|
EMERGENCY CRANK HANDLE (RC8, RC10, RC12 SERIES)
For use with RC8, RC10, RC12 & Freedom Series anchor winches. Constructed of light weight, durable injection-moulded plastic, these handles float if accidentally dropped overboard.
|
56.32 |
|
|
Seal Kit f/2200 & 3500 Series Windlass Gearboxes
Kit includes:
(2) 55 x 70 x 8 oil seal
(2) 20 x 2 O-ring
(1) Sight glass
(1) O-ring ID 90mm section dia. 2mm
(1) 25 x 47 x 7 oil seal
|
38.57 |
|
|
RC8-6 Vertical Windlass 1/4" Chain, Rope 1/2" 12v
Package Includes
Windlass
On/Off Breaker Panel
Reversing Solenoid
Up/down Panel Switch
Emergency crank / clutch release handle
Features
Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass
Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations
Fully automatic rope / chain windlass is designed to effortlessly retrieve and deploy 1/4" (6mm / 7mm) chain spliced to 1/2" (12 mm) three strand or 8-brait (plait) rope
The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series
Full disassembly capability of topworks utilising handle provided and an Allen key
The RC8 Series is manufactured from marine-grade 316 stainless steel for long term durability
The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance
In combination with a heavy duty, large wire diameter, stainless steel preloaded spring, the pressure arm always exerts maximum control pressure
The RC8 works just as effectively with all-chain rodes for those who desire a Low Profile, elegantly styled windlass on their foredeck
Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
Full disassembly capability of the topworks utilising only the handle provided and an Allen key
Manual override using the emergency crank handle provided
Sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and worm wheel
All RC Series windlasses are fitted with Maxwell's unique Wave Design™ chainwheel
This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode
The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval
As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope
Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode
Wave Design™ Chainwheel Is fitted to all RC Series windlasses, designed for anchor rodes with any marine grade chain, G4, BBB, Proof Coil and Metric
Specifications
Material: Marine-Grade 316 Stainless Steel
Power: 12 Volt DC, 600 Watts
Chain / Short Link: 1/4" ( 6mm / 7mm )
Maximum Pull: 770 lbs ( 350kg )
Rope Size: (Nylon)* (3-Strand or 8 Plait Recommended) 1/2" (12mm)
Chain Speed (Anchor Retrieval): 92 Feet per Minute (28 m / min)
Rope Speed (Anchor Retrieval): 79 Feet per Minute (24 m / min)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1156.70 |
|
|
Maximum Pull: 1320lbs
The larger RC8-8 can be used with 8mm (5/16") chain spliced to 14mm (9/16") three strand or 8-plait rope.
The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series.
Sleek, low profile and MAX-grip capstan drum versions are available to suit individual user preference.
Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass.
Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations.
Full disassembly capability of top works utilizing handle provided, a screw driver and an Allen key.
The RC8 Series is manufactured from marine grade 316 stainless steel for long term durability. The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance.
In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure.
The RC8 works just as effectively with all-chain rodes for those who desire a low profile, elegantly styled windlass on their foredeck.
Huge through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.
Cone type clutch/brake mechanism permits manual, free fall anchoring.
Manual override using the emergency crank handle provided
Sealed oil bath and marine grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and worm wheel.
Kits include: windlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle.
Anchor Rode Sold Seperately
|
1496.86 |
|
|
Kit Freedom Key - Washer
Maxwell key/washer kit for Maxwell Freedom series windlasses.
|
28.55 |
|
|
Freedom Shaft Service Kit
Maxwell shaft service kit for Maxwell Freedom series windlasses.
|
28.80 |
|
|
Seal Kit for Freedom Series 1000 & 1500 Rope/Chain Windlasses
Kit includes:
(2) 40 x 55 x 8 mm oil seal
(1) 90 x 2 mm O-ring
(1) Sight glass
(1) O-ring 20 x 2 mm
(1) 25 x 47 x 7 mm oil seal
|
29.32 |
|
|
Anchoring & Docking
Are you heading out on the water? Make sure you have a great boat anchor onboard. Having an anchor on standby is the easiest way to ensure you are safe. If your engine dies, you need an anchor to hold you in place while making repairs. If you want to get out into the current, you need an anchor to keep you in place while fishing or swimming. We have the right anchor for your boat.
Your boat is not a bumper car. To protect your investment and keep your boat looking good, make sure you have boat fenders. When it comes to docking, the risk of rubbing or bumping increases unless you are prepared to prevent it Choose from our wide range of fenders and dock bumpers to ensure your boat is docked safely without a single scratch.
|
|
|
Cone and Washer Kit v/CPX and V Series Windlasses
Replacement cones and washers for CPX and V series windlasses.
Compatible With:
CPX and V Series windlasses
In the Box:
Cones x two (2)
Washers x two (2)
Instruction manual
*Sold as an Indivudual
|
86.36 |
|
|
OceanDMX RC Pro Series Colors 915MHz
The OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc.
Features:
User-friendly interface, easy and simple operation
Control up to 4 zones
Control of third-party DMX devices
3 programmable scenes
Can be controlled by a maximum of 8 different remotes
Pre-set 10 changing modes, with pause function (Colors only)
Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors.
Box Contents:
Remote control
Waterproof pouch
DMX Receiver
Control Cable
Terminator (Not included for X-Series)
DMX Junction Box (X-Series Only)
Installation Manual
|
600.00 |
|
|
OceanDMX RC X-Series Colors 915MHz
The OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc.
Features:
User-friendly interface, easy and simple operation
Control up to 4 zones
Control of third-party DMX devices
3 programmable scenes
Can be controlled by a maximum of 8 different remotes
Pre-set 10 changing modes, with pause function (Colors only)
Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors.
Box Contents:
Remote control
Waterproof pouch
DMX Receiver
Control Cable
Terminator (Not included for X-Series)
DMX Junction Box (X-Series Only)
Installation Manual
|
573.91 |
|
|
Grand Slam 380XL Outrigger w/Offset Handle f/Hard Tops up to 4-1/2" Thick
Taco Sport Fishing introduces the GS-380XL, created to meet the growing demands of the marine industry's larger segment of top performance center console boats. Like its predecessor, the GS-380, our GS-380XL offers all the same features and more. Built with a focus in mind to accommodate the needs of the elite center console market which are being built with thicker hardtops that will hold more electronics as well as performance sport fishing equipment. Our GS-380XL will accommodate hard tops up to 4-1/2" in thickness, which can be found on boats 35' to 50'. The new design also offers an extra 2-1/2" of body thickness and two added positions for mounting the handles, either at a 0° or at a 90°, offering additional hard top clearance.
Features and Benefits
For use on 35' to 50' boats
Increased body length to fit hard tops up to 4-1/2"
Same profile as the Taco Sport Fishing GS-380
Complete vertical outrigger adjustment from under the hard top
Optional 90° handle mounting position for more lever rotation
Compatible with Taco Marine hardware including backing plates and wedge plates
Designed for hard top applications
Rugged Stainless Steel Type 316 and anodized Aluminum construction
12 locking fishing positions
Ergonomic shape rotator lever
Top mounted 4" X 6" base
Compatible with Taco Sport Fishing 1-1/2" heavy duty telescopic outriggers (Aluminum or Carbon Fiber)
Sold in pairs
Three year limited warranty
|
2159.99 |
|
|
8" Alloy Winch Handle - Non-Locking
The workhorse of winch handles, the Lewmar alloy handle is made to afford comfort, superior design, and guaranteed ease of use.
Features:
Ball bearings provide maximum efficiency
Durable and lightweight
Without locking mechanism
Technical Specifications:
Material - Alloy
Length - 8"
Locking - No
*Sold as an Individual
|
70.60 |
|
|
Pro Series Windlass Gypsy #516
Replacement gypsy on Windlass Model Pro-Fish/Series 1000
Features:
Rope-chain gypsy
Cone clutch for smooth, easy control
Manual Free Fall
W.A.R.P Drum
Robust and reliable drivetrain
Manual override (optional)
Technical Specifications:
Rope Size - 9/16 to 5/8" (14.29 to 15.85 mm) (3 strand hard lay up)
Chain Size - 5/8" (15.85 mm) ( Campbell S3, Lewmar 9.5mm G40)
*Sold as an Individual
|
155.96 |
|
|
RAM Handlebar/Rail Mount f/Garmin Montana® Series
Included is mounting hardware that will accommodate rails from 0.5" to 1.25" in diameter.
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Montana 600
Garmin Montana 650
Garmin Montana 650t
Features:
1. Open access to all electronic ports and camera
2. Patent pending roller design for super smooth placement and removal of the GPS
Material:
High strength composite
|
43.88 |
|