|
Icerette Automatic Ice Cube Maker - Stainless Steel - 230V
The marine environment is harsh for household-type appliances. Keeping that harshness in mind, Raritan developed and designed our ice maker so that it would withstand the vigor of any marine environment. Fully automatic ice-making machine specifically designed and built for marine applications
Features:
Heavy-duty solid stainless steel cabinet and door built to last in harsh marine environments
Improved controls for more efficient operation
Corrosion-resistant marine-grade hardware, hinges, fittings, and fasteners
A positive catch door latch keeps the door closed and allows maximum ice production while keeping harmful bacteria and molds out
Built-in door prop lets you manually defrost or air-dry your unit when power is off
Produces up to 21 lbs of ice every day using only 2-3/4 gallons of water
Stores of up to 11 lbs of crescent ice (1/2" W x 3/4" H x 2-1/2" L)
Each unit is assembled by hand and individually tested
Back by Raritan's 1-Year Limited Warranty and legendary technical support team
Easy Installation:
No drain is required makes it easy and inexpensive to install
Only requires a 1/4" outside diameter water line
Does not require additional hinge clearance for the door swing
Includes flange
No additional side space is required for ventilation
Technical Specifications:
Voltage Range - 220V - 240V
Water Pressure Operating Range (PSI) - 20 - 120
Cutout Dimensions - 14 3/8” W x 24 5/8” H x 16 1/4” D
Ice Production Capacity - 21lbs/24 hrs
Ice Storage Capacity - 11lbs removable ice bucket
|
1426.82 |
|
|
Icerette Automatic Ice Cube Maker - Stainless Steel - 115V
The marine environment is harsh for household-type appliances. Keeping that harshness in mind, Raritan developed and designed our Ice-maker so that it would withstand the vigor of any marine environment. Fully Automatic Ice Making Machine Specifically Designed and Built for the Marine Applications.
Features:
Heavy duty Solid Stainless Steel cabinet and door built to last in harsh marine environments
Improved controls for more efficient operation
Corrosion resistant marine-grade hardware, hinges, fittings, and fasteners
A positive catch door latch keeps the door closed and allows maximum ice production while keeping harmful bacteria and molds out
Built-in door prop lets you manually defrost or air dry your unit when power is off
Produces up to 21 lbs of ice every day using only 2-3/4 gallons of water
Stores of up to 11 lbs of crescent ice (1/2" W x 3/4" H x 2-1/2" L)
Each unit is assembled by hand and individually tested
Back by Raritan's 1-Year Limited Warranty and legendary technical support team
Easy Installation:
No drain is required makes it easy and inexpensive to install
Only requires a 1/4" outside diameter water line
Does not require additional hinge clearance for the door swing
Includes flange
No additional side space is required for ventilation
Technical Specifications:
Voltage Range - 104V - 127V
Water Pressure Operating Range (PSI) - 20 - 120
Cutout Dimensions - 14 3/8” W x 24 5/8” H x 15 1/4” D
Ice Production Capacity - 21lbs/24 hrs
Ice Storage Capacity - 11lbs removable ice bucket
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1319.99 |
|
|
Sailmaker Stainless Steel Thimble - 3mm(1/8") Cable Diameter
Used to create eyes in both rope and wire rope
|
6.17 |
|
|
Sailmaker Stainless Steel Thimble - 4mm(5/32") Cable Diameter
Used to create eyes in both rope and wire rope
|
6.17 |
|
|
Sailmaker Stainless Steel Thimble - 5mm(3/16") Cable Diameter
Used to create eyes in both rope and wire rope
|
7.06 |
|
|
Sailmaker Stainless Steel Thimble - 6mm(1/4") Cable Diameter
Used to create eyes in both rope and wire rope
|
7.92 |
|
|
Sailmaker Stainless Steel Thimble - 8mm(5/16") Cable Diameter
Used to create eyes in both rope and wire rope
|
13.75 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Icerette Icemaker Assembly - 115V for 87 Models Only
Replacement icemaker mold for Raritan 87 model ice makers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
187.50 |
|
|
Raritan I34M-1 Ice Maker Module Board
|
357.50 |
|
|
Applications for the MDX-3-1/2 Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.
March Pump's industrial MDX-3-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 8 gallons per minute at 1 foot, and its maximum head is 19 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, carbon filled Kynar (PVDF), Ryton Buna N, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheitor 87 Celsius. The March MDX-3-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
8.5 GPM
30 LPM
Max Head
19 FT
4 M
Power
.04 HP
.029 KW
Electrical
115V 50/60HZ or 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front Housing and Impeller), Carbon filled Kynar (Rear Housing, Shaft), Ryton (Thrust Washer), Buna N (O-Ring), Stainless Steel (Screw) Ceramic Magnet
|
328.58 |
|
|
March 2CP-MD 230V Pump
The most common application for the 2CP-MD Magnetic Drive Pump is for marine air conditioning and fountains.
March Pump's industrial 2CP-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (or around 5.5PSI). The 2CP-MD pump must be used submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Stainless Steel, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Buna N, and the Cord are also in contact with the solution. The inlet connection is 0.375 inch female pipe thread and 0.75 inch male pipe thread, and the outlet is 0.25 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.028 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius. The March 2CP-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals.
Max Flow 250 GPH 18.5 LPM up to a 6000 BTU Air Conditioner
Max Head 13 FT 2.7 M
Power .028 HP .021 KW
Electrical 230V 50/60HZ
Submersible Yes
Type Centrifugal Mag Drive
Inlet 3/8"FPT & 3/4"MPT
Outlet 1/4"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Stainless Steel (Shaft), Ceramic (Thrust Washer), Ceramic Magnet
Uses Submersible Only
When submerged the following is in contact with the solution Epoxy, Buna N, Cord
|
374.40 |
|
|
March Magnetic Drive Centrifugal Beer Pump 230V
Applications for the March 815-PL Magnetic Drive Pump include hot water systems, solar heating, fryers, beer pump.
March Pump's industrial 815-PL is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 7 gallons per minute at 5 feet, and its maximum head is 18.6 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Unit System 60Hz 50Hz Max Flow
7 GPM
22.7 LPM
Max Head
18.6 FT
4.1 M
Power
.04 HP
.029 KW
Electrical
115V 50/60HZ or 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"MPT
Outlet
1/2"MPT
Wet End
Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
|
352.95 |
|
|
March Mag-Drive Pump 115/230V Cast Iron Flanged Ports
Applications for the 830-CI Magnetic Drive Pump include hot water and hot oil systems.
March Pump's industrial 830-CI is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 15 gallons per minute at 11 feet, and its maximum head is 30.5 Feet (or around 13PSI). The standard wet end (the materials that come into contact with the solution) is composed of Cast Iron, Stainless Steel, Ceramic, Ryton/Teflon/Carbon, and Nitrile/Fibre. The inlet connection is a flange, and the outlet is a flange. The standard motor is a 1 Phase 115/230V 0.2 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Unit System 60Hz 50Hz Max Flow
15 GPM
52.9 LPM
Max Head
30.5 FT
6.5 M
Power
.2 HP
.149 KW
Electrical
115/230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
Flange
Outlet
Flange
Wet End
Cast Iron (Front Housing), Stainless Steel (Rear Housing, Shaft), Ceramic (Thrust Washer), Ryton/Teflon/Carbon (Impeller), Nitrile/Fibre (Gasket)
|
978.30 |
|
|
Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-1/2 Part # 0115-0064-0200 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-1/2 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March AC-1A-MD-1/2 is suitable for your application, please contact March Pump.
Unit System 60Hz 50Hz Max Flow
3 GPM
9 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0200
|
202.80 |
|