|
|
|
|
ST Blade Compact Fuse Blocks - 4 Circuits w/Cover
Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space.
Compact common source fuse block
Accepts ATO® and ATC® fast acting blade fuses
Single side entry wiring
Ignition Protected-meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment
Insulating cover meets ABYC/USCG insulation requirements
Tin-plated copper buses and fuse clips
Accepts ring or snap fork type terminals
Small format standard and custom labels available
Specifications
Circuits:4
Maximum Amperage: 100A per block / 30A per circuit
Maximum Voltage:32V DC
Mounting: #8 Screw (M4)
Screw Terminal Torque:#8-32 Screws with captive star lock washer in-lb (0 Nm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.13 |
|
|
ST Blade Compact Fuse Blocks - 8 Circuits w/Cover
Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space.
Compact common source fuse block
Accepts ATO® and ATC® fast acting blade fuses
Single side entry wiring
Ignition Protected-meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment
Insulating cover meets ABYC/USCG insulation requirements
Tin-plated copper buses and fuse clips
Accepts ring or snap fork type terminals
Small format standard and custom labels available
Specifications
Circuits:8
Maximum Amperage: 100A per block / 30A per circuit
Maximum Voltage:32V DC
Mounting: #8 Screw (M4)
Screw Terminal Torque:#8-32 Screws with captive star lock washer in-lb (0 Nm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
40.00 |
|
|
ST Blade Fuse Block With Cover - 6 Circuit without Negative Bus
Part# 5035
Can be used for 24-hour circuits
Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems' Small Format Labels for circuit identification
Fuse blocks with covers include 20 write-on circuit labels
Tin-plated copper buses and fuse clips
Accepts ring or spade type terminals
Accepts ATO® and ATC® fast acting blade fuses
Fuses sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.36 |
|
|
5056100 - Water Resistant ST-Blade Fuse Block with Cover
This Blue Sea fuse block provides water-resistant circuit protection for ATO/ATC fuses and circuit breakers in a compact footprint. Now with wing screws for toolless access.
Features:
Water-resistant design with a standard ring or spade-type terminals
Allows for simple wiring with standard tools
Accepts a wide range of wire sizes
Includes 3 wire plugs to maintain a water-resistant rating if less than 4 loads are required
Accepts ATO and ATC fast acting blade fuses
Accepts ATO/ATC-Style Low Profile Circuit Breakers
Nests with other ST-Blade water-resistant fuse blocks and water-resistant 100A busbars to reduce wire
5056100 meets ABYC/USCG insulation requirements
Tin-plated copper busses and fuse clips
Includes four write-on circuit labels
Spare fuse and fastener storage in cover
Wing screws designed for tool-free installation of cover to meet ABYC compliance
Technical Specifications:
Cover - yes
Maximum Voltage - 32V DC
Bus Material - Tin-plated Copper
Mounting Holes - Accepts 1/4" (6mm) screws
Terminal Screws - 4 x # 8-32 with captive star lock washer
Wire Size - Input - (1) 8 AWG to 4 AWG
Wire Size - Load - (4) 16 AWG to 10 AWG
In the Box:
5056100 Busbar
Instruction Manual
*Sold as an Individual
|
35.99 |
|
|
5056 ST-Blade Water Resistant Fuse Block with Cover
Provides water-resistant circuit protection for ATO/ATC fuses & circuit breakers in a compact footprint. The single side nesting design allows for wire entry from one side to maximize space.
Features:
Water-resistant design with standard ring or fork type terminals allows for simple wiring with standard tools
Accepts a wide range of wire sizes
Includes 3 wire plugs to maintain water resistant rating if less than 4 loads are required
Accepts ATO and ATC fast-acting blade fuses
Accepts ATO/ATC-Style Low Profile Circuit Breakers
Nests with other ST-Blade Water-Resistant Fuse Blocks and Water-Resistant 100A Bus Bars to reduce wire
Insulating cover meets ABYC/USCG insulation requirements
Tin-plated copper busses and fuse clips
Includes four write-on circuit labels
Small format standard and custom labels available
Spare fuse and fastener storage in cover
Specifications:
Amperage: 80A per block/25A per circuit
Maximum Voltage: 32V DC
Bus Material: Tin-Plated Copper C11000
Mounting Holes: Clearance for 1/4" (6mm) screws
Screw Terminal Type: #8-32 Screws with captive star lock washer
Wire Size: (1) 8 AWG to 4 AWG - Input/(5) 16 AWG to 10 AWG - Load
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
33.60 |
|
|
ST Blade Fuse Block w/o Cover - 6 Circuit w/o Negative Bus
Part# 5037
Can be used for 24-hour circuits
Fuse blocks with covers include 20 write-on circuit labels
Tin-plated copper buses and fuse clips
Accepts ring or spade type terminals
Accepts ATO® and ATC® fast acting blade fuses
Fuses sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.91 |
|
|
MRBF Surface Mount 3 Circuit Fuse Block - Common Source
Surface mount fuse blocks accommodate three MRBF fuses for consolidated high amperage circuit protection
The independent source fuse block (5194) is ideal for 3 output battery chargers
The common source fuse block (5196) provides 3 loads from a single source
Clip-on cover insulates terminal connections
Versatile wiring options allow all wires to come out a single side
Label recesses for easy circuit identification
One-piece stainless flange nuts ensure safe and secure connections
Specifications
Ignition Protected: Yes
Maximum Amperage: 300a per block/240a per circuit
Maximum Voltage: 58v DC
Maximum Torque: 100 in-lb
Terminal Stud Size: M8 (5/16"-18)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.34 |
|
|
Surface Mount 3 Circuit Fuse Block - Independent Source
Surface mount fuse blocks accommodate three MRBF fuses for consolidated high amperage circuit protection
The independent source fuse block (5194) is ideal for 3 output battery chargers
The common source fuse block (5196) provides 3 loads from a single source
Clip-on cover insulates terminal connections
Versatile wiring options allow all wires to come out a single side
Label recesses for easy circuit identification
One-piece stainless flange nuts ensure safe and secure connections
Specifications
Ignition Protected: Yes
Maximum Amperage: 240 per circuit
Maximum Voltage: 58v DC
Maximum Torque: 100 in-lb
Terminal Stud Size: M8 (5/16"-18)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
54.74 |
|
|
Class T Fuse Block with Insulating Cover - 225 to 400A
Allows the use of Class T fuses for fast acting circuit protection of inverters and other electronics
Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse
Insulating cover satisfies ABYC/USCG insulation requirements
Cover breakouts allow wire access in any direction
Stud design ensures secure fuse mounting even with high heat
Stainless steel studs provide resistance to corrosion and high torque
One-piece stainless flange nuts ensure safe and secure connections
UL 94-V0 base resists high heat
Technical Specifications:
Cable Size: Up to 4/0 AWG
Ignition Protected: Yes
Maximum Amperage: 320A
Maximum Voltage: 160V DC
Fuse Mounting Blocks: Tin-Plated Copper
Terminal Stud Size: 5/16"-18 (M8)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
68.44 |
|
|
Fuse Block Class T 225-400 AMP
Part #: 5502
Features:
Maximum Voltage: 160 Volts DC
Maximum Amperage: 400 Amperes DC
Maximum Torque: 190 in-lb (21.47 Nm) max.
Terminal Stud Size: 3/8"-16 (M10)
Mounting Holes: Accept 1/4" (M6) Screw
Maximum Cable Size 4/0 AWG
Fuse Mounting Blocks: Tin-Plated Copper
Class T Fuses Available: 110-400 Amperes DC
Fuse Sold Sepereatly
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
47.47 |
|
|
ST-Blade Split Bus Fuse Block
Features:
Provides two isolated groups of six ATO/ATC circuits
For use with either two isolated batteries or with a single battery providing a mix of 24 hour and switched circuits
Screw terminals for securing wires accept ring terminals
One-piece stainless flange nuts ensure safe and secure connections
Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements
Easy to open, push button latch for easy access to fuses
Tin-plated copper buses and fuse clips
Fuses sold separately
Specifications:
Circuits: 12
Maximum Amperage: 100A per block, 30A per circuit
Maximum Voltage: 32V DC
Mounting: #8 Screw (M4)
Negative Bus: #10-32 Stud
Screw Terminal Type: #8-32 Screws with captive star lock washer
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
62.74 |
|
|
Standard 4 ATO Fuse Block with LED Indicators
The SD 4 ATO Fuse Block provides a cost-effective, consolidated circuit protection solution. These products are designed to accept standard ATO fuses and ensure safe power distribution throughout an application. Integrated LED blown fuse indicators allow for quick maintenance, preventing troubleshooting & equipment downtime. These products are RoHS compliant.
Features:
Carded blister packaging for simple retail display
LED blown fuse indicators
Snap-on insulating cover (included)
Centralizes wiring to a convenient location
The insulating cover provides circuitry protection
Continuous current rating of 100A
Current rating max per circuit: 30A Max
Applications:
Centralized distribution for accessory circuits
Ideal solution for DIY projects
*Fuses not included
|
17.45 |
|
|
Standard 6 ATO Fuse Block with LED Indicators
The SD 6 ATO Fuse Block provides a cost-effective, consolidated circuit protection solution. These products are designed to accept standard ATO fuses and ensure safe power distribution throughout an application. Integrated LED blown fuse indicators allow for quick maintenance, preventing troubleshooting & equipment downtime. These products are RoHS compliant.
Features:
Carded blister packaging for simple retail display
LED blown fuse indicators
Snap-on insulating cover (included)
Centralizes wiring to a convenient location
The insulating cover provides circuitry protection
Continuous current rating of 100A
Current rating max per circuit: 30A Max
Applications:
Centralized distribution for accessory circuits
Ideal solution for DIY projects
*Fuses not included
|
22.91 |
|
|
Standard 10 ATO Fuse Block with LED Indicators
The SD 10 ATO Fuse Block provides a cost-effective, consolidated circuit protection solution. These products are designed to accept standard ATO fuses and ensure safe power distribution throughout an application. Integrated LED blown fuse indicators allow for quick maintenance, preventing troubleshooting & equipment downtime. These products are RoHS compliant.
Features:
Carded blister packaging for simple retail display
LED blown fuse indicators
Snap-on insulating cover (included)
Centralizes wiring to a convenient location
The insulating cover provides circuitry protection
Continuous current rating of 100A
Current rating max per circuit: 30A Max
Applications:
Centralized distribution for accessory circuits
Ideal solution for DIY projects
*Fuses not included
|
28.45 |
|