Up/Down Footswitch - Compact, Black Part #: P104810 Maxwell's compact up and down foot switches are now available in black and white versions. Operates via solenoids thus allowing smaller diameter wiring.

Up/Down Footswitch - Compact, White Part #: P104809 Maxwell's compact up and down foot switches are available in black and white versions. Operates via solenoids thus allowing smaller diameter wiring.

Up/Down Windlass Control Panel w/Push Button ON/OFF Switch Easy to use, panel mounted Up/Down switch for remote windlass operation from the helm, flybridge or cockpit. Suitable for use with dual-direction solenoids Manufactured from marine grade materials Splash Proof Suitable for 12V and 24V applications Includes on/off switch and power indicator light

Anchoring & Docking Are you heading out on the water? Make sure you have a great boat anchor onboard. Having an anchor on standby is the easiest way to ensure you are safe. If your engine dies, you need an anchor to hold you in place while making repairs.  If you want to get out into the current, you need an anchor to keep you in place while fishing or swimming. We have the right anchor for your boat.   Your boat is not a bumper car. To protect your investment and keep your boat looking good, make sure you have boat fenders. When it comes to docking, the risk of rubbing or bumping increases unless you are prepared to prevent it Choose from our wide range of fenders and dock bumpers to ensure your boat is docked safely without a single scratch.

REMOTE UP/DOWN CONTROL Easy to use panel-mounted Up/Down switch for remote windlass operation from the helm, flying bridge or cockpit. Available for use with dual-directional solenoids. Manufactured from marine-grade materials. Splash proof. Suitable for use with DC 12V or 24V dual-directional solenoids.

Guarded Rocker Switch (Up/Down) The guarded rocker switch controls the up and down function of all anchor windlass models with a solenoid/contactor or control box.  The switch can be mounted at the helm as the main switch for operation or mounted at a second station as a secondary switch.  It features a raised plastic guard surrounding the rocker switch which helps prevent accidental activation of the windlass, enabling safer operation.  Technical Specifications: Switch Direction - Up/Down Material - Plastic Power - 12/24V Color - Black *Sold as an Individual

52MM (2-1/16") ViewLine Trim Indicator Gauge Up/Down - Black Dial & Round Bezel Veratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use.  ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio. The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color.  Interchangeable bezel option. Features: 8 pole Tyco/Hirschmann MQS plug  Red LED Via Plus And Min Warning Light Operating voltage 8–32 V  Input signal: standard Ω values  Optional make-point switch can be connected  Reverse polarity protection  Anti-fog double lens  Front side protection rating IP67  52 mm installation diameter  50 mm installation depth  In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

23.75" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate Required Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management. Compact Design Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must. Eliminate Interference A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation. Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount. Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.  *Top Plate Sold Separately

28" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate Required Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management. Compact Design Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must.   Eliminate Interference A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation. Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.   Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.  *Top Plate Sold Seperately

Windlass Handheld Remote Control with Up/Down Switch Lewmar's Windlass Handheld Remote Control with Up/Down Switch on a coiled cable. Provides the option to control your windlass from the bow or foredeck, from a wingdeck, or while moving around a cockpit or helm station. Features: Follow rigorous quality standards High-quality Handheld up/down switch on a coiled cable

SR-M Angled Flush Mount - Up/Down This SR-M Angled Flush Mount Kit allows you to angle your SR-M flush mount LED light by 15 percent up or down.

52MM (2-1/16") OceanLink Engine Trim - Up/Down - White Dial & Bezel OceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.   Interchangeable bezel option.  Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Rupp Single Rigging Kit W/Lok-Ups & Nok-Outs - 160' Black Mono Complete rigging packages that allow you to run one (1) line on each rigger. This kit includes (2) exclusive Rupp single pulley halyard line locks with shock cords, 160ft of 400lb black mono-filament halyard lines one pair of Rupp NOK-OUT release clips, (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (4) Crimp Sleeves.

Rupp Double Rigging Kit w/Lok-Ups & Nok-Outs - 260' Black Mono Complete rigging packages that allow you to run two (2) lines on each rigger. This kit includes (2) exclusive Rupp double pulley halyard line locks with shock cords, 260ft of 400lb black mono-filament halyard lines, two pair of Rupp NOK-OUT release clips, (4) Nylon ball stops, (2) Strap Eyes, (8) Snap Swivels, (8) Crimp Sleeves.

Rupp Triple Rigging Kit W/Lok-Ups & Nok-Outs - 520' Black Mono Cord Complete rigging packages that allow you to run three (3) lines on each rigger. This kit includes (2) exclusive Rupp triple pulley halyard line locks with shock cords, 520ft of 400lb black mono-filament halyard lines three pair of Rupp NOK-OUT release clips, (6) Nylon ball stops, (2) Strap Eyes, (12) Snap Swivels, (12) Swivels.