Tuthill 1LEV-CC-7 Pump 3.2 Gpm 1/2" Ports Pump Body: Cast Iron Relief Valve: Relief valve is factory set to 55 PSI for adjustment between 55-120 PSI.  Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT. Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 1LE-7 Pump 3.2Gpm 1/2"Ports Viton Cast Iron Rotary Gear Pump Pump End Only, NO motor Cast Iron Construction Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 00LEV-CC-7 Pump 1Gpm 1/2Ports Cast Iron Rotary Gear Pump Pump End Only, NO motor Cast Iron Construction Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field) Counter Clockwise rotation only (from shaft end view) Inlet Port is 3/8 inch NPT, Discharge Port is 3/8 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 0.5 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU      

Tuthill 1LEV-C-7 Pump 3.2 Gpm Cast Iron Rotary Gear Pump Pump End Only Tuthill L Series Pump Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view) Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 4C2EV-CC-7 Pump 36Gpm Ccw W/Rv Tuthill 4C2EV-CC-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Has Internal Relief Valve. Relief valve is set at 90 PSI (can be adjusted in field). COUNTER Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Relief Valve:Relief valve is factory set to 90 PSI for adjustment between 30-225 PSI. Other PSI ranges available.  Shaft Seal:Sleeve Bushing Lip Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.

Gianneschi EXCELSIOR-3 Bronze 1.25" Ports Hand Pump

Tuthill 1LEV-C-A-88513-7 Pump And Motor

Tuthill 1LEV-C-A-88494-7 Pump And Motor

Tuthill 2LEVK-C-7 Pump 6.2Gpm with Reverse & Outer Bearing

Tuthill 2LEV-H-C Pump 6.2Gpm High Head

Tuthill 1LEV-C-A-88462 Pump 3.2Gpm 1/2Hp 1725Rpm 1P

Tuthill 1LEV-C-A-88520-7 Pump W/3Ph 1/2Hp Motor

Tuthill 1LEV-C-A-7 Pump 3.2Gpm Tang Shaft Cast Iron Rotary Gear Pump Pump End Only L Series Pump Cast Iron Construction NO motor Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field) Clockwise rotation only (from shaft end view) Tang Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 2LEV-C-A-7 Pump 6.2Gpm Short Shaft Type: Internal Gear Maximum Flow Rate: 6.2 gpm Max Pressure: 300 psi Inlet/Outlet Port Sizes: 1/2 in NPT Pump Body Material: Cast Iron Wetted Materials: Steel, Carbon, Bronze, P/M Steel, Carbon O-Ring Material: Viton, Neoprene, EPR Seal: Viton Mechanical Seal

Tuthill 2RC2AS-RH Pump with Tang Shaft Tuthill Pump 2RC2AS-RH