Rope Deck Pipe (0757) Chrome Plated Zinc Alloy Max Rope Size 1" O.D. Flange: 3-3/8"

Description: 316 S.S. Hinged Chain & Rope Deck Pipe Inside diameter - 3-7/8" x 2-1/2" Flange - 4-1/8" x 2-7/8" Fastener - #12(4) Max. Rope Diameter - 1-1/4" Slide top to right to lock into place.

Rope and Chain Deck Pipe (Chrome) (0750) Chrome Plated The Cover Has a Hook for Hanging Chain and Stainless Steel Cable Retainer Opening for Chain Size: 3/8" Dimensions Flange: 5-1/4" x 4" Height Overall: 1-3/8"

Perko 3/4" Pipe to Hose Adapter Straight Bronze Cast bronze Cast hex for easier installation Precision machined hose barb Technical Information: Pipe Size Inches: 3/4 Hose Size Inches: 3/4 Length Overall Inches: 1-3/4 Model Number: 0076DP5PLB Ship Weight: 1.1/4.7 lbs. MADE IN THE USA

Perko 3/4" Pipe To Hose Adapter 90 Degree Bronze Cast Bronze Cast hex for easier installation Curved 90 degrees Technical Information: Pipe Size Inches: 3/4 Hose Size Inches: 3/4 Length Overall Inches: 4-1/2 Model Number: 0063DP5PLB Ship Weight: 2.1/9.1 *The above item meets the requirements of U.S.C.G. Safety Standards, January 31, 1977 for gasoline fuel systems, 33 CFR 183.

Anchoring & Docking Are you heading out on the water? Make sure you have a great boat anchor onboard. Having an anchor on standby is the easiest way to ensure you are safe. If your engine dies, you need an anchor to hold you in place while making repairs.  If you want to get out into the current, you need an anchor to keep you in place while fishing or swimming. We have the right anchor for your boat.   Your boat is not a bumper car. To protect your investment and keep your boat looking good, make sure you have boat fenders. When it comes to docking, the risk of rubbing or bumping increases unless you are prepared to prevent it Choose from our wide range of fenders and dock bumpers to ensure your boat is docked safely without a single scratch.

Chrome Brass Hinged Chain Deck Pipe This Hinged Chain Deck Pipe facilitates the storage of anchor lines out of the way below deck, reducing the risk of trip hazards on deck. The circular pipe features a hinged cap for easy access. Chain can remain in slot when the cover is closed. Constructed of die cast chrome plated brass. Installs with four #8 FH fasteners (not included).

HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" Rope Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlasses has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system. The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors. The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval. As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode. Features: Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck 2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section 2-piece watertight case allows for quick and easy, on-deck, routine maintenance Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain) Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs Works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

HRC10 Horizontal Rope Chain Windlass - 12V No Capstan 3/8" Chain, 5/8" Rope Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlass has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system. The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors. The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval. As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode. Features: Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck 2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section 2-piece watertight case allows for quick and easy, on-deck, routine maintenance Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain) Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required = The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RC 12-12 Vertical Windlass 1/2" Chain, 3/4" Rope, 12V Package Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/Down Panel Switch Handle The RC12 Series incorporates Maxwell's latest stylish innovation in automatic rope/chain technology. Retaining the classic open design styling more appropriate on larger boats, the RC12 Series represents the next generation of rope/chain windlass evolution in every respect. Maxwell once again leads the market in innovative thinking with the introduction of their latest Wave Design™ chainwheel. This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval. Features The RC12-12 fully automatic windlass series is designed to effortlessly retrieve and deploy 12 - 13 mm (1/2") short link chain and 20 mm (5/8") three strand or 8-Plait rope. Stainless steel AISI 316. A sleek, Low Profile version and a fluted stainless steel (AISI 316) capstan drum version, are available. The RC12 is packed with patented innovative features combined with Maxwell's traditionally classic aesthetics, but reflecting the modern "form follows function" of the highly successful RC6, RC8 and RC10 series windlasses. With a maximum pull of 1590 kg (3500 lb), and an anchor retrieval rate of 15 m/min (50ft/min), the RC12-12 is one of the fastest and gruntiest windlasses in its class. The elegantly designed deckplate and chainpipe cover are manufactured in polished marine-grade (AISI 316) stainless steel, as are the heavy duty pressure arm, stripper, chainwheel and fluted capstan drum. The huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Double cone-type brake/clutch mechanism permits 'Free Fall' anchoring. Cone clutches, unlike dog clutches, provide smooth progressive engagement, ensuring safe and precise operator control. The RC12 features Maxwell's revolutionary and patented new Wave DesignT chainwheel. Emergency manual retrieval is made simple and easy with Maxwell's unique "Active Latch Ratchet System" operation that prevents backwind of the windlass during manual hauling of the anchor. Every Maxwell RC12 automatic rope/chain windlass comes with top works, motor/gear box and dual direction solenoid. Switches and circuit breaker are available and need to be ordered separately. Activation of the ratcheted mechanism lever ensures the windlass cannot backwindduring emergency (manual) retrieval of the rode (rope and/or chain) and anchor. Important: Maxwell windlasses must be used in conjunction with a chain stopper and/or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way. Every Maxwell automatic rope/chain windlass is available with all the necessary components for fully automatic dual direction control in a competitively priced package. The Maxwell designed, and innovative black, hard anodized gearbox provides numerous advantages Fast and easy windlass installation. More corrosion resistant. Easy to maintain and service. Takes up less room in the anchor locker. 100:1 ratio, single stage design with less moving parts, for smoother and quieter operation. Allows for multi-positioning of the gearbox/motor. Specifications Voltage: 12V Motor: 1200 Watts Maximum Pull/lift: 3500 lbs Static Hold: 4840 lbs Chain Short Link: 1/2" Rope Size: 3/4" Net weight: 64 lbs Chain Speed: 50 ft/min Rope Speed: 43 ft/min This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Lightweight Intake Water Strainer - Clear Body - 1/2" Pipe Size PERKO Water Strainers are Designed for Easy Installation and Cleaning. Features Include Mounting Lugs Cast into Both Sides to Assure Universal Mounting, four outside tie rods and a 316 Stainless Steel Strainer Basket to minimize electrolysis. The diameter of the screen holes is 0.079" providing 47% open area, among the highest in the industry for cylindrical strainer baskets. Hinged Lugs for the Cast Bronze Cover Permit Easy Removal and Cleaning of the Strainer Basket. A Drain Plug in the Bottom Casting is Provided for Easily Removing Sediment and Draining for Winterizing. Features: Cast Bronze with Clear Polymer Body Our Lightest Weight Strainer Many Replacement Parts in Common with Other PERKO Strainers Specifications: Pipe Size:1/2" Height Overall:6-1/4" Width Overall: 4-1/2" Depth Overall: 8-1/2" Dimensions Cylinder - O.D. x Length: 3-1/2" x 4-1/4" Open Area Dimensions Basket: 1-13/16" x 4-3/8" Each Side Open Area Ratio: 30:1

Lightweight Intake Water Strainer - Clear Body - 3/4" Pipe Size PERKO Water Strainers are Designed for Easy Installation and Cleaning. Features Include Mounting Lugs Cast into Both Sides to Assure Universal Mounting, four outside tie rods and a 316 Stainless Steel Strainer Basket to minimize electrolysis. The diameter of the screen holes is 0.079" providing 47% open area, among the highest in the industry for cylindrical strainer baskets. Hinged Lugs for the Cast Bronze Cover Permit Easy Removal and Cleaning of the Strainer Basket. A Drain Plug in the Bottom Casting is Provided for Easily Removing Sediment and Draining for Winterizing. Features: Cast Bronze with Clear Polymer Body Our Lightest Weight Strainer Many Replacement Parts in Common with Other PERKO Strainers Specifications: Pipe Size:3/4" Height Overall:8-5/8" Width Overall: 4-1/2" Depth Overall: 8-1/2" Dimensions Cylinder - O.D. x Length: 3-1/2" x 6-5/8" Open Area Dimensions Basket: 1-13/16" x 6-1/4" Each Side Open Area Ratio: 25:1

Lightweight Intake Water Strainer - Clear Body - 1" Pipe Size PERKO Water Strainers are Designed for Easy Installation and Cleaning. Features Include Mounting Lugs Cast into Both Sides to Assure Universal Mounting, four outside tie rods and a 316 Stainless Steel Strainer Basket to minimize electrolysis. The diameter of the screen holes is 0.079" providing 47% open area, among the highest in the industry for cylindrical strainer baskets. Hinged Lugs for the Cast Bronze Cover Permit Easy Removal and Cleaning of the Strainer Basket. A Drain Plug in the Bottom Casting is Provided for Easily Removing Sediment and Draining for Winterizing. Features: Cast Bronze with Clear Polymer Body Our Lightest Weight Strainer Many Replacement Parts in Common with Other PERKO Strainers Specifications: Pipe Size: 1" Height Overall:8-3/4" Width Overall: 5-1/2" Depth Overall: 8-1/2" Dimensions Cylinder - O.D. x Length: 4-1/2" x 6" Open Area Dimensions Basket: 2-5/8" x 5-7/8" Each Side Open Area Ratio: 20:1

Rope and Chain Pipe

Material: C.P. Brass Fastener: #10 (4) Flange: 6-1/8" x 4-3/8" Inside Diameter: 4" x 2-1/4"