|
True Fit Fender Holder - 9" Diameter
Polyform True Fit Boat Fender Holders provide a convenient storage location for boat fenders. Made from durable materials, these fender holders are built to last many years and provide a professional look for any vessel. The modular design and hardware attachments allow for a wide array of options for boat fender storage.
The modular system fits rails from 7/8" to 1" at any height or any angle. Because of its modular design, you can add on additional fender holders as your needs change.
*Fenders and connectors sold separately
Compatible With:
F-2 Fenders, F-3 Fenders, G-5 Fenders, NF-5 and HTM-2 Fenders
Features:
A versatile system for easy installation
Durable construction for years of service
Flexible modular design - add on or reconfigure at anytime
Technical Specifications:
Made from 304 Stainless Steel wire
Dimension Inside Diameter - 9"
Dimension Length - 19"
Weight (individual Fender Holder) - 1.6 lbs.
In the Box:
One (1) TFR-230 Holder
*Sold as a Individual
|
78.96 |
|
|
True Fit Fender Holder - 12" Diameter
Polyform True Fit Boat Fender Holders provide a convenient storage location for boat fenders. Made from durable materials, these fender holders are built to last many years and provide a professional look for any vessel. The modular design and hardware attachments allow for a wide array of options for boat fender storage.
The modular system fits rails from 7/8" to 1" at any height or any angle. Because of its modular design, you can add on additional fender holders as your needs change.
*Fenders and connectors sold separately
Compatible With:
F-5 Fenders, G-6 Fenders, NF-5 and HTM-3 Fenders
Features:
A versatile system for easy installation
Durable construction for years of service
Flexible modular design - add on or reconfigure at anytime
Technical Specifications:
Made from 304 Stainless Steel wire
Dimension (individual Fender Holder) Inside Diameter - 12"
Dimension (individual Fender Holder) Length - 25"
Weight - 1.85 lbs.
In the Box:
One (1) TFR-280 Holder
*Sold as a Individual
|
91.24 |
|
|
True Fit 2 Fender Holder Kit - 12" Diameter
Polyform True Fit Boat Fender Holders provide a convenient storage location for boat fenders. Made from durable materials, these fender holders are built to last many years and provide a professional look for any vessel. The modular design and hardware attachments allow for a wide array of options for boat fender storage.
The modular system fits rails from 7/8" to 1" at any height or angle. Because of its modular design, you can add on additional fender holders as your needs change.
Compatible With:
F-5 Fenders, G-6 Fenders, NF-5 and HTM-3 Fenders
Features:
A versatile system for easy installation
Durable construction for years of service
Flexible modular design - add on or reconfigure at anytime
Technical Specifications:
Made from 304 Stainless Steel wire
Dimension (individual Fender Holder) Inside Diameter - 12"
Dimension (individual Fender Holder) Length - 25"
Weight (kit) - 3.7 lbs
In the Box:
Two (2) TFR-280 Holders
Three (3) TFR-402 Swivel connectors (7/8" - 1" Rail)
Two (2) TFR-403 Parallel connectors
*Sold as a Kit
|
241.76 |
|
|
9" Diameter Fender Holder Kit - 2 Pack
Polyform True Fit Boat Fender Holders provide a convenient storage location for boat fenders. Made from durable materials, these fender holders are built to last many years and provide a professional look for any vessel. The modular design and hardware attachments allow for a wide array of options for boat fender storage.
Features:
Versatile system for easy installation
Durable construction for years of service
Flexible modular design - add on or reconfigure at anytime
Available as individual pieces or as a kit for a two or three holder assembly
One of the most popular fender holders on the market
The two holder kits include two TFR fender baskets (of selected size), three TFR 402 rails mounts (for 7/8 - 1 in. rails) and a pair of TFR 403 Parallel Connectors
Specifications:
Size: (inch) 9"
Fits the following Polyform fenders: F-2, F-3, G-5, HTM-2, NF-5
*Note: Fenders sold separately
|
219.19 |
|
|
Swivel Connector - 7/8" - 1" Rail
A vital component in the Polyform True Fit Modular System of fender holders. The Polyform swivel connector allows a fender holder(s) to be safely and securely attached to a rail 7/8" to 1" in size.
Polyform Recommends:
Use (2) Swivel Connectors for one fender holder
Use (3) Swivel Connectors when two fender holders are secured together
Use (4) Swivel Connectors when three fender holders are secured together
Features:
Made of ABS plastic
Color - Black
*Sold as an Individual
|
23.95 |
|
|
Parallel Connector
A vital component in the Polyform True Fit Modular System of fender holders. Polyform's Parallel Connector is used to connect Polyform single fender holders together, to form a fender holder series.
Polyform recommends the use of two (2) Parallel Connectors to be used for each Fender Holder connection.
Features:
Made of ABS plastic
Color - Black
*Sold as an Individual
|
14.40 |
|
|
Swivel Connector - 1-1/8" - 1-1/4" Rail
A vital component in the Polyform True Fit Modular System of fender holders. The Polyform swivel connector allows a fender holder(s) to be safely and securely attached to a rail 1-1/8" to 1-1/4" in size.
Polyform Recommends:
Use (2) Swivel Connectors for one fender holder
Use (3) Swivel Connectors when two fender holders are secured together
Use (4) Swivel Connectors when three fender holders are secured together
Features:
Made of ABS plastic
Color - Black
*Sold as an Individual
|
26.39 |
|
|
Anchoring & Docking
Are you heading out on the water? Make sure you have a great boat anchor onboard. Having an anchor on standby is the easiest way to ensure you are safe. If your engine dies, you need an anchor to hold you in place while making repairs. If you want to get out into the current, you need an anchor to keep you in place while fishing or swimming. We have the right anchor for your boat.
Your boat is not a bumper car. To protect your investment and keep your boat looking good, make sure you have boat fenders. When it comes to docking, the risk of rubbing or bumping increases unless you are prepared to prevent it Choose from our wide range of fenders and dock bumpers to ensure your boat is docked safely without a single scratch.
|
|
|
Polyform HTM-4 Fender 13.5" x 34.8" - White with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
162.11 |
|
|
Rail Mount Stainless Steel Fender Holder Dual - 11.5"
The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.
|
104.80 |
|
|
Rail Mount Stainless Steel Fender Holder Dual - 7.5"
The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.
|
79.39 |
|
|
Rail Mount Stainless Steel Fender Holder Dual - 9.5"
The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.
|
95.28 |
|
|
Fender Holder w/Adjuster - White
Tough and durable PVC mounting strap snaps over railings, lifelines or
stanchions. Allows fender lines to be adjusted to length in a matter of
seconds.
|
10.21 |
|
|
Fender Holder w/Adjuster - Black
Tough and durable PVC mounting strap snaps over railings, lifelines or
stanchions. Allows fender lines to be adjusted to length in a matter of
seconds.
|
11.24 |
|
|
Specialty Inflatable Fender Ball - 24" Diameter - Black
Inflatable Ball Fender 24” diameter sphere.
Features:
Made from Black 41oz Industrial Grade Material
Special tie-down points RF welded (NOT glued)
Custom-formed D-Rings SS
24” diameter ball
All made in the USA
Crafted in Milwaukee
All seams have extra welded PVC strips
Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe
All welded seams no gluing
Extra seam tape on the welds for added strength
Fills with M3100 air pump or any tube pump
Easy to deflate and roll up for Maximum storage
Direct UV-printed logos
*IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation ice!
|
249.76 |
|