|
Antenna Mounts and Accessories
Use our Shipping Cost and Time Estimator on the Shopping Cart page. You need to put the item in the cart to get an estimate. We ship Monday-Friday (excluding Holidays and some weather days) and almost always ship same day when order is placed before 2:00 PM Eastern Time if in stock.
|
|
|
Grand Slam 800 VHF Antenna Mount
The GS-800 VHF Antenna Mount was created specifically to prevent climbing on the boat gunnel to raise and lower a VHF antenna. Lift and descend the antenna from the safety of the deck from under the top. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater.
Features:
Safe, no-hassle raising and lowering of a VHF antenna
No more climbing on T-tops or gunnels
Machined / Anodized aluminum body
Light brushed finish
Polished Type-316L stainless steel crank handle
Folding crank handle locks flush into base
Threaded shaft for consistent lift and descent
Delrin bearings for smooth operation
Roller bearings in crank assembly
Mounts through up to 2" thick hardtops
Includes 4" x 1/4" round backing plate (hardware not included)
Made in the USA
1-year limited warranty
|
779.99 |
|
|
The RAM antenna mount is designed to hold most VHF and similar antennas. The rubber ball and socket system securely mounts the antenna while allowing for almost infinite adjustment. Mount the antenna on a horizontal or vertical surface or anywhere in between. The ball base is made from a light weight marine grade aluminum with powder coat. The ball socket and male 1" -14 threaded post are made from high strength composites designed for prolonged outdoor use. The RAM antenna mount will work with any standard antenna that has a 1" -14 threaded interface.
Color: Black Powder Coat
Ball Size: 1.5 Inch Rubber Ball
Material: Marine Grade Aluminum and Composites
|
26.29 |
|
|
GPS / VHF Antenna Mount for Self Levelling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar.
Features
Attaches to top of radome cradle
Fits all standard GPS / VHF antennas with 1? x 14 tpi thread attachment
Materials
Marine grade 316 stainless steel
GPS / VHF Antenna Mount Kit
1 x GPS / VHF mount
2 x M6 x 8mm bolts
2 x M6 spring washers
|
93.83 |
|
|
Heavy-Duty Ratchet Antenna Mount - 316 Stainless Steel
Features:
316 stainless steel construction
Lay-down handle quickly loosens the ratchet for a fast, easy antenna drop
Features standard 1”-14 male thread mount with a hole for a Loran cable
The lightweight mount may be used self-supporting with an antenna up to 15’ long
Both mounts feature two ratchets for both up/down and side-to-side adjustments
Flat base for deck mounting
Base dimensions: 3½” x 2½”
|
78.41 |
|
|
Grand Slam 850 Electric VHF Antenna Mount
Designed with safety and innovation in mind, boaters can adjust the position of their VHF antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses.
Features:
Standard 1”-14 thread (male) shaft to accept standard VHF antennas
No under-mount clearance required
Machined / Anodized aluminum body with a light brushed finish
Threaded shaft for consistent lift and descent
Delrin bearings for smooth operation
Features removable set screw for manual adjustment
Kit includes drill template and installation instructions
Includes 10” lead for 12-volt DC power supply for lift and descent
Accepts 3A fuse in the main +12 VDC power feed (not included)
Sold individually
Made in the USA
1-year limited warranty
|
899.99 |
|
|
WindTrak AV Antenna Mount Wind Vane
WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system.
WindTrak AV installs onto most whip antennas, including Metz and Shakespeare brands, with a whip diameter less than 1/8" (3 mm). Combine two installations into one to reduce masthead clutter, weight, and windage aloft. Rides on low-friction Teflon® bearings. Complete with 15" (38 cm) vane, reflective tacking arms, hardware and instructions for easy installation. Antenna not included.
|
37.50 |
|
|
Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base
The Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.
The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, marine or vehicle mounting necessitates additional support. Opting for the Seaview SRM200W Mount is a superior choice, offering a reliable and adaptable mounting solution. You have the option to utilize through-bolts for a permanent fixture through machined holes in the mount's base or pair it with the Seaview 8° Wedge base for a highly versatile installation.
*The SRM200W can be mounted directly or it can be mounted to the Starlink 8° Wedge Base (SVSLWB).
Wedge Base Features:
Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.
Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base.
No need to cut the Starlink connectors for installation.
Available in white or black
|
686.40 |
|
|
Gen 3 Standard Starlink Antenna Mount
The Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.
The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, marine or vehicle mounting necessitates additional support. Opting for the Seaview SRM200W Mount is a superior choice, offering a reliable and adaptable mounting solution. You have the option to utilize through-bolts for a permanent fixture through machined holes in the mount's base or pair it with the Seaview 8° Wedge base for a highly versatile installation.
*The SRM200W can be mounted directly or it can be mounted to the Starlink 8° Wedge Base (SVSLWB).
|
432.00 |
|
|
Shakespeare Style 4720 Economy Rail Antenna Mount
Shakespeare's Style 4720 Economy Rail Mount is designed for quick and easy installation on vertical or horizontal, straight or angled rails. Its simple design makes installation a snap. The vice section grips the rail, and the flat section supports the antenna. The flat section can also be bolted to a flat surface, instead of to the rail grip.
Standard 1" - 14 thread
Nylon adapters included for 7/8", 1", and 1-1/4" vertical or horizontal rails
Stainless steel construction
|
23.68 |
|
|
Standard Support w/4-Way Base - 1.5" Collar
A perfect blend of form and function, Antenna Mounting Systems by Rupp combine good looks with innovative designs. The locking collar holds antenna securely, yet unlocks conveniently for lowering. Made of forged and anodized aluminum for strength and long lasting beauty. Standard supports are designed for easy mounting to cabin sides.
Features:
Base: Oval 4-Way
Spacer: No
Bolts: No
|
169.76 |
|
|
Standard Support w/4-Way Base w/Spacer & 1.5" Collar
A perfect blend of form and function, Antenna Mounting Systems by Rupp combine good looks with innovative designs. The locking collar holds antenna securely, yet unlocks conveniently for lowering. Made of forged and anodized aluminum for strength and long lasting beauty. Standard supports are designed for easy mounting to cabin sides.
Features:
Base: Oval 4-Way
Spacer: 4.5"
Bolts: 2-6"
|
206.47 |
|
|
Ratchet Antenna Mount - 316 Stainless Steel
Features:
Stainless steel construction
May be used self-supporting with an antenna up to 15'
Standard 1" - 14 male threads, includes cable hole
Requires 1/4" (4) fasteners
Mounting Hole Spacing: 2-13/16" (length) , 1-3/4" (width)
|
62.64 |
|
|
Marine Communication Equipment and Components
If you need new communication equipment for your boat, you have come to the right place. With a wide selection of communication supplies and marine communication equipment, we can help you find what you need and get back out on the water enjoying yourself. The right marine communication supplies and accessories are important, and we carry top brands such as Shakespeare, Standard Horizon, ICOM, Speco-Tech, ACR Marine, Raymarine, Furuno, and Cobra Electronics. Price ranges and options vary, so you can select the choice that fits your needs and budget.
Whether you need antenna mounts & accessories, a digital antenna, or related parts, we have the antennas and accessories for them that you are looking for. We also offer a number of CB radios, cellular amplifiers, loud hailers, hailer horns, and mobile broadband options, so you can stay connected in a number of ways. Having different options to reach out to people can bring peace of mind in a serious situation, and can also just help you have more fun while you are out enjoying the waterways. With single side band, VHF - fixed mount, and VHF - handheld options, along with satellite telephone brands to choose from, we give you what you need in order to stay connected.
|
|
|
SXV300 Connect Tuner & Marine/RV Antenna
Connect, control and enjoy all the wonders of satellite radio on the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look.
Features:
Flexible Installation: Surface, Low Profile with Base, and Pedestal Mounts.
Compatible with third-party 1"-14 threaded masts, and rail mounts (sold separately).
Antenna with 6" pigtail and 25' antenna cable to allow for optimal placement.
Best antenna solution for both metallic and non-metallic mounting applications, such as boats or RVs.
Technical Specifications:
Dimensions - 3.42" (W) x 2" (H) x 0.7" (D)
Power Requirements - 12v DC, 0.3 A (MAX) supplied by boat or RV
Operating Temperature - -4°F to +158°F /-20°C to +70°C
IPX67 rated
In the Box:
SXV300 Connect Tuner
Marine/RV Antenna
25' Antenna Cable
Three Mounting Accessories: Surface, Low Profile with Base, and Pedestal Mounts
NOTE: The SXV300 Connect Tuner is not marinized. It should be mounted in a clean, dry location.
|
84.52 |
|