Gasket & Seal Set for Helm Pumps MT30-MT140 Full service kit for VETUS Helm Pumps MT40 to MT140 (including the more recent MTP42, MTP53) Consists of shaft seal (HS801 25 x 42 x 7mm) and back plate gasket (HS804).

ENGINE PARTS From Sierra, Arco Marine, and CDI Electronics.  We can no longer ship engine parts internationally or, to California due to Prop 65.

Sierra Marine Engine Parts & Drive Parts   Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.   If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.   Warning: We can no longer ship engine parts International or to California Due to Prop 65.

WP015 Water Pump Repair Kit for Suzuki Outboard Engines This water pump repair kit is designed for specific Suzuki outboard engines. Fits: Suzuki 4 Stroke Outboard 20HP, 25HP, 30HP, 35HP, 40HP, and 50HP boat motor engine parts model DT20, DT25, DT25C, DT30, DT30C, DT35, DT40C, DF25, DF30, DF40, and DF50 2 Replaces: Suzuki Water Pump Repair Kit 17400-96404 Suzuki Water Pump Repair Kit 17400-96403 Suzuki Water Pump Repair Kit 17400-96402 Suzuki Water Pump Repair Kit 17400-96401 Suzuki Water Pump Repair Kit 17400-96400 Suzuki Water Pump Repair Kit 17400-96354 Suzuki Water Pump Repair Kit 17400-96353 Suzuki Water Pump Repair Kit 17400-96352 Suzuki Water Pump Repair Kit 17400-96351 Suzuki Water Pump Repair Kit 17400-96350 Johnson/Evinrude OMC Water Pump Repair Kit 0778317 Johnson/Evinrude OMC Water Pump Repair Kit 5031415 Johnson/Evinrude OMC Water Pump Repair Kit 5032166 Johnson/Evinrude OMC Water Pump Repair Kit 5034358 Johnson/Evinrude OMC Water Pump Repair Kit 5031744 Warranty Information When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

EngineBox - Double Engine The EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA 2000® and a J1939 CAN port. The EngineBox can also be used on older, completely analog engines, thanks to the analog input ports provided and designed for RPM data, resistive sensors and capacitive sensors.  The EngineBox has to be set up using an intuitive PC configuration tool making it easy for programming the inputs (delivered free of charge). Thanks to the ISO 8846:1990 compliance, the EngineBox is also designed to be installed in engine compartments. The Veratron Diagnostic Tool USB to NMEA 2000 (A2C3931270001) and Veratron Configuration Software tool are needed to configure this Engine Box. Features: Analog to NMEA 2000® gateway  J1939 to NMEA 2000® gateway  2 Models for single engine and dual engine configurations  Compact design  Status LED  Operating temperature range -40°C/+85°C Technical Specifications:  1x J1939 (2x J1939 Dual Engine)  1x M12 5 pins NMEA 2000®  1x Input 0–4 kHz for RPM (2 inputs with Dual Engine Model)  4x Inputs 0–400 Ohm (up to 8 inputs with Dual Engine Model)  2x Inputs 4–20 mA  1x Input 0–5 V (2 inputs with Dual Engine Model) In the Box: Engine Cable Cable Harness Safety Instructions *Sold as an Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

EngineBox - Single Engine The EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA 2000® and a J1939 CAN port. The EngineBox can also be used on older, completely analog engines, thanks to the analog input ports provided and designed for RPM data, resistive sensors and capacitive sensors.  The EngineBox has to be set up using an intuitive PC configuration tool making it easy for programming the inputs (delivered free of charge). Thanks to the ISO 8846:1990 compliance, the EngineBox is also designed to be installed in engine compartments. The Veratron Diagnostic Tool USB to NMEA 2000 (A2C3931270001) and Veratron Configuration Software tool are needed to configure this Engine Box. Features: Analog to NMEA 2000® gateway  J1939 to NMEA 2000® gateway  2 Models for single engine and dual engine configurations  Compact design  Status LED  Operating temperature range -40°C/+85°C Technical Specifications:  1x J1939 (2x J1939 Dual Engine)  1x M12 5 pins NMEA 2000®  1x Input 0–4 kHz for RPM (2 inputs with Dual Engine Model)  4x Inputs 0–400 Ohm (up to 8 inputs with Dual Engine Model)  2x Inputs 4–20 mA  1x Input 0–5 V (2 inputs with Dual Engine Model) In the Box: Engine Cable Cable Harness Safety Instructions *Sold as an Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Ampco GX5039902 Casing Gasket KC2 1 1/2 X 1 Ampco Pump Repair Part GX5039902 Gasket Casing/Cover. Designed for 1-1/4 X 1 (Nickle Aluminum Bronze/Stainless Steel), 1-1/2 X 1 (Nickle Aluminum Bronze/Stainless Steel) pump models.  

Groco 9R Set Gasket Set Of 2  

Jabsco 1126-0000, End Cover Gasket Gasket fits many Jabsco pumps

Jabsco 3101-000, End Cover Gasket Gasket fits many Jabsco pumps

Jabsco 816-0000, End Cover Gasket Gasket fits many Jabsco pumps

STA-RITE J20-11 GASKET Gasket for use with Series MS Models MSC­7, MSD­7, MSE­7, MSF­7, MSG­7 With hoursepowers of 1/2, 3/4, 1, 1-1/2, 2 HP

OBERDORFER 10631 PLUS GASKET KIT FOR N992 & N992R

MP Pumps 21126 GASKET GASKET:3 17/64 X .03 NI-2085

MP Pumps 21248 Gasket Gasket Size 1/2 x 5/16 x 1/16