Manufactured from high-density polyethylene with UV inhibitors. Meets low permeation standards to satisfy EPA/CARB regulations, USCG and ABYC standards. Seamless one-piece construction with reserve fuel area designed into tank by means of a partitioned bottom. When gauge registers empty, simply tilt the tank to access reserve fuel supply. Features 90° fuel withdrawal assembly that rotates 360° to reduce fuel line kinks. Direct sight fuel gauge with glass lens, 2-stage self-venting fuel cap required by EPA/CARB.

Poly-Flex II Universal Leaning Post Cover - 47"H x 41"W x 24"D - Grey *Measurements - 47"H x 41"W x 24"D Includes 1/4″ strong and durable shock cord encased in the hem & heavy-duty attached adjustable strap system for a more customized fit. Available in 1 size in Sunbrella®, Performance Poly-Guard® & Sun-DURA®, our toughest marine grade polyester fabrics. Poly-Flex II Good Quality Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). *For storage and mooring only. Not recommended for trailering.

High density low permeation tanks meet or exceed EPA/CARB regulations. Lightweight with sturdy handles for easy transport and built-in fuel reserve capacity. Non-corrosive, unbreakable, dent-resistant, with UV stabilized, guaranteed no-leak construction. Includes 2-stage CARB compliant fuel cap.

High density low permeation tanks meet or exceed EPA/CARB regulations. Lightweight with sturdy handles for easy transport and built-in fuel reserve capacity. Non-corrosive, unbreakable, dent-resistant, with UV stabilized, guaranteed no-leak construction. Includes 2-stage CARB compliant fuel cap.

High density low permeation tanks meet or exceed EPA/CARB regulations. Lightweight with sturdy handles for easy transport and built-in fuel reserve capacity. Non-corrosive, unbreakable, dent-resistant, with UV stabilized, guaranteed no-leak construction. Includes 2-stage CARB compliant fuel cap.

Zenon™ MG-X Low Profile Left Hand Reel ZENON MG-X-L Zenon MG-X sets the standard in compact, lightweight performance. The IVCB-4™ braking system allows almost limitless adjustments in casting control while the one-piece X-Mag™ alloy frame and the C6 carbon side plates deliver significant weight reduction without sacrificing strength and durability. Features: 10 stainless steel HPCR™ bearings + 1 roller bearing One Piece X-Mag™ alloy frame Carbon Matrix™ drag system IVCB-4™ braking system Infini II™ spool design Compact bent carbon  handle Flat EVA knobs Aircraft-grade aluminum main gear Ti-coated line guide Recessed reel foot Lube port   Specifications: Reel Size: LP Gear Ratio: 6.8:1 Reel Handle Position: Left Braking System: Centrifugal Drag Type: Star Drag Anti-Reverse Feature: Instant-Anti Reverse Bearing Count: 11 Drag Material: Carbon Fiber Fishing Type: Baitcast Reel Spool Material: Aluminum Water Type: Freshwater Weight: 5.1oz

Zenon™ MG-X Low Profile Left Hand Reel ZENON MG-X-SHS-L Zenon MG-X sets the standard in compact, lightweight performance. The IVCB-4™ braking system allows almost limitless adjustments in casting control while the one-piece X-Mag™ alloy frame and the C6 carbon side plates deliver significant weight reduction without sacrificing strength and durability. Features: 10 stainless steel HPCR™ bearings + 1 roller bearing One Piece X-Mag™ alloy frame Carbon Matrix™ drag system IVCB-4™ braking system Infini II™ spool design Compact bent carbon  handle Flat EVA knobs Aircraft-grade aluminum main gear Ti-coated line guide Recessed reel foot Lube port   Specifications: Reel Size: LP Gear Ratio: 8.3:1 Reel Handle Position: Left Braking System: Centrifugal Drag Type: Star Drag Anti-Reverse Feature: Instant-Anti Reverse Bearing Count: 11 Drag Material: Carbon Fiber Fishing Type: Baitcast Reel Spool Material: Aluminum Water Type: Freshwater Weight: 5.1oz

Jordan Lee Low Profile High-Speed Baitcast Reel - Left Hand - JLEE-HS-L Jordan Lee, one of the hottest anglers within bass fishing, continues to make history with his back-to-back Classic victories and as the winner of the first-ever MLF Bass Pro Tour event. We worked directly with Jordan Lee to design the ideal reels for his fishing style. With two different gear ratios and right/left hand retrieve, there are JLEE LP reel options available for all bass anglers.  Features: 10 stainless steel ball bearings + 1 roller bearing Machined double anodized aluminum spool Power Disk™ drag system Duragear™ brass gear MagTrax™ brake system 90 mm Carbon handle Recessed reel foot One-piece graphite frame graphite side plates Large co-molded soft-touch knobs

Zenon™ MG-X Low Profile Right Hand Reel ZENON MG-X Zenon MG-X sets the standard in compact, lightweight performance. The IVCB-4™ braking system allows almost limitless adjustments in casting control while the one-piece X-Mag™ alloy frame and the C6 carbon side plates deliver significant weight reduction without sacrificing strength and durability. Features: 10 stainless steel HPCR™ bearings + 1 roller bearing One Piece X-Mag™ alloy frame Carbon Matrix™ drag system IVCB-4™ braking system Infini II™ spool design Compact bent carbon  handle Flat EVA knobs Aircraft-grade aluminum main gear Ti-coated line guide Recessed reel foot Lube port   Specifications: Reel Size: LP Gear Ratio: 6.8:1 Reel Handle Position: Right Braking System: Centrifugal Drag Type: Star Drag Anti-Reverse Feature: Instant-Anti Reverse Bearing Count: 11 Drag Material: Carbon Fiber Fishing Type: Baitcast Reel Spool Material: Aluminum Water Type: Freshwater Weight: 5.1oz

Zenon™ MG-X Low Profile Right Hand Reel ZENON MG-X-SHS Zenon MG-X sets the standard in compact, lightweight performance. The IVCB-4™ braking system allows almost limitless adjustments in casting control while the one-piece X-Mag™ alloy frame and the C6 carbon side plates deliver significant weight reduction without sacrificing strength and durability. Features: 10 stainless steel HPCR™ bearings + 1 roller bearing One Piece X-Mag™ alloy frame Carbon Matrix™ drag system IVCB-4™ braking system Infini II™ spool design Compact bent carbon  handle Flat EVA knobs Aircraft-grade aluminum main gear Ti-coated line guide Recessed reel foot Lube port   Specifications: Reel Size: LP Gear Ratio: 8.3:1 Reel Handle Position: Right Braking System: Centrifugal Drag Type: Star Drag Anti-Reverse Feature: Instant-Anti Reverse Bearing Count: 11 Drag Material: Carbon Fiber Fishing Type: Baitcast Reel Spool Material: Aluminum Water Type: Freshwater Weight: 5.1oz

PP5200 PowerPod Uncut (Usable Face = 15.18"W x 9.85"H) (39.6cm W x 24.9cm H) - Carbon Black PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. Structural Rigidity The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong! Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.  Nickel Chrome Plated Stainless Steel NavPod uses all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Commitment to Quality We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.

PED5200 PedestalPod Uncut (Usable Face = 15.18"W x 9.85"H) (38.6cm W x 24.9cm H) - Carbon Black PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics.  Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.

X-Grip® Large Phone Mount with Low-Profile Medium Tough-Claw™ The RAM® X-Grip® Large Phone Mount with Low-Profile RAM® Tough-Claw™ consists of the medium RAM® Tough-Claw™ base and the universal large RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The large RAM® X-Grip® features an ‘X’ design that expands and contracts to secure your phone and includes a device tether recommended for outdoor applications. With the RAM® Tough-Claw™ base connected, easily attach the RAM® X-Grip® to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter. This kit is compatible with handheld devices that fit the dimensions listed below. It is important to verify the dimensions of your handheld device with its case, sleeve, or skin when determining the overall size. Features: Low-profile phone mount clamps to your handlebar with the turn of a single knob includes a medium version of the RAM® Tough-Claw™ base, designed to clamp to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter; rubber pads provide stable gripping and protection of the mounting surface The spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; Includes optional device tether for peace of mind during rugged use; Check the compatibility section below to see if your phone will fit Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional Tether and (1) Glue Tube for Rubber Caps Hole Dimensions: Width Range: 1.75" - 4.5", Depth Range: .875" max Clamp Range (inch): 1" - 1.6" diameter Materials: High-strength composite and stainless steel Weight: 0.78 lb. Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, and iPhone 14 Pro Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Cat: S42, S62, and S62 Pro Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, and RV 770 LMT-S Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, and Pixel 7 Pro HTC: Bolt and U Ultra Huawei: Mate 20 X Kyocera: DuraSport 5G LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, and X venture Magellan: TR5 and TR7 Motorola: moto e4 plus, moto g4, moto z2, moto z2 play, and moto z3 Rand: McNally Road Explorer 5 and McNally TND 540 Razer: Phone 2 Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, and Galaxy S23 Ultra Sonim: RS60 Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, and Xperia XZ Premium

High density low permeation tanks meet or exceed EPA/CARB regulations. Lightweight with sturdy handles for easy transport and built-in fuel reserve capacity. Non-corrosive, unbreakable, dent-resistant, with UV stabilized, guaranteed no-leak construction. Includes 2-stage CARB compliant fuel cap.

Manufactured from high-density polyethylene with UV inhibitors. Meets low permeation standards to satisfy EPA/CARB regulations, USCG and ABYC standards. Seamless one-piece construction with reserve fuel area designed into tank by means of a partitioned bottom. When gauge registers empty, simply tilt the tank to access reserve fuel supply. Features 90° fuel withdrawal assembly that rotates 360° to reduce fuel line kinks. Direct sight fuel gauge with glass lens, 2-stage self-venting fuel cap required by EPA/CARB.