|
Rope and Chain Deck Pipe (Chrome)
(0750)
Chrome Plated
The Cover Has a Hook for Hanging Chain and Stainless Steel Cable Retainer
Opening for Chain Size: 3/8"
Dimensions Flange: 5-1/4" x 4"
Height Overall: 1-3/8"
|
157.19 |
|
|
Chrome Brass Hinged Chain Deck Pipe
This Hinged Chain Deck Pipe facilitates the storage of anchor lines out of the way below deck, reducing the risk of trip hazards on deck. The circular pipe features a hinged cap for easy access. Chain can remain in slot when the cover is closed. Constructed of die cast chrome plated brass. Installs with four #8 FH fasteners (not included).
|
30.49 |
|
|
Rope Deck Pipe
(0757)
Chrome Plated Zinc Alloy
Max Rope Size 1"
O.D. Flange: 3-3/8"
|
32.00 |
|
|
Description: 316 S.S. Hinged Chain & Rope Deck Pipe
Inside diameter - 3-7/8" x 2-1/2"
Flange - 4-1/8" x 2-7/8"
Fastener - #12(4)
Max. Rope Diameter - 1-1/4"
Slide top to right to lock into place.
|
88.63 |
|
|
RC10-10 Capstan Windlass 12V - 3/8" Chain & 5/8" Rope
The combined stainless steel and chromed bronze RC10 fully automatic windlass series is designed to effortlessly retrieve and deploy 8mm (5/16") and 10mm (3/8") short link chain and 14mm and 16mm (5/8") three strand or 8-brait (plait) rope.
A sleek, Low Profile version and a fluted stainless steel capstan drum version, are available.
Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations.
Full disassembly capability of the topworks utilising only the handle provided and an Allen key.
The RC10 is manufactured from marine-grade 316 stainless steel and chromed bronze for long term durability. The heavy duty stainless steel pressure arm, coupled with the unique rope/chain gypsy, is designed to effectively grasp the splice between rope and chain, giving the RC10 an unparalleled level of performance.
In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm pivots on a trouble free bearing, thereby exerting maximum control pressure on the rode and splice.
The RC10 works just as effectively with all chain rodes for those who desire a Low Profile, elegantly styled windlass on their foredeck. Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.
Cone type clutch/brake mechanism permits manual, Free Fall anchoring. Sealed oil bath and marine-grade hard anodized, alloy gearbox provides maximum output via a precision worm and worm wheel.
Features:
Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.
Cone type clutch/brake mechanism permits manual, Free Fall anchoring.
Sealed oil bath and marine-grade hard anodised, alloy gearbox provides maximum output via a precision worm and worm wheel.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2193.76 |
|
|
HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with Capstan
Designed for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses proudly follow in the highly successful footsteps of Maxwell's previous, fully automatic rope / chain anchor winches.
Kit Includes
Windlass
On/Off Breaker Panel
Reversing Solenoid
Up/down Panel Switch
Clutch Release Handle
Features
The HRC10-8 is Maxwell's fully automatic rope/ chain or all chain horizontal windlass
Designed to effortlessly retrieve and deploy 8mm (5/16" ) chain and 16mm (5/8" ) three strand or 8-brait (plait) rope.
The HRC 10-8 has a patented uniquely designed chain wheel will accommodate ANY 5/16" or 8 mm marine grade chain spliced to 5/8" rope.
The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck
Case Material: Anodized Aluminum
The two part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section.
This two piece watertight case allows for quick and easy, on-deck,routine maintenance.
Simple " bolt down" installation ensures effortless and rapid on-deck installation and set up.
The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain).
The new and revolutionary patented Wave Design chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series.
The unique Maxwell " wrap around" horizontal chainwheel ensures that more than 90x of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs.
High quality Stainless Steel chainwheels
The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system.
The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope / chain rode into and out of the anchor locker.
Cone type clutch/brake mechanism permits manual, "free fall" anchoring and emergency crank recovery of the rode and anchor if required.
The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel.
Exclusive Maxwell 3 YEAR Limited Warranty
Specifications
Maximum PUll: 1540 lbs
Chain Short Link: 5/16" or 8mm
Chain Speed (Anchor Retrieval): 79 ft per Minute
Rope Speed (Anchor Retrieval): 65 ft per Minute
Rope Size (Nylon 3 strand or 8 Plait): 5/8"
Power Supply (DC): 12VDC
Motor Power: 1000 Watts
Net weight: 42 lbs
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2213.51 |
|
|
HRC10 Horizontal Rope Chain Windlass - 12V No Capstan 3/8" Chain, 5/8" Rope
Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlass has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system.
The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.
The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.
As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.
Features:
Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck
2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section
2-piece watertight case allows for quick and easy, on-deck, routine maintenance
Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up
Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain)
Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters
Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs
The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system
The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required
=
The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2410.33 |
|
|
HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" Rope
Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlasses has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system.
The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.
The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.
As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.
Features:
Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck
2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section
2-piece watertight case allows for quick and easy, on-deck, routine maintenance
Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up
Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain)
Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10
Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs
Works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system
The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required
The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2328.16 |
|
|
RC10/10 24V Capstan Windlass for 3/8" Chain & 5/8" Rope
The combined stainless steel and chromed bronze RC10 fully automatic windlass series is designed to effortlessly retrieve and deploy 8mm (5/16_) and 10mm (3/8") short link chain and 14mm and 16mm (5/8") three strand or 8-brait (plait) rope.
Features:
A sleek, Low Profile version and a fluted stainless steel capstan drum version, are available
Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass
Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations
Full disassembly capability of the topworks utilising only the handle provided and an Allen key
The RC10 is manufactured from marine-grade 316 stainless steel and chromed bronze for long term durability
The heavy duty stainless steel pressure arm, coupled with the unique rope/chain gypsy, is designed to effectively grasp the splice between rope and chain, giving the RC10 an unparalleled level of performance
In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm pivots on a trouble free bearing, thereby exerting maximum control pressure on the rode and splice
The RC10 works just as effectively with all chain rodes for those who desire a Low Profile, elegantly styled windlass on their foredeck
Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
Cone type clutch/brake mechanism permits manual, Free Fall anchoring
Sealed oil bath and marine-grade hard anodised, alloy gearbox provides maximum output via a precision worm and worm wheel
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2271.18 |
|
|
Anchor Rode 5' of 1/4" G4 Chain & 100' of 1/2" Rope with Shackle
This Lewmar 105' anchor rode kit features 5 feet' of windlass chain spliced to 100' of 3-strand line and comes with a D shackle.
Features:
Specifically made to go with the rope-chain gypsies that come standard on all Lewmar windlasses
Calculated for an even pitch
The hot-dip galvanizing reduces corrosion
High-strength welding
Your windlass runs more smoothly with a smooth rope-to-chain transition
Hand-sewed whipping assures unraveling
Technical Specifications:
Total Length: 105 ft.
Chain Length: 5 ft.
Chain Size: 1/4 in.
Chain Type: G4
Rope Length: 100 ft.
Rope Size: 1/2 in.
Rope Type: 3 Strand
Shackle: 5/16 in. D
*Sold as an Individual
|
212.86 |
|
|
Anchor Rode 215'-15' of 1/4" Chain & 200' of 1/2" Rope with Shackle
This Lewmar 215' anchor rode kit features 15 feet' of windlass chain spliced to 200' of 3-strand line and comes with a D shackle.
Technical Specifications:
Total Length - 215'
Chain Length - 15'
Chain Size - 1/4"
Chain Type - G4
Rope Length - 200'
Rope Size - 1/2"
Rope Type - 3 Strand
Shackle - 5/16" D
*Sold as an Individual
|
372.62 |
|
|
Premium Anchor Rode 215'-15' of 1/4" Chain & 200' of 1/2" Rope w/Shackle
This Premium Lewmar 215' anchor rode kit features 15 feet' of windlass chain spliced to 200' of 8 Plait line.
Features:
Eight (8) Plait rope is woven together with eight (8) individual braided strands. Outperforms the 3-strand once it is wet and used.
Technical Specifications:
Total Length - 215'
Chain Length - 15'
Chain Size - 1/4"
Chain Type - G4
Rope Length - 200'
Rope Size - 1/2"
Rope Type - Eight (8) Plait
Shackle - Not included
*Sold as an Individual
|
507.36 |
|
|
Free-Fall Anchor Windlass
Part #: P777727
Automatic Helm-Operated Free-Fall Windlass For The Safest Way To Anchor!
Benefits of Free-Fall over Power-Down:
Free-Fall System anchors up to 300'/min - Up to four times faster than powering down
Exclusive stainless steel rope & chain guidance system - Durable materials stand up to years of use
Ultra smooth motor uses less amps - Free-fall does not need battery power so it preserves your battery
Built with durable stainless steel fasteners - Resists corrosion for easy removal
Watertight seals - For additional protection against corrosion
One piece motor plate - For smooth power transmission & improved gear life
Heat treated oil-impregnated gear systems -Smoother operation, resists corrosion, lasts longer
Stainless steel drive shafts - For years of smooth, reliable performance
Replaceable Rode-Glide - Smoothly channels rope and chain below deck
Use tapered back splice - For smooth rope-to-chain transition
|
765.43 |
|
|
World's Best Rope Handle Bucket - 3.5 Gallon - White
Forget about rusty metal handles! An innovative rope handle design does not pierce the bucket cavity, which means no leaks or hardware failure. Because weight is distributed across the base of the rope, it won't tear the lip under heavy loads. The tough, heavily molded plastic is designed to last, making it the best bucket around!
Makes for an Excellent:
Boat bucket
RV bucket
Car wash bucket
Storage bucket
Trash bucket
Fishing Bucket
Specifications:
Color: White
Size: 3.5-gallon bucket
Dimensions (inch): 10.75" H x 12" W
|
27.58 |
|
|
World's Best Rope Handle Bucket - 3.5 Gallon - Black
Forget about rusty metal handles! An innovative rope handle design does not pierce the bucket cavity, which means no leaks or hardware failure. Because weight is distributed across the base of the rope, it won't tear the lip under heavy loads. The tough, heavily molded plastic is designed to last, making it the best bucket around!
Makes for an Excellent:
Boat bucket
RV bucket
Car wash bucket
Storage bucket
Trash bucket
Fishing Bucket
Specifications:
Color: Black
Size: 3.5-gallon bucket
Dimensions (inch): 10.75" H x 12" W
|
27.58 |
|