As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

22.5" Dual Mount for Up To 4.5' Open Array Radar - Top for Sat Domes - Top Plate Required  Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management. Compact Design Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Eliminate Interference A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation. Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount. Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately*

DRS12ANXT/3 Radar Pedestal 3' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DRS12ANXT/4 Radar Pedestal 4' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DRS12ANXT/6 Radar Pedestal 4' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DRS25ANXT/3 Radar Pedestal 3' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DRS25ANXT/4 Radar Pedestal 4' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DRS25ANXT/6 Radar Pedestal 6' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SC103 Radar Pole Mount - 6' Totally universal, the Scanstrut SC103 Pole Mount installs your radar onto the deck or transom of your boat. Supplied as a complete kit, you will have everything you need for a quick and easy installation.  The anodized aluminium base gives choice when deciding where you wish to install the pole mount, it has a rotation of 360 degree that enables the pole to be installed on both sloping transoms and level decks.  The Pole features two cable channels with a cover strip to hold cables in place and out of view.  Made from marine-grade aluminium and coated with a 4-step marine paint system, making sure that your pole mount stays looking its best year in, year out, whatever the oceans throw at it. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS2D, DRS42DL, DRS42DL+, DRS4D / DRS4D-NXT, DRS4W, NavNet (18"), NavNet (24"), SC33 Sat Compass radars Glomex - Pandora v8001, RHEA V8100, Urania V9331, V9000 and V9001 series radars Humminbird - AS 21RD4KW radar Intellian - FB150 in i2, FB250 in i2, FB250R in i2, i1 radars Interphase - Mini RE-1, RE-8, RE-9 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000,  JMA 2343 / 5104 [Radome: NKE-2042] radars Koden - 2kW 12", 4kW [RB715A] radar KVH - TracVision M1, TracVision TV1 radar Lorenz - Lorenz 2kW Lowrance - LRA-1800 / RB714A / DX42, LRA-2400 HD radars Majestic - SATMAR32, SATMAR32D, SATMAR37D Navman - 8000 Series [8084/8120] 18", 8000 Series [8084/8120] 24" radars Nobeltec - 2kW (20"), 4kW [IR2-4D 25" 4Kw] radars Northstar - M series/8000i (18"), M series/8000i (24") radars Raymarine -  33STV radar Seiwa - SWR-1, SWR-8, SWR-9 radars Simrad - GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS -1, MDS -8, MDS -9, MDS-12, NKE-1066 radars Techmarine - T-72.01, T-72.02, T-72.04 radars Features: Adjustable base, able to rotate 360°.  Base enables the pole to be installed on both sloping transoms and level decks.   Unique pole extrusion accommodates two (2)  cable channels with a cover strip to hold cables in place Supplied with two support modules providing maximum fore / aft and sideways bracing Easily removed for racing or winter storage, leaving just low profile base on deck Technical Specifications: Radar Type - Dome Material - Aluminium Height - 6.4" (1.9M) Mounting Type - Pole Mount In the Box: Pole mount Top plate Deck strut Mounting hardware  Installation manual *Sold as an Individual

SC104 Radar Pole Mount - 8' Totally universal, the Scanstrut SC104 Pole Mount installs your radar onto the deck or transom of your boat. Supplied as a complete kit, you will have everything you need for a quick and easy installation.  The anodized aluminium base gives choice when deciding where you wish to install the pole mount, it has a rotation of 360 degree that enables the pole to be installed on both sloping transoms and level decks.  The Pole features two cable channels with a cover strip to hold cables in place and out of view.  Made from marine-grade aluminium and coated with a 4-step marine paint system, making sure that your pole mount stays looking its best year in, year out, whatever the oceans throw at it. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS2D, DRS42DL, DRS42DL+, DRS4D / DRS4D-NXT, DRS4W, NavNet (18"), NavNet (24"), SC33 Sat Compass radars Glomex - Pandora v8001, RHEA V8100, Urania V9331, V9000 and V9001 series radars Humminbird - AS 21RD4KW radar Intellian - FB150 in i2, FB250 in i2, FB250R in i2, i1 radars Interphase - Mini RE-1, RE-8, RE-9 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000,  JMA 2343 / 5104 [Radome: NKE-2042] radars Koden - 2kW 12", 4kW [RB715A] radar KVH - TracVision M1, TracVision TV1 radar Lorenz - Lorenz 2kW Lowrance - LRA-1800 / RB714A / DX42, LRA-2400 HD radars Majestic - SATMAR32, SATMAR32D, SATMAR37D Navman - 8000 Series [8084/8120] 18", 8000 Series [8084/8120] 24" radars Nobeltec - 2kW (20"), 4kW [IR2-4D 25" 4Kw] radars Northstar - M series/8000i (18"), M series/8000i (24") radars Raymarine -  33STV radar Seiwa - SWR-1, SWR-8, SWR-9 radars Simrad - GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS -1, MDS -8, MDS -9, MDS-12, NKE-1066 radars Techmarine - T-72.01, T-72.02, T-72.04 radars Features: Adjustable base, able to rotate 360°.  Base enables the pole to be installed on both sloping transoms and level decks.   Unique pole extrusion accommodates two (2)  cable channels with a cover strip to hold cables in place Supplied with two support modules providing maximum fore / aft and sideways bracing Easily removed for racing or winter storage, leaving just low profile base on deck Technical Specifications: Radar Type - Dome Material - Aluminium Height - 8.3" (2.5M) Mounting Type - Pole Mount In the Box: Pole mount Top plate Deck strut Mounting hardware  Installation manual *Sold as an Individual

T-760 Compact Color Radar with 4kW 18" Dome Big radar performance and features are available for any size boat -- and budget with the SI-TEX T-760. A vertically oriented, slim case boasts advanced touch screen technology and a host of professional features. Powerful 4kW output ensures superior target acquisition and tracking in the the most challenging conditions. The T-760 Series case measures only 5.4" W X 8.9" H X 3.5" D. Yet, this system boasts a long list of professional-grade features, including powerful 4kW output, up to 24nm range, multi-speed antenna rotation, standard 50-target AIS tracking capability and standard 10-target MARPA - features often associated with larger, costlier systems. Control of all these features is achieved via the T-760's touch screen LCD display and single rotary encoder dial, for simple, intuitive operation. The series includes the T-760, equipped with an 18-inch compact radome antenna for solid performance in a wide range of conditions and range scale choices from 1/8th nm to 24nm. Both the T-760 and T-761 feature powerful 4kW transmitters, ensuring accurate detection and presentation of targets large and small. Both models also offer multi-speed antenna rotation (16/27/36/48rpm) for optimum target detection and tracking over a range of boat speeds. Among many other notable standard features of the T-760 Series are Relative Motion, True Motion, North-Up, Head-Up and Course-Up presentation modes, Auto or Manual Sea/Rain Clutter modes, 11 Trail Indication settings (including Off and Continuous), and more. With input from a SI-TEX Metadata AIS module (or other AIS receiver), the T-760 Series can track up to 50 AIS targets simultaneously for enhanced navigational safety in crowded waterways. With input of bearing, ship's speed and lat/lon data, the T-760 Series empowers navigators with professional MARPA tracking of up to 10 targets at distances up to 20nm. In the SI-TEX tradition, the T-760 Series radar is ruggedly built to withstand harsh conditions at sea on commercial as well as recreational vessels. SI-TEX's two-year limited warranty and Long Island, New York-based service department are the navigator's assurance of reliable performance and long-term satisfaction Features: 7" color LCD display 10M Cable Intuitive touch screen/rotary dial control Standard 50 target AIS tracking Standard 10 target MARPA Multi-speed (16-48 rpm) antenna rotation for optimum performance in real-world conditions Features include Relative Motion/True Motion/Head-Up/North-Up Optional color RGB video output

SC101 Radar Pole Mount - 6' Totally universal, the Scanstrut SC101 Pole Mount installs your radar onto the deck or transom of your boat. Supplied as a complete kit, you will have everything you need for a quick and easy installation.  The anodized aluminium base gives choice when deciding where you wish to install the pole mount, it has a rotation of 360 degree that enables the pole to be installed on both sloping transoms and level decks.  The Pole features two cable channels with a cover strip to hold cables in place and out of view.  Made from marine-grade aluminium and coated with a 4-step marine paint system, making sure that your pole mount stays looking its best year in, year out, whatever the oceans throw at it. Compatible with: B & G - 3G/4G, HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar Lowrance - 3G/4G radars Raymarine - QUANTUM, QUANTUM 2, RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Adjustable base, able to rotate 360°.  Base enables the pole to be installed on both sloping transoms and level decks.   Unique pole extrusion accommodates two (2)  cable channels with a cover strip to hold cables in place Supplied with two support modules providing maximum fore / aft and sideways bracing Easily removed for racing or winter storage, leaving just low profile base on deck Technical Specifications: Radar Type - Dome Material - Aluminium Height - 6.4" (1.9M) Mounting Type - Pole Mount In the Box: Pole mount Top plate Deck strut Mounting hardware  Installation manual *Sold as an Individual

SC102 Radar Pole Mount - 8' Totally universal, the Scanstrut SC102 Pole Mount installs your radar onto the deck or transom of your boat. Supplied as a complete kit, you will have everything you need for a quick and easy installation.  The anodized aluminium base gives choice when deciding where you wish to install the pole mount, it has a rotation of 360 degree that enables the pole to be installed on both sloping transoms and level decks.  The Pole features two cable channels with a cover strip to hold cables in place and out of view.  Made from marine-grade aluminium and coated with a 4-step marine paint system, making sure that your pole mount stays looking its best year in, year out, whatever the oceans throw at it. Compatible with: B & G - 3G/4G, HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar Lowrance - 3G/4G radars Raymarine - QUANTUM, QUANTUM 2, RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Adjustable base, able to rotate 360°.  Base enables the pole to be installed on both sloping transoms and level decks.   Unique pole extrusion accommodates two (2)  cable channels with a cover strip to hold cables in place Supplied with two support modules providing maximum fore / aft and sideways bracing Easily removed for racing or winter storage, leaving just low profile base on deck Technical Specifications: Radar Type - Dome Material - Aluminium Height - 8.3" (2.5M) Mounting Type - Pole Mount In the Box: Pole mount Top plate Deck strut Mounting hardware  Installation manual *Sold as an Individual

Radar and TV Antenna Mounts  

Sun-DURA® Styled-to-Fit Boat Cover for 18.5' Sterndrive Aluminum Boats with High Forward Mounted Windshield - Grey *90" Max Beam Width Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature: 1/4″ strong & durable shock cord encased into hem for a snug fit Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover *Trailerable boat covers must be properly installed and tied down. From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you! Sun-DURA® Excellent Quality 100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty) Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA