tied down. From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you! Poly-Flex II Good Quality Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA

Poly-Flex II Styled-to-Fit Cover for 13.5' Fishing Kayaks Trailerable- Grey *34" Max Beam Width Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature: 1/4″ strong & durable shock cord encased into hem for a snug fit Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover *Trailerable boat covers must be properly installed and tied down. From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you! Poly-Flex II Good Quality Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA

Poly-Flex II Styled-to-Fit Cover for 14.5' Fishing Kayaks Trailerable- Grey *34" Max Beam Width Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature: 1/4″ strong & durable shock cord encased into hem for a snug fit Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover *Trailerable boat covers must be properly installed and tied down. From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you! Poly-Flex II Good Quality Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA

Performance Poly-Guard Crew/4-Seater UTV Cover - Grey *Measurements - 150" x 60" x 74" All Carver Powersport UTV covers are available in long-lasting outdoor performance quality materials. Features: Fit-Specific for UTVs. Available in 3 sizes for the best fit possible. Heavy Duty Elastic 1/4″ Shock Cord encased in the hem for a snug fit. Cover comes standard with the following: 2 – heavy duty tie-down straps Easy Installation Instructions Available in three fabrics: Sun-DURA® - Black (7-Year Warranty), Performance Poly-Guard®(5-Year Warranty) and Camouflage - Mossy Oak® Break Up Country (5-Year Warranty) Performance Poly-Guard® Excellent Quality 100% Marine-grade polyester. Highest tear strength available. 8 oz, strong and durable. UV and mildew resistant. Excellent resistance to fading. Extremely water-resistant w/ durable water repellent, anti-fungal & anti-microbial finish. Breathable to help allow interior moisture to escape. Made in USA. (5 Year Limited Warranty) Design: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Best Warranty in the business based on fabric selection All Carver Covers are made in the USA

Performance Poly-Guard Low Profile Sport UTV Cover - Grey *Measurements - 132" x 64" x 66" All Carver Powersport UTV covers are available in long-lasting outdoor performance quality materials. Features: Fit-Specific for UTVs. Available in 3 sizes for the best fit possible. Heavy Duty Elastic 1/4″ Shock Cord encased in the hem for a snug fit. Cover comes standard with the following: 2 – heavy duty tie-down straps Easy Installation Instructions Available in three fabrics: Sun-DURA® - Black (7-Year Warranty), Performance Poly-Guard®(5-Year Warranty) and Camouflage - Mossy Oak® Break Up Country (5-Year Warranty) Performance Poly-Guard® Excellent Quality 100% Marine-grade polyester. Highest tear strength available. 8 oz, strong and durable. UV and mildew resistant. Excellent resistance to fading. Extremely water-resistant w/ durable water repellent, anti-fungal & anti-microbial finish. Breathable to help allow interior moisture to escape. Made in USA. (5 Year Limited Warranty) Design: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Best Warranty in the business based on fabric selection All Carver Covers are made in the USA

Amplifier Package with ME70BT & MA-8505W Speakers This kit includes the MA-8505W Titanium Series Speakers and the ME70BT IPX6 4-Channel Marine Amplifier. The amplifier and speakers are a perfect replacement or upgrade for existing speakers, and the speaker magnets will not interfere with navigation equipment. Poly-Planar MA-8505W 5" 200 Watt Titanium Series Speakers – White Features: Colorfast plastic frame withstands UV rays Anti-magnetic design Waterproof construction  Rugged powder-coated stainless steel grill 3-way design with mylar tweeter & midrange ASTM UV & Salt Spray Test meets or exceeds 600hrs ME70BT IPX6 4-Channel Marine Amplifier Features: Remote display keypad 4x45 Audio power out 100 Meter Bluetooth range Phone/Android charging USB Music Player AUX input NMEA 2000® certified Multiple EQ preset options Backlit 3-line display with adjustable illumination MA-8505W Specifications: Type - 3-way Coaxial with tweeter Cone Size - 5" (152mm) Peak Power - 200 watts Continuous Power - 100 watts Speaker Impedance - 4 ohm Weight -1.85 lbs per speaker Mounting Depth -  2-7/16" (62mm) Outside Grill - 6" (153mm) Cutout - 4 1/2″ (115mm) Kit Includes: ME70BT IPX6 4-Channel Marine Amplifier (2) Poly-Planar MA-8505W 5" 200 Watt Titanium Series Speakers - White This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Poly-Flex II Styled-to-Fit Cover for 2 Seater Personal Watercrafts - 108" X 45" X 41" - Grey Available in Poly-Flex II®, Sun-DURA® and Sunbrella®. PWC covers come standard with these features: 1/4″ shock cord encased in hem for a snug fit against the hull. Strong, reinforced tie-down loops sewn into cover. Package includes (six) tie-down straps Finished seams – no raw edges Available in Poly-Flex II® in a grey, Sun-DURA® in a choice of 11 colors and Sunbrella® in a choice of 24 colors. Poly-Flex II Good Quality Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA

Poly-Flex II Styled-to-Fit Cover for 2-3 Seater Personal Watercrafts - 116" X 48" X 41" - Grey Available in Poly-Flex II®, Sun-DURA® and Sunbrella®. PWC covers come standard with these features: 1/4″ shock cord encased in hem for a snug fit against the hull. Strong, reinforced tie-down loops sewn into cover. Package includes (six) tie-down straps Finished seams – no raw edges Available in Poly-Flex II® in a grey, Sun-DURA® in a choice of 11 colors and Sunbrella® in a choice of 24 colors. Poly-Flex II Good Quality Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA

Poly-Flex II Styled-to-Fit Cover for 2-3 Seater Personal Watercrafts - 124" X 48" X 44" - Grey Available in Poly-Flex II®, Sun-DURA® and Sunbrella®. PWC covers come standard with these features: 1/4″ shock cord encased in hem for a snug fit against the hull. Strong, reinforced tie-down loops sewn into cover. Package includes (six) tie-down straps Finished seams – no raw edges Available in Poly-Flex II® in a grey, Sun-DURA® in a choice of 11 colors and Sunbrella® in a choice of 24 colors. Poly-Flex II Good Quality Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA