|
>
Now On Sale! Select Electrical Products from Ancor & Marinco
Don't miss out on super savings now until July 31st, 2015 Select Ancor and Marinco products are on sale the entire month of July.
Don't miss out on these super savings!
Solid Products You Can Rely On From Ancor Don't miss out on super savings now until July 31st, 2015
Ancor Marine Grade™ Products quickly became the system of choice as the first major supplier of UL listed products designed for the harsh marine environment. Often imitated, never duplicated, Ancor continues to lead the industry by providing the most water resistant, flame retardant wiring products available.
Marinco Products Designed to Withstand the Rigors of Life at Sea Don't miss out on super savings now until July 31st, 2015
Marinco makes electrical products that stand up to the harshest environments. Every product made, from the rugged shore power cordsets and adapters to a wide array of 12V accessories, is designed to withstand the rigors of life at sea.
|
|
|
Wire Connectors and Wire Terminals
|
|
|
Blue Sea Systems Products on Water or Land
In addition to the marine industry, Blue Sea Systems products can be found on emergency vehicles, RVs, agricultural equipment, off-road vehicles, and other industries where rugged, dependable products are required.
7650 Add-A-Battery
Add-a-Battery simplifies switching and automates charging for a complete two battery bank management solution. The Dual Circuit Plus™ Battery Switch isolates engine and house circuits and combines battery banks for emergency starting.
WeatherDeck 4376 Water Resistant Circuit Breaker Panel
The 4376 WeatherDeck is a water resistant circuit breaker panel with 6 positions. It is rated IP67 for temporary immersion for 30 minutes. The 4376 is designed for flybridge and open cockpit applications.
5025 ST Blade Fuse Block with Cover
The 5025 ST Blade Fuse Block with a clear, insulating cover has 6 circuits and a negative bus. The 5025 can be used for 24-circuits and has a positive distribution bus with a #10-32 stud. Models are available with or without a cover.
7748 SafetyHub 150 Fuse Block
The SafetyHub 150 is an ignition protected fuse block with screw termination. It is safe for use on gasoline powered boats, reduces wiring connections, and consolidates up to ten fused circuits. It can be used for Main or Branch DC power distribution.
|
|
|
VR04 V10 Heavy Duty Set Screw Terminals - 1/0AWG - 2 Pack
You'll get tight and secure connections for your amplifier's power and ground cables with a set of T-Spec's set screw ring terminals. You just insert the wire's stripped end and tighten the Torx T-20 set screw for a long-lasting and worry-free electrical connection.
Features:
One (1) Red and one (1) Blue marked terminal - 1/0 AWG
5/16" hole
Nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
Two (2) 1/0 AWG wire terminals w/ set screws
2 Rubber insulators
*Sold as 2 Pack
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.16 |
|
|
VR48 V10 Heavy Duty Set Screw Terminals - 4 AWG - 2 Pack
You'll get tight and secure connections for your amplifier's power and ground cables with a set of T-Spec's set screw ring terminals. You just insert the wire's stripped end and tighten the Torx T-20 set screw for a long-lasting and worry-free electrical connection.
Features:
One (1) Red and one (1) Blue marked terminal - 4 AWG
5/16" hole
Nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
Two (2) 4 AWG wire terminals w/ set screws
2 Rubber insulators
*Sold as 2 Pack
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.53 |
|
|
22-18 AWG - #10 Nylon Ring Terminal - 100-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.38 |
|
|
16-14 AWG - #8 Nylon Ring Terminal - 100-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.38 |
|
|
8 AWG - #10 Nylon Ring Terminal - 25-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.08 |
|
|
8 AWG - 1/4" Nylon Ring Terminal - 25-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.16 |
|
|
8 AWG - 1/4" Nylon Ring Terminal - 100-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
33.06 |
|
|
16-14 AWG Heat Shrink Ring Terminal - #10 Stud Size - 3 Pack
Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.
Features:
Tinned copper
600 Volts
Operating temperature is -55°C to 125°C
Highly compliant
Benefits & Protections:
Solid connections
Extremely durable
Long-lasting
Tin-plated
Easy to install
Specifications:
Color: Blue
Wire AWG: 16-14 AWG
Stud Size: #10
Terminal Pad Width (inch): 0.32”
Package Size: Three included
|
2.40 |
|
|
16-14 AWG Heat Shrink Ring Terminal - 3/8" Stud Size - 25 Pack
Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.
Features:
Tinned copper
600 Volts
The operating temperature is -55°C to 125°C
Highly compliant
Benefits & Protections:
Solid connections
Extremely durable
Long-lasting
Tin-plated
Easy to install
Specifications:
Color: Blue
Wire AWG: 16-14 AWG
Stud Size (inch): 3/8"
Terminal Pad Width (inch): 0.55”
Package Size: Twenty-five included
|
17.14 |
|
|
8 AWG Heat Shrink Ring Terminal - 3/8" Stud Size - 3 Pack
Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.
Features:
Tinned copper
600 Volts
The operating temperature is -55°C to 125°C
Highly compliant
Benefits & Protections:
Solid connections
Extremely durable
Long-lasting
Tin-plated
Easy to install
Specifications:
Color: Pink
Wire AWG: 8 AWG
Stud Size (inch): 3/8"
Terminal Pad Width (inch): 0.82”
Package Size: Three included
|
3.44 |
|
|
Tinned Lug 1/0 AWG - 1/2" Stud Size - 10 Pack
Lugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.
Features:
Tin-plated copper with no exposed seams offering 100% long-term conductivity
Tinned copper
Highly durable
Multitude of sizes
Easily terminated
In-field applications
Long-lasting
Compliances:
E.T.P. (Electrolytic Tough Pitch) CDA-110
ASTM-B-152 Copper
RoHS Compliant
CSA Approved
UL Approved
Specifications:
Wire AWG: 1/0 AWG
Stud Size: 1/2"
Length (inch): 1.844"
Width (inch): 0.734"
Clearance (inch): 0.469"
Package Size: Ten included
|
21.67 |
|
|
Depthpower Electric Plug & Socket
Features
12 volt downrigger plug and receptacle
Patented Marinco ConnectPro Plug and Receptacle have weather resistant connections
Corrosion-resistant, plated brass electrical components. Marinco's exclusive Perma-Lock terminals, which virtually never need retightening
Unique locking blades and spring clamping connection for secure electrical contact. Large contact surface area for maximum conductivity
Does NOT come with the angle bracket
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
41.26 |
|