5" Oval Stainless Steel Folding Cleat This oval folding cleat incorporates a positive locking feature with an audible click into the open/closed positions for easy rigging. Features: Accommodates up to 1/2 in. line A low-profile ergonomic design makes for a smooth, sleek appearance when closed, limiting trip hazards Constructed of corrosion-resistant investment-cast 316 stainless steel Surface mounted: no cut-outs or hole saws required Installs with two 1/4-20 through bolts (not included) Specifications: Entire Length: 5 in. Folding Cleat Length: 4-5/8 in. Width: 1-11/16 in. Exposed Cleat Height: 1/2 in. Width Between Bolts: 2-11/16 in. Fastener (inch): 1/4 in. FH Finish: Polished Weight: 0.29 lb.

5" Oval Stainless Steel Folding Cleat with Hidden Hex Bolts This oval folding cleat with hidden hex bolts features an innovative design incorporating removable hex bolts vs. welded studs, making bolt length choices easy for the customer. Features: Incorporates a positive locking feature with an audible click into the open/closed positions for easy rigging Accommodates up to 1/2 in. line A low-profile ergonomic design makes for a smooth, sleek appearance when closed, limiting trip hazards Constructed of corrosion-resistant investment-cast 316 stainless steel Packaged Includes: 2 hex bolts, 2 washers, and 2 nuts per cleat Specifications: Entire Length: 5 in. Folding Cleat Length: 4-5/8 in. Width: 1-11/16 in. Exposed Cleat Height: 1/2 in. Width Between Bolts: 2-11/16 in. Bolts (inch): 1/4"-20 x 2" Hex Bolts Finish: Polished Weight: 0.29 lb.

5" Rectangle Stainless Steel Folding Cleat with Hex Bolts This rectangular folding cleat with hidden hex bolts features an innovative design incorporating removable hex bolts vs. welded studs, making bolt length choices easy for the customer.  Features: The drain opening allows water and debris to pass through, reducing corrosion and wear on the cleat Incorporates a positive locking feature with an audible click into the open/closed positions for easy rigging Accommodates up to 1/2 in. line (4-1/2 in. cleat) A low-profile ergonomic design makes for a smooth, sleek appearance when closed, limiting trip hazards Constructed of corrosion-resistant investment-cast 316 stainless steel Packaged Includes: 2 hex bolts, 2 washers, and 2 nuts Specifications: Entire Length: 4-9/16 in. Folding Cleat Length: 4-1/2 in. Width: 1-11/16 in. Exposed Cleat Height: 9/16 in. Width Between Bolts: 2-11/16 in. Bolts (inch): 1/4"-20 x 2" Hex Bolts Finish: Polished Weight: 0.29 lb.

6" Rectangle Stainless Steel Folding Cleat with Hex Bolts This rectangular folding cleat with hidden hex bolts features an innovative design incorporating removable hex bolts vs. welded studs, making bolt length choices easy for the customer.  Features: The drain opening allows water and debris to pass through, reducing corrosion and wear on the cleat Incorporates a positive locking feature with an audible click into the open/closed positions for easy rigging Accommodates up to 5/8 in. line (6 in. cleat) A low-profile ergonomic design makes for a smooth, sleek appearance when closed, limiting trip hazards Constructed of corrosion-resistant investment-cast 316 stainless steel Packaged Includes: 2 hex bolts, 2 washers, and 2 nuts Specifications: Entire Length: 6-1/16 in. Folding Cleat Length: 6 in. Width: 2-3/16 in. Exposed Cleat Height: 11/16 in. Width Between Bolts: 3-1/2 in. Bolts (inch): 5/16 in. -18 x 2 in. Hex Bolts Finish: Polished Weight: 0.59 lb.

Kayak Hatch Cover - VCP Oval The VCP Oval Hatch Cover is a great replacement for lost or damaged lids. This performance hatch features Sea-Dog's unique two-part construction for maximum protection. Designed to float when dropped in the water, the hatch lids are easy to attach while still offering a superior watertight seal. This Sea-Dog VCP Oval Hatch Cover is compatible with the Valley Canoe Products® (VCP) oval hatch when mounted on an injection-molded rim bolted/glued to the deck; it is not recommended for rotomolded kayaks that do not feature this rim. *Sea-Dog® is not affiliated with Valley Sea Kayaks® and/or Kayak Sport®; reference to these brands only indicates similar sizing of hatch cover products. Features: Proudly constructed in the USA of injection molded nylon and polypropylene Lid only Specifications: Diameter: 17-1/4 in. Style: Performance  Weight: 1.30 lb.

Kayak Hatch Cover - 8" - VCP Oval The VCP Oval Hatch Cover is a great replacement for lost or damaged lids. This performance hatch features Sea-Dog's unique two-part construction for maximum protection. Designed to float when dropped in the water, the hatch lids are easy to attach while still offering a superior watertight seal. This Sea-Dog VCP Oval Hatch Cover is compatible with the Valley Canoe Products® (VCP) oval hatch when mounted on an injection-molded rim bolted/glued to the deck; it is not recommended for rotomolded kayaks that do not feature this rim. *Sea-Dog® is not affiliated with Valley Sea Kayaks® and/or Kayak Sport®; reference to these brands only indicates similar sizing of hatch cover products. Features: Proudly constructed in the USA of injection molded nylon and polypropylene Lid only Specifications: Diameter: 8 in. Style: Performance Weight: 0.55 lb.

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

SEA-DOG Sea-Dog Line carries quality marine gear such as Deck Hardware, Hinges, Lighting, Plumbing, Fishing Equipment, Clamcleats, Chain and Rigging Hardware and more.

Toe Rail Folding Cleat The toe rail folding cleat makes a perfect movable, mid-ship cleat for spring lines, fenders, and more! This cleat is mountable on all aluminum toe rails. The rail is protected by a silicon rubber pad for rattle free installation. The cleat folds out of the way when not in use, the husky 3/8" diameter cleat assures strength. The complete unit is T-316 stainless. Fits most symmetric and asymmetric aluminum toe rails. Safe working load: 2,000 lbs

4-1/2" Folding Cleat - Stainless Steel Features: Folding Cleat Made with 316 Stainless Steel Length - 4-1/2" Height - Closed - 1/2", Open - 1-1/2" Fastener- 1/4" (2) - Not Included Overall body length - 4-9/16" Overall body width - 1-9/16" For top mount applications where depth under the deck is a concern

6" Folding Cleat - Stainless Steel Features: Folding Cleat Made with 316 Stainless Steel Length - 6" For top mount applications where depth under the deck is a concern

Sand Cast Brass Chrome Plated Folding Step This Folding Step has a patterned, texture finish for better traction. The spring loaded folding mechanism will keep the step in the open or closed position without rattling. Constructed of chrome plated sand cast brass. Installs with two FH fasteners (not included). Also see Sea-Dog® Stainless Folding Step (328020). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SS Steering Wheel Maneuvering Knob  Sea-Dog® Steering Wheel Maneuvering Knob fits our Sea-Dog® Steering Wheels (230111, 230212, 230115, 230211, 230215, 230313, and 230315). A steering knob attaches to the wheel for use in situations where maneuvering is excessive. It allows the driver to turn the steering wheel more quickly. Constructed of investment cast stainless steel for corrosion resistance this knob is designed for use with 1" x 3/4" oval tubing.

SS Maneuvering Knob with Black Nylon Insert  Sea-Dog® Steering Wheel Maneuvering Knob fits our Sea-Dog® Steering Wheels (230111, 230212, 230115, 230211, 230215, 230313, and 230315). Designed for 1" x 3/4" oval tubing. Direct replacement for 230323 and 230325.

Folding Cleat - Stainless Steel Studded - 4-1/2" Overall Length: 4-9/16" Cleat Length: 4-1/2" Depth: 1-5/8" Overall Width: 1-3/8"