EPA/CARB approved. For applications with 2 prong barb engine fitting; 1998 and newer Mercury, most Evinrude/Johnson and most Yamaha outboard engines. Kit includes tank connector with sealant, quick disconnect to tank fuel connector, hose clamp, universal fuel line and 3 fuel line connectors for Evinrude/Johnson, Mercury and Yamaha.

6.5" MRGB65 Speakers w/RGB Lighting - White - 200W Good times become great times with the company of these on board.  Powerful 6.5"speakers built for the marine environment, equipped with professional-grade RGB LEDs integrated behind the grille will naturally carry a big statement.  Included remote for the RGB LEDs gives you a fully-tuneable lighting system that allows full control to orchestrate whatever light show you can imagine. Features: Weatherproof full range  Polypropylene woofer cone and treated cloth surround Multi-color RGB illumination Technical Specifications: Speaker Impedance - 4 ohms Cone Material - Water-Resistant IMPP Sensitivity - 88dB Frequency Response - 70HZ - 20KHZ Max Power - 200W 100 Watts RMS Cut-out Dimensions - 5.75" Mounting Depth - 2.63" In the Box: Two (2) - 2 way speakers Wireless RGB remote Mounting hardware Instruction manual *Sold as a Pair WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

6.5" MRGB65S Speakers w/RGB Lighting - Silver - 200W Good times become great times with the company of these on board.  Powerful 6.5"speakers built for the marine environment, equipped with professional-grade RGB LEDs integrated behind the grille will naturally carry a big statement.  Included remote for the RGB LEDs gives you a fully-tuneable lighting system that allows full control to orchestrate whatever light show you can imagine. Features: Weatherproof full range  Polypropylene woofer cone and treated cloth surround Multi-color RGB illumination Technical Specifications: Speaker Impedance - 4 ohms Cone Material - Water-Resistant IMPP Sensitivity - 88dB Frequency Response - 70HZ - 20KHZ Max Power - 200W 100 Watts RMS Cut-out Dimensions - 5.75" Mounting Depth - 2.63" In the Box: Two (2) - 2 way speakers Wireless RGB remote Mounting hardware Instruction manual *Sold as a Pair WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

EPA/CARB approved. For applications with 2 prong barb engine fitting; 1998 and newer Mercury, most Evinrude/Johnson and most Yamaha outboard engines. Kit includes tank connector with sealant, quick disconnect to tank fuel connector, hose clamp, universal fuel line and 3 fuel line connectors for Evinrude/Johnson, Mercury and Yamaha.

High quality synthetic gear lube, 75W90, class GL-5. Manufactured to Volvo specifications. Replaces Volvo # 1141679. 55 GALLON DRUMS SHIPPED VIA TRUCK LINE ONLY FROM FACTORY, FREIGHT NOT ALLOWED. ADDITIONAL CHARGE APPLIES FOR LIFT GATE.

Recommended for all general marine applications requiring a GL-5 class lubricant. 80W90. Ideal for replacing all old hypoid 90 applications needs. Formulated for use in freshwater or saltwater conditions and all standard marine applications under 75HP. Reduces friction and protects gears, bearings and other Gearcase components. Lower Unit Kit contains: two(2) 10 oz. tubes of Lower Unit Gear Lube and one(1) Flush & fill tool for small gearcases.

Synthetic marine formulation reduces operating friction for increased performance and protection of gears, bearings and other Gearcase components. Recommended for use in high performance and high load operating conditions in both outboard and I/O lower unit gear cases, 75HP and above, where a GL-5 class lubricant is required. 80W90

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

Fuel Tank Strap Set - 48 (inches) Long for 3-6 Gallon Tanks This Attwood Fuel Tank Strap Set contains everything needed to secure a 3-6-gallon fuel tank in place. This kit includes a 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place. Features: Includes 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle Run the strap through footman loops, then tighten and buckle to hold the tank in place

Fuel Tank Strap Set - 72 (inches) Long for 12 Gallon Tanks This Attwood Fuel Tank Strap Set contains everything needed to secure a 12-gallon fuel tank in place. This kit includes a 72-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place. Features: Includes 72-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle Run the strap through footman loops, then tighten and buckle to hold the tank in place

Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting) This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. Features: These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end For Johnson/Evinrude engines and tanks *No Fuel Demand Valve or Tank Fitting is included in this kit

Yamaha Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting) This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Yamaha engines and tanks. The kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. Features: These Attwood Hose Fittings Are Included: A pair of hose fittings 8896LP6 for the tank end and the engine end for Yamaha engines and tanks *No Fuel Demand Valve or Tank Fitting is included in this kit

Goulds V15P HydroPro Accumulator Tank Goulds Water Technology Accumulator Tank, 4.5 Gallon Tank Volume 1.4 Gallon Drawdown at 30-50psi Vertical In-Line Pressure Tank 3/4” NPT Male Connection 13-15/16" Height x 11” Diameter 125psi Maximum Working Pressure Mounts In-Line to Existing Rigid Plumbing (no mounting brackets)  

4-Gallon Salt Feed System with 12VDC Pump The 4-Gallon Salt Feed System with 12VDC Pump is designed for boats that operate in fresh or brackish water and can only be used with LectraSan® MC™ or electro-scan® Type I MSDs. Salinity is monitored by the unit's Control Panel and salt solution will automatically be added to the MSD when needed. Pressurized freshwater is required. Minimum of 15 psi (103 kPa) working pressure. Operation Solar salt is added directly to the tank. Water supplied by the boats pressurized freshwater maintains the water level in the tank and continues to make saturated salt solution from the solar salt. A pump is used to add salt solution directly into the treatment tank when needed. The pump is controlled by the circuit board that monitors the electrode current in the treatment tank and automatically turns on the pump when salt is required. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pressure Storage Tank - 6.2 Gallon Drawdown  A pneumatic pressure charge, matched to the pump cut on pressure prevents water logging by separating the air charge from system water pressure with a rubber bladder. The result is smooth pressure delivery, even temperature mix in showers, and reduced pump cycling. Tanks may be mounted in any position, and anywhere in the cold water plumbing after the pump. PST tanks may be used for fresh or salt water. Mount hardware is included. PST-6 has a pump stand for mounting PJR, WSC-60 or WSC-80 pump.  Specifications: Diameter: 15" Mounting: Stand 30/50 Drawdown: 6.2 gallon Thread NPT: 3/4"