Black Box Modules

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

GPSMAP® 8700 Black Box Fully Integrated Black Box System Compatible with a single Garmin monitor or third-party touchscreen monitor Full support for the range of Garmin black box sonar products, including the GSD™ 26 CHIRP Professional Sonar Module, Panoptix™ LiveScope system and the entire Panoptix™ all-seeing sonar line (all transducers sold separately) Integrates internal sonar sharing, multiple black box sonars, Ultra High-Definition ClearVü and SideVü scanning sonars, autopilot, connected services, apps, engine data and more Pairs with external GPS 19x 10 Hz GPS and GLONASS receiver to update position and heading 10 times per second Preloaded worldwide basemap; compatible with BlueChart® g3 charts featuring integrated Navionics® data and Auto Guidance¹ technology  Just Add Monitors Give your vessel tremendous capabilities and features that are fully integrated across your entire marine system. This black box system is compatible with Garmin marine monitors or third-party touchscreen monitors (sold separately), allowing you to add to your current helm configuration or build a beautiful, new fully integrated glass helm.   Build Your Fully Integrated Marine System The GPSMAP 8700 black box allows you to add and integrate multiple sonar technologies as well as autopilot, connected services, apps, engine data and multimedia at your helm. You can also automatically sync your personal preferences and user data for all networked chartplotters across multiple helms. Everything you need can conveniently be found at your fingertips — on any touchscreen. NMEA 2000® networking and the Garmin Marine Network allow you to easily build your full marine electronics suite — from radar and autopilots to cameras, instruments and forward-looking sonar — controlled from your chartplotter and shared across multiple screens. In addition, our exclusive OneHelm™ system coordinates many third-party manufactured onboard marine products to bring full control of systems — such as digital switching, lighting, stabilization and more — to your touchscreen monitor. Pair with GPS 19x 10 Hz GPS and GLONASS Receiver The GPSMAP 8700 black box can pair with our GPS 19x external 10 Hz GPS and GLONASS receiver (sold separately) to update your position and heading 10 times per second. It displays a more fluid vessel movement and dramatically improves your ability to accurately mark and navigate to 5,000 waypoints. Requires Garmin Card Reader The Garmin Card Reader (sold separately) provides convenient remote mounting and a single access point for 2 SD™ card slots for mapping. You can add multiple card readers for additional access points. A water-resistant magnetic door allows card reader to be mounted horizontally or vertically. Add Garmin Charts or Maps with Navionics Data Upgrade your maps with the most detailed, clear and concise charts and maps. Just add accessory map purchases such as BlueChart g3 and BlueChart g3 Vision coastal cartography and LakeVü g3 and LakeVü g3 Ultra inland mapping featuring Navionics data and Auto Guidance¹ technology. Auto Guidance technology uses your specified depth and overhead clearance to easily calculate routes and see a suggested path to follow. It’s also compatible with Quickdraw Contours software so you can instantly create personalized fishing maps on-screen with 1’ contours as you fish. ¹Auto Guidance is for planning purposes only and does not replace safe navigation operations WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

  New Product Preview Including 3D Multi-beam Sonar & Radars For NavNet TZtouch & TZtouch2     The Miami Boat show marks the opening of an event that each year continues to set the tone for the recreational boating industry. Furuno would like to introduce the boating public to some exciting new products. We'd like to provide you with a preview of the upcoming products. The star of this year's show for Furuno is certain to be the all-new DFF3D Multi-beam Sonar. We're proud to bring 3D underwater viewing and side-scanning capabilities to our flagship NavNet TZtouch and TZtouch2 MFDs, with this all-new DFF3D black box module. This Multi-beam Sonar takes the highly-desired ability to scan port to starboard under the vessel and ups the ante by displaying unique 3D Sounder History that presents a very intuitive three-dimensional image of the seafloor, along with icons depicting fish distribution. This mode is extremely useful for locking-in on fishing hot spots and assessing the seabed condition. Leveraging Furuno's unique commercial fisheries experience and technology, the DFF3D delivers a sidebar detection range of an unprecedented 650+ feet, while also seeing down to over 1,000 feet, possibly making it the only Sounder many fishermen will need! The DFF3D is scheduled to begin shipping later this spring and will initially be paired with an all-new, motion stabilized multi-beam, thru-hull transducer. Additional transducer options, including a transom mount version, will be available later in the year. Please take a few moments to check out the videos below and accompanying DFF3D brochure that will introduce you to the many features, abilities and benefits of this revolutionary new fishing machine from Furuno!         Enhancing NavNet TZtouch and TZtouch2 sensor options doesn't stop with the DFF3D Multi-beam Sonar. Furuno's already extensive and award-winning DRS family of ultra-high definition Radar sensors is expanding. With the 2016 introduction of the DRS6AX X-Class Radar, Furuno raised the bar on performance for traditional X-Band recreational Radar. Now, we're moving that bar up a couple more notches with two new, high-power X-Class Radar options for NavNet TZtouch and TZtouch2, the DRS12AX and DRS25AX. These two new Radars not only deliver incredibly high performance and useful features, but do so at an extremely competitive price. Scheduled to commence delivery this spring. As with other open array DRS Radars, these new models can be paired with a number of antenna options, ranging in size from 3.5 to 6 feet. Check out the below video on the newly expanded line of X-Class Radars, and download updated brochures for NavNet TZtouch and TZtouch2, which now include product info for these new Radars and the DFF3D Multi-beam Sonar.     In addition to new Sonar and Radar options, NavNet TZtouch2 MFD's will soon provide extensive and valuable data to owners of Yamaha's most popular outboard engines. Furuno is one of the first manufacturers to integrate an MFD with Yamaha Engines, to display gauges and other important information. Furuno collaborated closely with Yamaha to create the interface, while designing the gauges to emulate Yamaha's familiar look and feel. NavNet TZtouch2 interfaces with Yamaha's Helm Master®, Command Link® and Command Link Plus® to bring engine data across the network. This marriage of helm navigation and engine data places all of this critical information at the operator's fingertips, making TZtouch2 a truly turnkey solution for many boats. While this integration will require the purchase of an inexpensive gateway module from Yamaha, the availability of this data on a TZtouch2 MFD will be a no-cost upgrade for customers, as it will be incorporated into an upcoming TZtouch2 software update, coming this spring. While there will be a formal introduction when the software update becomes available, you can get more detailed info on this exciting integration between TZtouch2 and Yamaha engines by reviewing the product brochure.     Yamaha Engine Gauges on TZTL15F MFD   The new product excitement is not only confined to NavNet TZtouch and TZtouch2. Furuno is also pleased to be premiering our latest standalone Radar model, the all-new 1815 Color LCD Radar. The Furuno 1815 assembles some of the very best features of our latest commercial and network models, presenting them in a compact and durable standalone Radar package that includes a stylish, low-profile 4kW Radome antenna, packaged with an 8.4" color LCD display that is a cosmetic match to the extremely popular FCV588 Fish Finder.   The 1815 is designed for a wide variety of vessels, including pleasure craft, workboats and small fishing boats that require an easy-to-use, true color Radar, at an affordable price point. This compact Radar incorporates many of Furuno's latest Radar features, including Furuno's Fast Target Tracking (TT) function, which allows the user to manually or automatically track up to 10 targets. In addition to TT, the 1815 can also display up to 100 AIS targets, when interfaced with an AIS Receiver and applicable sensors. Another useful feature is Furuno's proprietary True Trail mode. With True Trails, moving objects will show a gradation trail of the target in their wake, making it possible to gauge the directional movement of targets at a glance. These features, combined with Furuno's unique True View mode, make reading the display easier and more intuitive, even for novice navigators. The full-featured 1815 Radar will be a very economical upgrade for boaters. For more specific details on the all-new 1815 compact, standalone Radar, be sure to check out the 1815 product brochure.     As you can see, Furuno is going to provide our mutual boating customers with a number of new product surprises. To see these products in action, we trust this New Product Preview will provide you with the latest and greatest info on these upcoming offerings. All Furuno products can be purchased at CLR Marine our Authorized Furuno Reseller.      Specials   Closeouts    Remanufactured    Rebates  

i50 SeaTalkng Instruments - Tridata with Thru-Hull Transducer The i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays. For the ultimate in flexibility, the i50 Instruments support SeaTalkng CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of the i50 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument has a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i50 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase. i50 Tridata Instrument  The i50 Tridata is a convenient 3-line instrument that combines the Speed and Depth Instruments functions into one display. This makes the i50 Tridata ideal for installations on helms where space is a premium or as a depth and speed repeater solution for other locations on the boat. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Use a primary display or as a repeater of i50 depth and speed instruments Built-in depth and speed transducer connections M78713-PZ Nylon Depth Transducer with 45ft cable E70673 ST900/P120 S/T Thru Hull - 13.7m Cable The i50 Tridata's 3-line LCD can show current depth, current speed, distance log, trip log, and water temperature. Additional display modes include maximum speed, average speed, and VMG to windward. Tridats have a count-up timer and 2 race start timers for racers. Tridata's robust alarm functions include a shallow depth alarm, deep depth alarm, shallow anchor alarm, and deep anchor alarm. Features: Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems. Large, crisp LCDs with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70, and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

GND™ 10 Black Box Bridge The Garmin GND 10 black box bridge seamlessly integrates Nexus instruments and sensors with the Garmin family. It converts data between the Nexus network and NMEA 2000 to provide trouble-free compatibility between Nexus and Garmin products including gWind and gWind Race wind transducers. Simple plug-and-play installation between Nexus and NMEA 2000, with USB connectivity eliminates need for user setup and system configuration. GND 10 allows PC applications, such as NexusRace, Expedition, Adrena or SeaTrack, to communicate sailing-specific functions between Nexus and NMEA 2000 networks. It also enables GND 10 software updates over NMEA 2000. Existing NexusRace PC application can be used to update software, configure and calibrate Nexus devices over USB using the FDX protocol. Features: Converts data between the Nexus network and NMEA 2000 Provides trouble-free compatibility between Nexus and Garmin products Simple plug-and-play installation between Nexus, NMEA 2000 and USB No user setup or system configuration required Allows PC applications such as NexusRace, Expedition, Adrena, or SeaTrack, to communicate sailing specific functions between Nexus and NMEA 2000 networks Enables GND 10 software updates over NMEA 2000 Existing NexusRace PC application can be used to update software, configure, and calibrate Nexus devices over USB using the FDX protocol Lighting levels of Nexus Marine instruments can be set from equipment connected to NMEA 2000 Allow setting and resetting of race start timers and distance logs from Garmin equipment connected to the NMEA 2000 network In The Box GND 10 USB Mini-B cable NMEA 2000® drop cable (2 m) NMEA 2000 T-connector Nexus network cable (5 m; straight connector) Mounting hardware Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12V LED Bi-Color Navigation Light - Black Features: High tech, self-contained LED modules New stylish designs: Classic or Rounded Variety of top options: Plain or Stainless Steel Standard Colors: Black or White 2-Mile (USCG 2nm) Certified Meets global specifications for EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU & USCG 33 CFR - 2nm Specifications: Voltage: 12 Volt LED Amperage: 0.21 amps Wattage: 2.5 watts Screw Size: #6 P.H.

12V LED Bi-Color Navigation Light - Black/Stainless Steel Features: High tech, self-contained LED modules New stylish designs: Classic or Rounded Variety of top options: Plain or Stainless Steel Standard Colors: Black or White 2-Mile (USCG 2nm) Certified Meets global specifications for EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU & USCG 33 CFR - 2nm Specifications: Voltage: 12 Volt LED Amperage: 0.21 amps Wattage: 2.5 watts Screw Size: #6 P.H.

12V LED Bi-Color Navigation Light - Black Rounded Features: High tech, self-contained LED modules New stylish designs: Classic or Rounded Variety of top options: Plain or Stainless Steel Standard Colors: Black or White 2-Mile (USCG 2nm) Certified Meets global specifications for EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU & USCG 33 CFR - 2nm Specifications: Voltage: 12 Volt LED Amperage: 0.21 amps Wattage: 2.5 watts Screw Size: #6 P.H.

gWind™ Transducer with GND™ 10 Black Box Bridge The Garmin gWind Transducer features twin-fin technology with three-bladed propeller for more accurate True Wind Speed (TWS) in lighter air while the twin fin design gives a more stable True Wind Angle (TWA). The three-bladed propeller, unlike a cups design, is always efficient. Combined with optic reading this transducer provides superior accuracy at low wind speeds and also provides for excellent linearity. Included GND 10 black box bridge enables the Nexus Network and compatible Garmin chartplotters to share critical NMEA 2000 data. The GND 10 enables Garmin chartplotter owners to use Nexus sail equipment and vice versa. Features: Three-bladed propeller for more accurate True Wind Speed (TWS) in lighter air Twin-fin design gives a more stable True Wind Angle (TWA) Optic reading technique makes this transducer superior at low wind speeds and provides for excellent linearity GND 10 black box bridges NMEA 2000 data to Nexus Network and enables Garmin compatible chartplotters to work with Nexus sail equipment and vice versa Easy plug-and-play installation between Nexus, Garmin chartplotters, NMEA 2000 and USB networks GND™ 10 Black Box Bridge The GND 10 black box bridge seamlessly integrates Nexus instruments and sensors with the Garmin family. It converts data between the Nexus Network and NMEA 2000 to provide compatibility between Nexus and Garmin products, including gWindT, gWindT Wireless and gWindT Race transducers. Simple plug-and-play installation between Nexus and NMEA 2000, with USB connectivity, eliminates the need for user setup and system configuration. GND 10 allows PC applications, such as NexusRace, Expedition, Adrena or SeaTrack, to communicate sailing-specific functions between Nexus and NMEA 2000 networks. It also enables GND 10 software updates over NMEA 2000. Existing NexusRace PC application can be used to update software, configure and calibrate Nexus devices over USB using the FDX protocol. Features: Converts data between the Nexus network and NMEA 2000® Provides compatibility between Nexus and Garmin products Simple plug-and-play installation between Nexus, NMEA 2000 and USB No user setup or system configuration required Allows PC applications, such as NexusRace™, Expedition, Adrena or SeaTrack, to communicate sailing-specific functions between Nexus and NMEA 2000 networks In The Box gWind transducer GND™ 10 NMEA 2000® drop cable (2 m) NMEA 2000 T-connector Mast cable with female connector (25 m) Nexus female field installable connector Mast bracket Mounting hardware Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ray91 Modular Dual-Station VHF Black Box Radio System with AIS The Ray91 modular VHF radio brings dual-station communications and traffic management to a whole new level of power, performance, and flexibility. The Ray91 is a black-box design with a transceiver that hides out of sight while the ergonomic RayMic handset and remote speaker provide full control of the radio with crystal clear audio. Features: Black box, dual-station capable VHF radio Built-in Automatic Identification System (AIS) Class B Receiver Wired handset and passive speaker included Expandable to 2 RayMic handsets Built-in loudhailer and fog signal generator Optional external GPS receiver and Class D Digital Selective Calling Simple NMEA2000 and NMEA0183 Networking The Ray91 is also equipped with an integrated Automatic Identification System (AIS) receiver. Us the Ray91 to receive navigation and safety broadcasts from nearby AIS-equipped vessels and share them over NMEA2000 or NMEA0183 with compatible MFDs. AIS equipped vessels can easily be identified along with their vessel name, course, speed, CPA, and other voyage information. Communications Powerhouse Ray91 is equipped with a powerful 25-watt transmitter and commercial grade electronics for long life and superior performance. Channel scanning, dual-watch, tri-watch and weather alert are standard. Class D Digital Selective Calling radio and integrated GPS makes setting up the advanced safety and calling features easy. Simply input your vessel’s MMSI number during setup and you’re ready to go. For GPS operation the optional GA150 passive GPS antenna is required. Position Tracking Use Ray91’s position tracking feature to keep tabs on up to 5 nearby DSC equipped vessels. Their positions are automatically shared with your Raymarine MFD. Keep an eye on other boats in your cruising party, monitor vessels of interest, or manage your local fleet. In Europe the Ray91 supports the ATIS system on navigable inland waterways. Loudhailer Ray91’s built-in loudhailer will make you heard on-deck and across the harbour. Connect an optional hailing horn and make your presence known with 30-watts of audio output, plus 2-way talkback. When things get foggy, the loudhailer can be set to automatically sound required fog signals for power and sailing vessels underway and at anchor. Waterproof & Ruggedized Ray91’s transceiver unit is cast in solid aluminum for shock and vibration resistance and maximum heat dissipation. RayMic handsets feature super-bright backlighting for easy viewing in all conditions and oversized keys provide a sure grip with easy access to commonly used functions. The Ray91 system includes 1 wired handset and a passive speaker kit. Expand your system with an additional wired station to keep you in communication from the tuna tower, flying bridge, helm, salon or even in staterooms! No matter how small or how large your vessel is, the Ray91 from Raymarine has all the power and performance you need for essential communications, safety and situational awareness on the water.

NavNet TZtouch2 Black Box Chartplotter/Fishfinder Total Control, Simply Refined With the ability to drive multiple monitors with full HD HDMI video output in any combination of monitor aspect ratios (4:3 and 4:3, 16:9 and 4:3, or 16:9 and 16:9), a refined graphical user interface, and a built-in RezBoost Fish Finder, Furuno's NavNet TZtouch2 Black Box is a beauty to behold and use. Whether you are searching for hot fishing grounds, plotting your next route, or using your Radar to navigate through fog, NavNet TZtouch2 delivers smooth operation with familiar touch gestures. Simply Refined, Simply Beautiful Following in the footsteps of the original NavNet TZtouch, TZtouch2 features a refined user interface that is all about usability. Elegantly designed, NavNet TZtouch2 allows you to build a navigation suite that is not only functional, but offers a luxurious look and feel. Taps, swipes, pinches, and custom multi touch gestures are instantly transformed into action, giving you full control of every component connected to your network. Incredibly easy-to-use controller and graphical user interface The optional MCU005 NavNet TZtouch2 Black Box controller enhances the built-in Multi Touch graphical user interface, and sets a new benchmark for "easy to use" in the marine electronics industry. This interface is not only intuitive, but is as easy to use as the phone in your pocket. The combination of an ergonomically designed, logical controller, along with a touch-screen Graphical User Interface, make operation simple. With taps, slides and swipes, you will be up and using your TZtouch2 in no time at all. Menus and other features slide out from each of the sides of the screen, ensuring that the most important tasks are literally right at your fingertips. The available MCU004 Remote Control option features a large rotary knob which can be utilized for zooming in/out, while the joy stick allows you to pan around the chart and move the cursor on the screen. The MCU004 remote has 8 dedicated buttons that operate different functions, such as Edge Swiping, Home, Stand By/Auto for Autopilot control, MOB, and Center on vessel. Powerful Fish Finder with built-in Furuno features The built-in Fish Finder is a dual-frequency (50/200kHz), 600W/1kW power output sounder. It includes Furuno’s unique Bottom Discrimination and AccuFish modes, and also incorporates another new Furuno proprietary Fish Finder technology, called RezBoost. RezBoost is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fantastic target resolution and separation, without the need to change out your transducer, or purchase expensive broadband transducers. With RezBoost, you can now achieve target separation and resolution that was previously limited to Furuno commercial-grade Fish Finders. Freedom to build the helm of your dreams NavNet TZtouch2 is a component-based system that utilizes Furuno’s award winning network products. You can add a variety of UHD Radars, from a 4kW NXT Dome up to a 25kW X-Class Open Array. As with NavNet TZtouch, you can integrate, display, and control the NavPilot Autopilot, and Furuno’s FI70 Instrument. Both of these products have displays that match TZtouch2, giving your helm a beautiful all-glass finish. Additional sensors that can be added to the network include AIS, Weather Fax, Sirius/XM Satellite Weather, Fusion Marine Stereo, and IP Cameras, as well as NMEA2000 and Furuno CAN bus devices. It even includes one NMEA0183 output port to send data to legacy systems. Remotely view and control your bridge with apps for your smartphone and tablet  Engineered to utilize the latest technology, NavNet TZtouch opens the door to cutting edge WiFi features, such as tablet and smartphone apps, points of interest (POI), real time weather data, software updates and more. Take full control of your NavNet in a whole new way. The TZtouch Remote app allows you to operate your system remotely with your smartphone or tablet over WiFi, when connected to the network. MapMedia Raster and Vector Chart Library Freely choose the charts that fit your individual needs and preference. MapMedia's NOAA Raster and Vector charts for the U.S. Coasts, Gulf of Mexico, Alaska and Hawaii come pre-loaded. In addition, MapMedia brings you free satellite photos and detailed fishing bathymetric charts that can be download for the U.S. Outside of the U.S., "C-MAP" and "Datacore by Navionics" vector cartography can be purchased and downloaded to your NavNet with ease. MapMedia cartography integrates cutting edge algorithms with high resolution image processing techniques to deliver a fusion of digital navigation charts and satellite photography.  Satellite PhotoFusion™ offers a birds-eye view without obstruction of critical data You can load any two ultra-wide high-resolution satellite photo areas at your convenience. Land areas (zero depth) are completely opaque, so these areas are displayed as high-resolution satellite photos on the chart. As the depth increases, the satellite photography becomes more transparent. This allows you to see where the shallows end and the deeper water begins, while still allowing the raster or vector chart to be visible. Free & easy-to-use marine weather forecasts The weather tool is completely free and easy to use, giving you unlimited access to weather forecasts worldwide 24 hours a day provided by NavCenter. Select geographic coverage, data type, period of time, and then choose how to receive the file. NavNet TZtouch2 provides up to 16 days of weather forecasting. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RVX1000 3D Sonar Module The RVX1000 offers all of the sonar performance and features of Raymarine Axiom Pro in a remotely mounted black box sonar module. With Raymarine’s award winning RealVision 3D sonar technology, CHIRP Side and DownVision, plus a high powered 1kW dual channel CHIRP sonar, the RVX1000 is a versatile sonar solution for both inshore and offshore fishing. Features: 5-channel sonar with RealVision 3D, CHIRP Down and SideVision, high-frequency CHIRP and high-power 1kW CHIRP Sonar RealVision 3D with GPS Track Sonar Scroll Back – Rewind, pause, and playback recorded sonar history Raymarine’s TrueZoom™ magnification technology RealVision 3D gyro stabilization compensates for boat movement, delivering life-like 3D imagery Dual transducer connections supporting both RealVision 3D and Airmar CHIRP 1kW transducers Fast quad core processor delivers stunning 3D sonar imagery alongside CHIRP, DownVision and SideVision sonar channels without any lag or delay Specifications: Connections: 1x RVX Port = 25 pin RealVision connector | 1x 1kw Port = 11 pin 1kW connector | 1x Power connection | 1x Raynet connection Sonar: SonarRealVision 3D (CHIRP Side and DownVision, High Frequency CHIRP, 3D Sonar) + 1kW High Power CHIRP Sonar Depth: High Frequency CHIRP = 900 feet | DownVision = 600 feet | SideVision = 300 feet Port and Starboard | 1kw = 5,000 feet Nominal Supply Voltage: 12 V and 24 V DC Operating Voltage: Range10.8 V to 31.2 V DC Power Consumption: 10.4 W (Maximum) Current: 2.4 A Peak; 1.2 A RMS Fuse/Breakers: 5amp Waterproof Rating: IPX6/IPX7 Operating Temperature: -25 C (-13 F) to +55 C (+131 F) Storage Temperature: -30 C (-22 F) to +70 C (+158 F) The RVX1000 is compatible with all LightHouse 3 enabled Multifunction Displays running software version 3.4 or higher. In the Box: RVX1000 Sonar Module (1) Power Cable, 1.5M (1) Fixing Screws, #8 (4) Documentation Pack (1) RayNet Network Cable, 2M (1)

MS-BB100 Marine Black Box AM/FM/BT - 2 Zone Introducing the MS-BB100, a compact black box entertainment solution that incorporates the marine industry supported Fusion-Link protocol and Fusion's proven marine engineering skillset to deliver a boat load of tunes.  An industry first, the BB100 includes an easy touch Bluetooth embedded IPx7 water resistant remote for quick audio adjustments.  Supplied with a 2m (6.6ft) connection cable, the wired remote is ideally shaped for hassle free installation onto a dash or boat console.  With the Bluetooth receiver embedded into the remote we can reduce the likelihood of interference occurring between your smartphone and the receiver.  Engineered for either a flush or flat mount installation, you can choose the finish to suit your vessel. NMEA 2000  Ready for connection and control from any supported Multi-Function Display - The MS-BB100 is a Fusion-Link Wired NMEA 2000 certified product and is compatible with a range of the world’s leading Multi-Function Displays for on-screen audio control. When pairing the MS-BB100 with a supported chartplotter or fish finder, you bring your music to the big screen, allowing you to keep an eye on the charts or the fish while skipping tracks or adjusting the volume at the same time. In addition to MFD control, the BB100 will connect to any Fusion NRX series remote control attached to the same powered NMEA 2000 network for localized control of the audio zones Fusion-Link™ makes control of your stereo easier than ever.  Quickly find your favorite song, tune in to the sports or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld or Garmin watch.  With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat. Multi-Zone Control With two independent audio zones available, each with advanced localized menu controls, including zone naming, you can easily customize and control your listening experience in each zone. Features: Small footprint Black Box design with included Bluetooth embedded wired remote IPx7 water resistant wired remote with quick Bluetooth pairing Flush or flat mounting remote control installation options Fusion-Link NMEA 2000 Ready for connection and control from any supported Multi-Function Display Multi-Zone™ Technology – Two independent audio zones are available, each with advanced localized menu controls, including zone naming True-Marine™ Designed and Engineered – Extensively tested to perform in the harsh marine environment Technical Specifications: 2 Zones 200 Watts peak power NMEA 2000 compatible  Class AB Amplifier Rear USB connection Dimensions (W/H/D) - 6-1/8" x 2-3/8" x 3-11/16"  Remote Dimensions (Diameter/Depth) - 2-9/16 x 3/16"  In the Box: Media Black Box Remote - Wired Remote Mounting Hardware/Gasket Remote Mounting Template 6' NMEA 2000 Drop Cable Power Wiring Harness Aux/Line-out Harness Documentation *SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ray90 Modular Dual-Station VHF Black Box Radio System Raymarine’s fixed mount Ray90 modular VHF radio brings multi-station communications to a whole new level of power, performance, and flexibility. The Ray90 is a black-box design with a transceiver that hides out of sight while the ergonomic RayMic handset and remote speaker provide full control of the radio with crystal clear audio. Features: Black box, multi-station capable VHF radio Wired handset and passive speaker included Expandable to 2 handsets Built-in loudhailer and fog signal generator Optional external GPS Simple NMEA2000 and NMEA0183 Networking Ray90 is equipped with a powerful 25-watt transmitter and commercial grade electronics for long life and superior performance. Channel scanning, dual-watch, tri-watch and weather alert are standard. Class D Digital Selective Calling radio and integrated GPS makes setting up the advanced safety and calling features easy. Simply input your vessel’s MMSI number during setup and you’re ready to go. For GPS operation the optional GA150 passive GPS antenna is required. Position Tracking Use Ray90’s position tracking feature to keep tabs on up to 5 nearby DSC equipped vessels. Their positions are automatically shared with your Raymarine MFD. Keep an eye on other boats in your cruising party, monitor vessels of interest, or manage your local fleet. In Europe the Ray90 supports the ATIS system on navigable inland waterways. Loudhailer Ray90’s built-in loudhailer will make you heard on-deck and across the harbour. Connect an optional hailing horn and make your presence known with 30-watts of audio output, plus 2-way talkback. When things get foggy, the loudhailer can also be set to automatically sound required fog signals for power and sailing vessels underway and at anchor. Waterproof & Ruggedized Ray90’s transceiver unit is cast in solid aluminum for shock and vibration resistance and maximum heat dissipation. RayMic handsets feature super-bright backlighting for easy viewing in all conditions and oversized keys provide a sure grip with easy access to commonly used functions. Expand Your System The Ray90 system includes 1 RayMic wired handset and a passive speaker kit. Expand your system with an additional RayMic handset and remote speaker. For noisy environments choose the optional active remote speaker. No matter how small or how large your vessel is, the Ray90 all the power and performance you need for essential communications on the water.