Blackout LED Cube Light - Flush Mount - 3" SPECS Input Voltage- 10-30V DC Wattage- 12W (4-3W CREE LED) Raw Lumens- 960 LUX at 10M- 17 Color Temperature- 6000K Beam Pattern- 90 degree Flood CONSTRUCTION Housing Material- Die-cast Aluminum Housing Housing Color- Black Lens Material- PC Mounting Bracket- Flush Mount Electronics- Integrated-Epoxy Encapsulated Hardware- Stainless 316 and includes a gasket and cut out template OPERATION Operating Temperature- -40 degree C to +60 degree C Current Consumption- .9 amps @ 13.8 volts IP Rating- IP68 Protections- Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

6 LED Cube Light - Flood Beam - 3" - 2 Pack Heise HE-DLWH1 Dual Light Wiring Harness Included Advanced thermal management- short circuit and open circuit protection and many other innovative features. Surface mount and flush mount LED cubes give you tons of options for every application you need. SPECS Input Voltage: 10-30V DC Power Consumption: 12W Each Pair (4-3W CREE LED) Lumen Flux: 900lm Each Color Temperature: 6000K Beam Pattern: 90deg Flood CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Hardware: Stainless Steel Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

6 LED Cube Light - Flood Beam - 3" Advanced thermal management- short circuit and open circuit protection and many other innovative features Surface mount and flush mount LED cubes give you tons of options for every application you need SPECS Input Voltage: 10-30V DC Power Consumption: 18W (6-3W CREE LED) Lumen Flux: 1440lm Color Temperature: 6000K Beam Pattern: 90deg Flood CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Hardware: Stainless Steel Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Cube Light - Flood - 3" - 2 Pack Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure. SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W OSRAM LEDs) Lumens: 960 Lux @ 10M: 32 Raw Color Temperature: 6000K Beam Pattern: 90° Flood CONSTRUCTION Housing Material: Die-Cast Aluminum Housing Housing Color: Dark Gray Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: 40°C to +60°C Current Consumption: .7 Amps @ 13.8 Volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Cube Light - Flood - 3" Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure. SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W OSRAM LEDs) Lumens: 960 Lux @ 10M: 32 Raw Color Temperature: 6000K Beam Pattern: 90° Flood CONSTRUCTION Housing Material: Die-Cast Aluminum Housing Housing Color: Dark Gray Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: 40°C to +60°C Current Consumption: .7 Amps @ 13.8 Volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Cube Light w/Harness - Spot Beam- 3" - 2 Pack Focus your field of view with the narrow but powerful 8 degree spot beam LED cube light. These 3 Inch 4 LED cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs for plenty of light. Replaceable color accent caps are included to customize the housing. Constructed of die-cast aluminum housing and a virtually unbreakable polycarbonate lens, these cube lights are IP68 rated and can withstand the worst environments. It can get hit, shaken, banged up and wet - without fear of failure. SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W OSRAM LEDs) Raw Lumens: 960 Each LUX @ 10M: 380 Color Temperature: 6000K Beam Pattern: 8° Spot CONSTRUCTION Housing Material: Die-Cast Aluminum Housing Housing Color: Dark Gray Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: 40°C to +60°C Current Consumption: .7 Amps @ 13.8 Volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Many boaters find exploring underwater an adventure into a whole new world. Whether you are on a night dive or set to explore murky waters, choose the best lighting for safety. For a night dive, consider the number of lumens and the angle of a dive light. In an article by www.scubadiving.com,any light with an average beam angle between 12 degrees to 75 degrees and a lumen output of 200 or greater should work fine for any recreational diving. The beam should be far wider than most torches can produce to prevent a bright spot from appearing. A 90-degree beam should be sufficient for most wide-angle video cameras.   For many safety reasons, having lights underwater on a boat is a must. The lights cast a glow with a lantern-type beam to make your location more visible. Many captains mount lights under the swim step to improve safety when stepping on or off a boat.   Nighttime fishing has become extremely popular. An easy and effective way to attract fish at night is with appropriate lighting. The fish are not attracted to the light itself — they are attracted to the zooplankton that gathers around it.   Color matters when it comes to underwater lighting. The most effective colors are Green light and White light to attract fish to boats, docks, and piers. These colors are brighter and will attract fish from a greater distance. Blue light is less bright and is typically used more for ambient lighting.    In a future article, we will cover deck lights. For safety regarding boating at night, an on-deck spotlight is an essential piece of equipment. Many skippers have been saved from an impending disaster because their searchlight beam lit up an unlit dock, break-wall, or buoy. The spotlight also helps you spot a person or object that has fallen into the water. It can aid in safety when needed to signal other boats.   When shopping for a spotlight, decide if you want one permanently installed or a handheld that can charge from a cigarette lighter receptacle. You can also purchase a battery-operated handheld light.   Golight Stryker Searchlight 12V w/Wired Dash Control w/20' Wire Harness – White One of the preferred searchlights among skippers is the Golight Stryker Searchlight. It comes with a 20' wire harness and has a wireless dash-mount remote option. For broad sweeps with the beam, the searchlight has a 370x Rotation x 135-degree Tilt, with 200,000 Candela Beam Intensity. It is both UV Ray and Saltwater Resistant.   ACR RCL-300 Remote Controlled Searchlight - 12V/24V The top-of-the-line ACR RCL-300 Remote Controlled Searchlight – 12V/24V has feature upon feature with its versatility and ease with touch control. It includes fingertip remote control Point Pad™; up to three remote Point Pad™ units may be installed on the system; surface/flush mount options included. The exclusive XRCiZ™ feature rotates and moves the light assembly every 30 days from activation to keep all bearing surfaces free of corrosion and all electrical contacts functional.   Underwater Lighting Among the more popular LED hull-mounted lights is the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting - Midnight Blue. XFM models, or Xchangeable Flush Mounts, are exchangeable without hauling should service be needed. The light can be retrofitted into most existing underwater lighting hole cut-outs, yielding immediate benefits of no startup power surge, low heat, minimal maintenance, and improved light output. It offers 7,000-fixture lumen brightness with the 2010XFM HD Gen2 model.   For additional information and pricing on the lighting listed here, go to https://www.clrmarine.com/462m4/lighting.html.     Fair Winds, Smooth Sailing. ____________________________________________________________________________________________________ To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.     Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com  

Blackout Cube LED Light *2-Pack Heise’s Blackout Series high output cube LED lights are small but powerful for better coverage at night. These next-generation lights have refined frames and cleaner lines for a sleek yet minimalistic look. The upgraded optics have changed from a direct to an indirect placement allowing more control of the location and pattern of the beam. This allows the lights to be tailored to the vehicle, its entire lighting system, and for the driver’s lighting coverage needs. Each set is rated IP67 and includes a dual light wiring harness (HE-DLWH1) for installation. Flush mount options are also available and sold individually (without harness). Features: 2 Light Pack Input Voltage: 12-24V Dc Color Temperature: 5700K Beam Pattern: 10o Spot Housing Material: Die-Cast Aluminum Color: Black Lens Material: Polycarbonate Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 Operating Temperature: -40°F To +140°F Protection: Reverse Polarity Mounting: Side & Rear Limited Lifetime Warranty Specifications: Size: 2.5” 4 LEDs Wattage: 20W Raw Lumens: 1,920lm Lux at 10m: 635 Current Consumption @ 13.8V: 1.3A IP Rating: IP67 *Values are for a single light  Vehicle Applicatins: Universal *WARNING: THIS LIGHTING PRODUCT IS SOLD FOR OFF-ROAD USE ONLY. This product should not be used on the road. Owners should keep the original factory bulbs so that they can replace them for use on public roads. Keep the box that the new bulbs came in to store the bulbs and be sure to handle them with care when removing and re-installing.

32" Blackout Dual Row - 60 LED - Lightbar Heise Blackout Series LED lights are a versatile lighting solution for different vehicles and use. Function meets style with refined frames and cleaner lines for a sleek yet minimalistic look. The upgraded optics have changed from a direct to an indirect placement allowing more control of the location and pattern of the beam. This allows the lights to be tailored to the vehicle, its entire lighting system, and for the driver’s lighting coverage needs. The hybrid 90o flood and 8o spot beam pattern combination deliver the best of both worlds with intense spotlights in the center flanked by wide beam lights on each side. Heise’s protective vent port allows for internal moisture to escape and prevents any external moisture from entering the light bar housing. Features: Input Voltage: 10-30V Dc Color Temperature: 5700K Beam Pattern: Combo 90o Flood / 8o Spot Housing Material: Die-Cast Aluminum Color: Black Membrane: Protective Vent Port Lens Material: Polycarbonate Mounting Bolt Drill: 0.25” Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 Operating Temperature: -40oF To +140oF Protection: Reverse Polarity Mounting: Side & Rear Limited Lifetime Warranty Specifications: Length: 32” Wattage: 300W Raw Lumens: 25,200lm Lux at 10m: 8624 Current Consumption @ 13.8V: 9.3A IP Rating: IP67 Vehicle Applications: Universal

42" Blackout Dual Row - 80 LED - Lightbar Heise Blackout Series LED lights are a versatile lighting solution for different vehicles and use. Function meets style with refined frames and cleaner lines for a sleek yet minimalistic look. The upgraded optics have changed from a direct to an indirect placement allowing more control of the location and pattern of the beam. This allows the lights to be tailored to the vehicle, its entire lighting system, and for the driver’s lighting coverage needs. The hybrid 90o flood and 8o spot beam pattern combination deliver the best of both worlds with intense spotlights in the center flanked by wide beam lights on each side. Heise’s protective vent port allows for internal moisture to escape and prevents any external moisture from entering the light bar housing. Features: Input Voltage: 10-30V Dc Color Temperature: 5700K Beam Pattern: Combo 90o Flood / 8o Spot Housing Material: Die-Cast Aluminum Color: Black Membrane: Protective Vent Port Lens Material: Polycarbonate Mounting Bolt Drill: 0.25” Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 Operating Temperature: -40oF To +140oF Protection: Reverse Polarity Mounting: Side & Rear Limited Lifetime Warranty Specifications: Length: 42” Wattage: 400W Raw Lumens: 33,600lm Lux at 10m: 11500 Current Consumption @ 13.8V: 13.5A IP Rating: IP67 Vehicle Applications: Universal

LED Electrical Adapter - 7-Way RV Blade to 4 or 5-Way Flat Trailer There are several different types of connectors used to supply power from a tow vehicle's electrical system to a trailer's wiring system. Some trailers only need the bare essentials—running lights, brake lights, and turn signals—while others require a connection for reverse lights, electric brakes, and auxiliary power. With connectors ranging from simple to complex, it may be the case that the connection between a vehicle and the trailer is not a perfect match. For example, a truck may be equipped with a 6-way round socket, but the related trailer may have a 4-way flat plug. For this very common problem, CURT offers a quick and simple solution in the form of an electrical adapter. An adapter is an electrical device that allows a connection to be made between a mismatched trailer plug and a vehicle socket. It easily plugs into a vehicle's electrical socket and usually requires no additional wiring. CURT offers an array of adapters to accommodate most types of plugs and sockets, including 4-way flat, 4-way round, 5-way flat, 6-way round, 7-way RV blades, and more. This electrical adapter is designed to adapt a 7-way RV blade vehicle socket to fit a 4-way or 5-way flat plug on a trailer with LED lights. It features built-in resistors for vehicles with computers that don't recognize LED lights and enables them to be compatible with trailers that have them. It also has a simple plug-and-play design and requires no splicing. All CURT wiring and electrical products come with a one-year limited warranty to give you the assurance you need to tow with confidence. Features: Adapts a 7-way RV blade vehicle socket to fit 4-way or 5-way flat trailer plugs Enables vehicles with a 7-way RV blade socket to recognize LED trailer lights Built-in, integrated resistors for computers that don't recognize LED lights The 4-way flat output connects tail lights, brake lights, and turn signals 5-way flat adds connection for reverse lights A simple plug-and-play design eliminates the need for cutting or splicing Specifications: Hub Warehouse: D25 Part Type: 7-Way Electrical Adapter Warranty: Limited lifetime warranty (one-year finish, one-year parts)

LED Electrical Adapter - 7-Way RV Blade to 6 Way Round Trailer There are several different types of connectors used to supply power from a tow vehicle's electrical system to a trailer's wiring system. Some trailers only need the bare essentials—running lights, brake lights, and turn signals—while others require a connection for reverse lights, electric brakes, and auxiliary power. With connectors ranging from simple to complex, it may be the case that the connection between a vehicle and the trailer is not a perfect match. For example, a truck may be equipped with a 6-way round socket, but the related trailer may have a 4-way flat plug. For this very common problem, CURT offers a quick and simple solution in the form of an electrical adapter. An adapter is an electrical device that allows a connection to be made between a mismatched trailer plug and a vehicle socket. It easily plugs into a vehicle's electrical socket and usually requires no additional wiring. CURT offers an array of adapters to accommodate most types of plugs and sockets, including 4-way flat, 4-way round, 5-way flat, 6-way round, 7-way RV blades, and more. This electrical adapter is designed to adapt a 7-way RV blade vehicle socket to fit a 6-way round plug on a trailer with LED lights. It features built-in resistors for vehicles with computers that don't recognize LED lights and enables them to be compatible with trailers that have them. It also has a simple plug-and-play design and requires no splicing. All CURT wiring and electrical products come with a one-year limited warranty to give you the assurance you need to tow with confidence. Features: Adapts a 7-way RV blade vehicle socket to fit 6-way round trailer plugs Enables vehicles with a 7-way RV blade socket to recognize LED trailer lights Built-in, integrated resistors for computers that don't recognize LED lights 6-way connects tail, brake, turn signals, electric brakes, and auxiliary power A simple plug-and-play design eliminates the need for cutting or splicing Specifications: Hub Warehouse: D25 Part Type: 7-Way Electrical Adapter Warranty: Limited lifetime warranty (one-year finish, one-year parts)

LED Bulkhead Livewell Light Flush Mount - Amber Features: Operates 9-16 Volt DC Systems 50 mA power draw Rated @ 100,000 Hours of Service Life Requires 11/16" (.687) Hole Shock and Vibration Proof Cool to the Touch No Corrosion Rated for Underwater Use 1.25" x 1.00

LED Bulkhead Livewell Light Flush Mount - Green Features: Operates 9-16 Volt DC Systems 50 mA power draw Rated @ 100,000 Hours of Service Life Requires 11/16" (.687) Hole Shock and Vibration Proof Cool to the Touch No Corrosion Rated for Underwater Use 1.25" x 1.00

3" 4 LED Cube Light - 2-Pack Specifications: Wattage: 13W Lumens: 1080 Lux @ 10M: 411 Color Temperature: 6000K Beam Pattern: Spot (8°) Construction: Housing Material: Die-Cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 Operation: Operating Temperature: -40°C to +60°C Current Consumption @ 13.8V: 0.9 A IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.