RAM-ROD® 2007 Fishing Rod Holder with Track Ball™ Base The RAM-ROD® 2007 rod holder is one of the most popular rod holders for the kayak angler due to its simplicity and adjustability. Utilizing the unique ball and socket technology, you can rotate and adjust the rod holder almost infinitely making this rod holder ideal for kayak fishing. This kit includes a Track Ball™ for connecting to virtually any track system including the RAM Tough-Track™.  Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in a poly bag

RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System (No Base) Unlike anything you've seen before, and performance beyond your expectations describes another great product for "Pros and Joes" alike. Integrating two sought after features into a single system makes this new Rod Holder versatile to the extreme. Offering not only the patented RAM Rubber Ball and Socket Feature, but a ratcheting feature as well, there is literally no limit to where this holder can be put or how it can be fished. With RAM, you're never limited by your mounting equipment. No matter whether you're on the water to lose stress, or gain tournament dollars, RAM Rod Holders only add to your success. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Tube Jr. Fishing Rod Holder Ideally suited for a wide range of applications and fishing vessels, this rod holder is quickly becoming known as the most versatile rod holder on the market. This configuration includes the RAM-ROD® Revolution ratchet arm with single open socket. Combining the patented RAM rubber ball and socket system with a ratcheting feature; this rod holder has almost infinite adjust ability and configuration options. Easily collapse the rod holder down on the deck for clearing your casting path or articulate over the water, and out of the boat or kayak. Rod holder doubles as a stake out pole holder. Features: 1. Quick release and installation 2. High strength materials ensure product longevity 3. Compatible with all RAM post spline bases 4. Compatible with spinning reels and level wind reels 5. Position spinning reel to the side or under RAM Tube Jr. 6. Compatible with left-handed and right-handed reels 7. Lifetime warranty 8. Made in the U.S.A. Material: High Strength Composite Weight: 1.0 lbs.

RAM ROD® Fishing Rod Holder with 6" Spline Post  The RAM ROD® Fishing Rod Holder with 6" Spline Post (RAM-114-NBU) is made of high-strength composite and has a 6" spline post, making it a must-have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. This fishing rod holder is compatible with a variety of spline post bases and is backed by a lifetime warranty.  Specifications: Product Dimensions: Post Length 6" Materials: High-strength composite Packaging Type: Poly Bag Weight: 0.77 lbs Components: RAP-114-P6U - RAM ROD® Long Spline Post with Knob

RAM ROD® Fishing Rod Holder with Dual T-Bolt Track Base This track mounting solution includes the high-strength composite RAM ROD® fishing rod holder, 6” spline post, and dual T-bolt track base. Compatible with the RAM® Tough-Track™ and designed to not loosen while trolling, this track base makes an excellent addition to the left side of a boat. Paired with the included spline post, easily rotate the RAM ROD® fishing rod holder 360 degrees while tilting the cradle forward and back to achieve the ideal angle. Features: Kit includes RAM ROD® fishing rod holder, 6" spline post, and dual T-bolt track base Compatible with all versions of the RAM® Tough-Track™ RAM ROD® fishing rod holder can be rotated 360 degrees and tilted to achieve the desired angle Backed by a lifetime warranty Specifications: Hardware Included: (2) 1/4"-20 x 7/8" T-Bolts; (2) 1/4"-20 Knobs Product Dimensions: 6 in. post length  T-Bolt Dimensions: 0.48 x 0.95 inches Hole Pattern: 3.5 inches Materials: High-strength composite Packaging Type: Retail bag Weight: 1.11 lbs.

RAM Tube Jr.™ Fishing Rod Holder with RAM-ROD® Revolution Ratchet/Socket System and Track Ball™ Base Ideally suited for a wide range of applications and fishing vessels, the Tube Jr.™ Fishing Rod Holder is quickly becoming known as the most versatile rod holder on the market. This configuration includes the RAM-ROD® Revolution Ratchet Arm and 1.5” Track Ball™. Combining the RAM® rubber ball and socket system with a ratcheting feature, this rod holder has almost unlimited adjustability and configuration options. Easily collapse the rod holder down on the deck for clearing your casting path or articulate over the water, and out of your boat or kayak. Compatible with virtually any track system including the RAM Tough-Track™. Features: Quick release and installation High strength materials ensure product longevity Compatible with all RAM post spline bases Compatible with spinning reels and level wind reels Position spinning reel to the side or under RAM Tube Jr. Compatible with left-handed and right-handed reels Lifetime warranty Made in the U.S.A. Material: High Strength Composite Note: Part number reflects product packaged in a poly bag

RAM-ROD 2007 Fly Rod Jr. Fishing Rod Holder with 5 Spot Mounting Base Adapter The RAP-341-5 consists of the RAM-ROD 2007 Fly Rod Jr. rod holder, single socket and 5 spot mounting base; this compatible with the RAP-114-5PU and RAP-114-5U. Offering the patented RAM rubber ball and socket system feature, you can rotate the rod holder 360 degrees and tilt it forward and back for the optimum angle. Ideally suited for spinning reels and bait casters, the RAM-ROD 2007 provides smooth action when inserting or removing your fishing rod, yet holds firm in rough water while trolling. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

Adjustable All-Angle Fish Rod Holder Mounted Kayak/SUP Rack No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water.   With Magma’s Fish Rod Holder Mounted Removable Kayak / SUP Rack your problems are solved.  This convenient storage rack, easily attaches to most standard fish rod holders, has been constructed from 1” Dia., 304 marine grade Stainless Steel tubing, aircraft quality hard anodized 356 aluminum, and includes stainless steel attachment fasteners.  Designed to fit most standard fish rod holders up to 1-1/2” (38mm) inside diameter and is wide enough to fit all of the most popular kayak or board sizes.  Magma’s patented LeveLock® all-angle adjustable mounting bracket and the Pow’rGrip adjustable quick release rod holder system allows each arm to be instantly installed and adjusted without tools.  Each arm comes with pre-installed UV resistant padding and has two tie-down attachment points for securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.   Whether you’re new to water sports or a seasoned veteran, this rack is a must have for the paddling enthusiast who’s always on the go. Features: Holds a single kayak or 2 or more standard SUP’s Allows quick installation or removal without tools for convenient storage Technical Specifications: Material - 304 Marine grade Stainless Steel Bracket Height (w/o mount) - 26.84" (68.18 cm) Weight (Pair) - 12.4 lbs (5.63 kg) *Sold as a Pair

RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base The RAM-114-RBU consists of the RAM-ROD 2000 fishing rod holder, ratchet arm with single open socket and 2.5" diameter round base that contains the universal AMPS hole pattern. Offering the patented RAM rubber ball, socket and ratcheting feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base The RAM-117U consists of the RAM-ROD 2000 fishing rod holder, double socket arm and 2.5" diameter round base that contains the universal AMPS hole pattern. Offering the patented RAM rubber ball, socket and ratcheting feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM-TUBE™ 2008 Fishing Rod Holder with Track Ball™ Base The RAP-119-TRA1U consists of the RAM-TUBE™ 2008 fishing rod holder and Track Ball™ for any track system including the RAM Tough-Track™. Offering the patented RAM rubber ball and socket feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. The RAM-TUBE™ 2008 tube holder integrates the unique rubber ball and socket design with a self draining and quick to access tube for the butt of most any fishing rod. The tube is made of extremely durable composite. Ideally suited for anything from Kayaks to Tournament boats, this compact and simple design is ready for your next day on the water. Tube Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in a poly bag

RAM-ROD 2000 Fishing Rod Holder with 1.5" Ball The RAM-117BU consists of the RAM-ROD 2000 fishing rod holder and patented 1.5" diameter rubber ball. With the combination of the patented RAM rubber ball and socket system you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM-ROD® 2000 Fishing Rod Holder with RAM-ROD® Revolution Ratchet/Socket System and Track Ball™Base The RAM-114-RB-TRA1U consists of the RAM-ROD® 2000 fishing rod holder, ratchet arm with single open socket and 1.5" Track Ball™ base for any track system including the RAM Tough-Track™. The unique ball and socket with ratcheting feature allows for 360-degree rotation of the rod holder for optimal angle adjustments while on the water.  Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag

RAM ROD® Fishing Rod Holder with Plunger Bulkhead Base The RAM-114-BMP consists of the RAM ROD® Fishing rod holder with a 6" long spline post and a bulkhead base that is suitable for horizontal or vertical surfaces. Specifications: Product Dimensions: 6 in. post length  Hole Pattern: 1.3 x 3.19 inches Materials: High-strength composite Packaging Type: Retail header card Weight: 1.2 lbs.

RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post, Combination Bulkhead/Flat Surface Base & Plunger The RAP-394-SSBMPU consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline post arm and combination/bulkhead/flat surface mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Features: Quick release and installation High strength materials ensure product longevity Compatible with all RAM & 3rd party post spline bases Compatible with spinning reels and level wind reels Ratchet system allows for multiple articulation points Lanyard tie points for extra security Custom designed for heavy chop environments Mount virtually anywhere on heavy rigged kayaks without hinderance Lifetime warranty Made in U.S.A. Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Post Spline Length: 3" Material: High Strength Composite Notes: The "U" in the part number reflects product packaged in poly bag.