|
Marine Plumbing & Ventilation
The plumbing and ventilation systems are two of the most important aspects of your boat. It is very important that any toilet facilities work properly, and you also need to ensure that there is adequate ventilation for the engine and to remove any fumes that can build up in passenger compartments or similar areas. With our marine plumbing and ventilation parts and accessories, you have what you need all in one place, right at your fingertips. From air conditioning & refrigeration supplies to bilge pumps, fans, and hot water heaters, we have it all under one roof.
We carry several brands and can offer Livewell pumps and transfer pumps, along with several marine sanitation options. Portable toilets are an excellent choice for boats that are large enough to accommodate them, but the comfort of your passengers is not the only thing to be aware of. You also need to make sure you have adequate engine cooling pumps, and that any washdown / pressure pumps work correctly. With a WaterMaker pump, quality fittings, and the right blowers & heaters for your boat, you can ensure that your boat will operate correctly and your passengers will have the comfort and convenience they need.
|
|
|
Date: March 1, 2011
Field Notice Number: 311-C11
Models or Product Affected: Cruisair & Marine Air Systems
Immediate Action Is Required In Order To Avoid Damage To Your Vessel
Please see these two PDF's
311-C11_POE-Oil-With-CPVC-Plumbing
301-F10_Antifreeze Mandatory For Chillers
|
|
|
Taku
Keep Cool With This Easy-To-Install Hatch Fan
Keep cool with this easy-to-install hatch fan featuring push button controls, LED lamp, and suction cup mounts. With a pivoting axis, this versatile fan can be swiveled to exhaust air out of the cabin or to bring fresh air in. Not just a hatch fan, the versatile 12 Volt Taku can also be swung down into the cabin and swiveled 360° to direct a cooling breeze right where you want it. Installs on most hatches 19″ across and larger. The Taku comes equipped with 20′ of fully annealed (tinned), corrosion resistant wire.
Closeouts Rebates Remanufactured Specials
|
|
|
ALTUS Ventilation Hatch - OD 13-1/8" x 13-1/8"
ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight.
They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate.
Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
An aluminum counter flange and a mosquito screen are available for these hatches.
Features:
External Dimensions - 13 1/8" x 13 1/8"
Cut Out Dimensions - 10 1/4" x 10 1/4"
Number of Handles - 1
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
285.84 |
|
|
MAGNUS Ventilation Hatch - OD 12-5/16" x 12-5/16"
Heavy Duty Ocean Hatch
MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck.
These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are currently in the market.
Features:
External Dimensions - 12 5/16"" x 12 5/16"
Cut Out Dimensions - 10 1/4" x 10 1/4"
Number of Handles - 1
*VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
317.52 |
|
|
Ultimate 757 12V 2-Speed 7" Fan - Direct Wire - White
Direct wire only. FingerSafe blade allows for maximum airflow. Two-speed options.
The 757 Ultimate 12V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment.
Features:
Two speeds
Direct wire
Comes with a permanent mounting option
Long life, low power drawing motor
Adjustable base and tilting head
Benefits:
Maximum airflow
Easy to clean
Easy to install
Quiet, dependable operation
Direct air in any direction
Match any boat interior
The fan stays in place in rough seas
|
46.58 |
|
|
Ultimate 757 12V 2-Speed 7" Fan - Direct Wire - Black
Direct wire only. FingerSafe blade allows for maximum airflow. Two-speed options.
The 757 Ultimate 12V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment.
Features:
Two speeds
Direct wire
Comes with a permanent mounting option
Long life, low power drawing motor
Adjustable base and tilting head
Benefits:
Maximum airflow
Easy to clean
Easy to install
Quiet, dependable operation
Direct air in any direction
Match any boat interior
The fan stays in place in rough seas
|
46.58 |
|
|
Ultimate 757 24V 2-Speed 7" Fan - Direct Wire - White
Direct wire only. FingerSafe blade allows for maximum airflow. Two-speed options.
The 757 Ultimate 24V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment.
Features:
Two speeds
Direct wire
Comes with a permanent mounting option
Long life, low power drawing motor
Adjustable base and tilting head
Benefits:
Maximum airflow
Easy to clean
Easy to install
Quiet, dependable operation
Direct air in any direction
Match any boat interior
The fan stays in place in rough seas
|
61.69 |
|
|
Ultimate 757 24V 2-Speed 7" Fan - Direct Wire - Black
Direct wire only. FingerSafe blade allows for maximum airflow. Two-speed options.
The 757 Ultimate 24V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment.
Features:
Two speeds
Direct wire
Comes with a permanent mounting option
Long life, low power drawing motor
Adjustable base and tilting head
Benefits:
Maximum airflow
Easy to clean
Easy to install
Quiet, dependable operation
Direct air in any direction
Match any boat interior
The fan stays in place in rough seas
|
64.16 |
|
|
Cowl Ventilator
Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. Plastic vents are corrosion-resistant, will not discolor. All collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross sectional area requirements.
For use with 3" I.D. wire-supported ventilation hose. Features flexible hose flange that is screwed onto hose, then vent snaps onto the flange. Vent constructed of chrome-plated die-cast Perma-Plate® ZAMAK. Flange is non-corrosive plastic. Installs with #8 screws.
Installation Hole Size: 3-1/4" to 3-1/2"
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.49 |
|
|
|
|
|
Kona 817 12V 3-Speed 7" Waterproof Fan - White
Weatherproofing allows the fan to be placed in an exposed environment. Includes either suction cup or screw down base for mounting. 3 speed.
The only weatherproof fan on the market! Rated at IP55, the model 817 Kona 12 Volt fan is designed to hold up in the most demanding marine conditions. Featuring a watertight motor and constructed of extruded aluminum, UV stabilized plastic and stainless fasteners the Kona is ideal for environments such as the wheelhouse dash or an exposed bridge or cockpit where splash and spray would spell disaster for other fans. The 3-speed motor allows for any onboard task. The standard lighter-plug adapter and suction cup mount option allow this fan to be moved wherever it is needed on the boat - above or below deck.
Features:
Lighter plug included
Locking base
Two installation options - permanent mount or cam locked suction cup
3-speed motor
Weatherproof
IP55 rated against dust and spray
Locking base
12 volt lighter plug included
Low power draw
Made in Canada
Benefits:
Can be left in rain or boat spray
Easy to Install
Battery-friendly
Fan stays in place in rough seas
Corrosion resistant
|
149.71 |
|
|
Kona 817 12V 3-Speed 7" Waterproof Fan - Black
Weatherproofing allows the fan to be placed in an exposed environment. Includes either suction cup or screw down base for mounting. 3 speed.
The only weatherproof fan on the market! Rated at IP55, the model 817 Kona 12 Volt fan is designed to hold up in the most demanding marine conditions. Featuring a watertight motor and constructed of extruded aluminum, UV stabilized plastic and stainless fasteners the Kona is ideal for environments such as the wheelhouse dash or an exposed bridge or cockpit where splash and spray would spell disaster for other fans. The 3-speed motor allows for any onboard task. The standard lighter-plug adapter and suction cup mount option allow this fan to be moved wherever it is needed on the boat - above or below deck.
Features:
Lighter plug included
Locking base
Two installation options - permanent mount or cam locked suction cup
3-speed motor
Weatherproof
IP55 rated against dust and spray
Locking base
12 volt lighter plug included
Low power draw
Made in Canada
Benefits:
Can be left in rain or boat spray
Easy to Install
Battery-friendly
Fan stays in place in rough seas
Corrosion resistant
|
149.71 |
|
|
Kona 817 24V 3-Speed 7" Waterproof Fan - White
Weatherproofing allows the fan to be placed in an exposed environment. Includes either suction cup or screw down base for mounting. Variable speed.
The only weatherproof fan on the market! Rated at IP55, the model 817 Kona 24 Volt fan is designed to hold up in the most demanding marine conditions. Featuring a watertight motor and constructed of extruded aluminum, UV stabilized plastic and stainless fasteners the Kona is ideal for environments such as the wheelhouse dash or an exposed bridge or cockpit where splash and spray would spell disaster for other fans. The 3-speed motor allows for a multitude of settings for any onboard task.
Features:
Locking base
Two installation options - permanent mount or cam locked suction cup
3-speed motor
Weatherproof
IP55 rated against dust and spray
Locking base
Low power draw
Made in Canada
Benefits:
Can be left in rain or boat spray
Easy to Install
Battery-friendly
Fan stays in place in rough seas
Corrosion resistant
|
169.25 |
|
|
Kona 817 24V 3-Speed 7" Waterproof Fan - Black
Weatherproofing allows the fan to be placed in an exposed environment. Includes either suction cup or screw down base for mounting. Variable speed.
The only weatherproof fan on the market! Rated at IP55, the model 817 Kona 24 Volt fan is designed to hold up in the most demanding marine conditions. Featuring a watertight motor and constructed of extruded aluminum, UV stabilized plastic and stainless fasteners the Kona is ideal for environments such as the wheelhouse dash or an exposed bridge or cockpit where splash and spray would spell disaster for other fans. The 3-speed motor allows for a multitude of settings for any onboard task.
Features:
Hardwired
Locking base
Two installation options - permanent mount or cam locked suction cup
3-speed motor
Weatherproof
IP55 rated against dust and spray
Locking base
Low power draw
Made in Canada
Benefits:
Can be left in rain or boat spray
Easy to Install
Battery-friendly
Fan stays in place in rough seas
Corrosion resistant
|
162.74 |
|