Tuthill 4C2FV-C-A-7 Gear Pump (505000) Tuthill 4C2FV-C-A-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Has Internal Relief Valve. Relief valve is set at 90 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view). Tang Shaft. Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Relief Valve:Relief valve is factory set to 90 PSI for adjustment between 30-225 PSI. Other PSI ranges available.  Shaft Seal:Sleeve Bushing Lip Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.

Tuthill 0LEV-C-A-7 Pump Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.   Features : Pump Body: Cast Iron Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI. Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.

Tuthill 1LEV-C-A-7 Pump 3.2Gpm Tang Shaft Cast Iron Rotary Gear Pump Pump End Only L Series Pump Cast Iron Construction NO motor Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field) Clockwise rotation only (from shaft end view) Tang Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 2LEV-C-A-7 Pump 6.2Gpm Short Shaft Type: Internal Gear Maximum Flow Rate: 6.2 gpm Max Pressure: 300 psi Inlet/Outlet Port Sizes: 1/2 in NPT Pump Body Material: Cast Iron Wetted Materials: Steel, Carbon, Bronze, P/M Steel, Carbon O-Ring Material: Viton, Neoprene, EPR Seal: Viton Mechanical Seal

Tuthill 2LEV-CC-A-7 Pump Tang Drive Cast Iron Rotary Gear Pump Pump End Only L Series Pump Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field) Counter-clockwise rotation only (from shaft end view) Tang Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement Internal Rotary Gear Design Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 4105V-CC-A-7 Pump Tang Shaft Viton Cast Iron Rotary Gear Pump Pump End Only 5.6 GPM 4105 Series Pump Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field) COUNTER Clockwise rotation only (from shaft end view) Tang Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT

Tuthill 1LEV-C-A-88513-7 Pump And Motor

Tuthill 1LEV-C-A-88520-7 Pump W/3Ph 1/2Hp Motor

Tuthill 1LEV-C-A-88494-7 Pump And Motor

Tuthill 1LEV-C-A-88462 Pump 3.2Gpm 1/2Hp 1725Rpm 1P

Micropump GA-V21.C8FS.A Pump Head A Mount Micropump 81113 GA-V21.C8FS.A Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81113 constructed of Base Material 316SS, Gear Material Carbon Graphite (Pin Drive) and Shaft Material 316SS Pump Series: GA Series Ports/Fittings: 1/8-27 (F) NPT Side Ports Min Speed (RPM): 500 Max Speed (RPM): 5500 Max Pressure (psi): 300 Min Temperature (°C): -46 Max Temperature (°C): 177 Max Diff. Pressure (psi): 40 Displacement (ml/rev): 0.042 Design: Standard Design Gear Set: 0.063/2/48 (0.042ml/rev) Gear Material: Carbon Graphite (Pin Drive) Static Seals: PTFE Base Materials: 316SS Drive Mount: MP Housing Bypass: No Driven: Ferrite Driving Magnet: Not Included High System Pressure: No Bushings: None Shafts: 316SS Gear Trim: None Model: GA-V21.C8FS.A

Micropump GA-X21.C8FS.A Pump Head A Mount Micropump 81112 GA-X21.C8FS.A Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81112 constructed of Base Material 316SS, Gear Material Carbon Graphite (Pin Drive) and Shaft Material 316SS. Pump Series: GA Series Ports/Fittings: 1/8-27 (F) NPT Side Ports Min Speed (RPM): 500 Max Speed (RPM): 5500 Max Pressure (psi): 300 Min Temperature (°C): -46 Max Temperature (°C): 177 Max Diff. Pressure (psi): 20 Displacement (ml/rev): 0.017 Design: Standard Design Gear Set: 0.063/2/120 (0.017 ml/rev) Gear Material: Carbon Graphite (Pin Drive) Static Seals: PTFE Base Materials: 316SS Drive Mount: MP Housing Bypass: No Driven: Ferrite Driving Magnet: Not Included High System Pressure: No Bushings: None Shafts: 316SS Gear Trim: None Model: GA-X21.C8FS.A

Micropump GA-V23.C8FS.A Pump Head A Mount Micropump 81114 GA-V23.C8FS.A Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81114 constructed of Base Material 316SS, Gear Material Carbon Graphite (Pin Drive) and Shaft Material 316SS. Pump Series: GA Series Ports/Fittings: 1/8-27 (F) NPT Side Ports Min Speed (RPM): 500 Max Speed (RPM): 5500 Max Pressure (psi): 300 Min Temperature (°C): -46 Max Temperature (°C): 177 Max Diff. Pressure (psi): 40 Displacement (ml/rev): .08400000000000001 Design: Standard Design Gear Set: 0.126/2/48 (0.084 ml/rev) Gear Material: Carbon Graphite (Pin Drive) Static Seals: PTFE Base Materials: 316SS Drive Mount: MP Housing Bypass: No Driven: Ferrite Driving Magnet: Not Included High System Pressure: No Bushings: None Shafts: 316SS Gear Trim: None Model: GA-V23.C8FS.A

Micropump GB-P35.JF5S.A Pump Head A Mount Micropump L24041 GB-P35.JF5S.A Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. L24041 constructed of Base Material 316SS, Gear Material PEEK (carbon fiber/ptfe) and Shaft Material 316SS. Pump Series: GB Series Ports/Fittings: 1/8-27 (F) NPT Side Ports Min Speed (RPM): 500 Max Speed (RPM): 5500 Max Pressure (psi): 300 Min Temperature (°C): -29 Max Temperature (°C): 176.666666666667 Max Diff. Pressure (psi): 57.77777777777777 Displacement (ml/rev): 1.17 Design: Standard Design Gear Set0.350/3/25 (1.17 ml/rev) Gear Material: PEEK (carbon fiber/ptfe) Static Seals: TEV (PTFE encap Viton®) Base Materials: 316SS Drive Mount: MP Housing Bypass: No Driven: Ferrite Driving Magnet: Not Included High System Pressure: No Bushings: PEEK Shafts: 316SS Gear Trim: None Model: GB-P35.JF5S.A

Micropump GJ-N21.FF2S.A Pump Head A Mount Micropump 81511 GJ-N21.FF2S.A Mag-Drive Gear Pump Head Requires A-Mount compatible Drive 81511 constructed of Base Material 316SS Gear Material PTFE Shaft Material 316SS 18 GPH @ 80 PSI, max based on 100cp at 3450RPM